College of Engineering and Design

Research Output 1997 2019

1997

On linear partial differential operators on a formal Gevrey space

YAMAZAWA, H., 1997 Jun 1, In : Default journal. 11, p. 187-200

Research output: Contribution to journalArticle

1998
2000

A study on communication tool for urban disaster prevention using multimedia

Saito, K. & Shinozaki, M., 2000, Computing in Civil and Building Engineering. Fruchter, R., Pena-Mora, F., Roddis, W. M. K., Fruchter, R., Pena-Mora, F. & Roddis, W. M. K. (eds.). Vol. 1. p. 396-401 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Disaster prevention
Urban planning
Communication
Disasters
Geographic information systems
1 Citation (Scopus)

Communication oriented WebGIS for collaborative urban planning

Chiba, S. & Shinozaki, M., 2000, Computing in Civil and Building Engineering. Fruchter, R., Pena-Mora, F., Roddis, W. M. K., Fruchter, R., Pena-Mora, F. & Roddis, W. M. K. (eds.). Vol. 1. p. 233-239 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Urban planning
Geographic information systems
Internet
Communication

Daylight simulation in urban open space using radiance

Shinozaki, M., Kuwata, H. & Saito, K., 2000, Proceedings of the 8th International Conference on Computing in Civil and Building Engineering. Vol. 279. p. 1542-1549 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Daylight simulation
Planning
2001

Singular Solutions or the Briot-Bouquet Type Partial Differential Equations

YAMAZAWA, H., 2001 Oct 24, In : Default journal.

Research output: Contribution to journalArticle

2004

On formal solution and genuine solution for some partial differential equations

YAMAZAWA, H., 2004 Oct 29, In : Default journal.

Research output: Contribution to journalArticle

2005

Believing that p because one remembers that p

Sakuragi, S., 2005 Nov 11, In : Default journal.

Research output: Contribution to journalArticle

2006

Explanation by appeal to one's remembering that p

Sakuragi, S., 2006 Aug 24, In : Default journal.

Research output: Contribution to journalArticle

Frege's Redundancy Thesis

Sakuragi, S., 2006 Jun 25, In : Philosophy of Science. 39, p. 29-45

Research output: Contribution to journalArticle

The credibility of the posted information in a recommendation system based on a map

Yamamoto, K., Katagami, D., Nitta, K., Aiba, A. & Kuwata, H., 2006, Proceedings of the 15th International Conference on World Wide Web. p. 985-986 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Recommender systems
Display devices
2007

A technological study of multiple application as common platform for time-space data using Google Earth

Saito, K., Shinozaki, M. & Hitaka, K., 2007 Jun, In : AIJ Journal of Technology and Design. 13, 25, p. 317-320 4 p.

Research output: Contribution to journalArticle

Earth (planet)
Geographic information systems
Global positioning system
Computer aided design
Planning

日本の初期テレビ受像機と欧米のテレビ受像機の関係

Translated title of the contribution: Relations Between Early Japanese Television set and Ones OverseasMasunari, K. & Ishimura, S., 2007 Dec 14, In : Technological Innovation in Japan -Collecting Experiences and Establishing Knowledge Foundation-. 3, p. 49-52 4 p.

Research output: Contribution to journalArticle

Purchasing Power
Lifestyle
Japan

日本におけるテレビジョン受像機のデザイン変遷(1): 草創期から普及期まで

Translated title of the contribution: Transition of television set design in Japan (1): From launch to diffusion on the marketMasunari, K., 2008 Sep 30, In : Lournal of Lifology. 13, p. 110-123 14 p.

Research output: Contribution to journalArticle

Television receivers
Television
Television broadcasting
2009
1 Citation (Scopus)

An approach to robotization of rokogi-wasen

Nakano, T., Usui, S. & Shimada, A., 2009, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 112-117 6 p. 5334708

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boats
Motion control
Airfoils
Propulsion
Drag
1 Citation (Scopus)

Memory and Knowledge

Sakuragi, S., 2009 Nov 28, In : Default journal.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Sensor-less grasping control on two-fingered robot hands

Shimada, A., Sonoda, K. & Satoh, Y., 2009, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 40-45 6 p. 5335115

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Robots
Sensors
Observability

テレビ受像機の普及期における「嵯峨」の誕生とシリーズ展開: 家具調テレビに関する研究(1)

Translated title of the contribution: Birth and series development of Saga in the market settlement of television set: A study on design of Kagu-cho TV (1)Masunari, K. & Ishimura, S., 2009 Jul, In : Japanese Society for Science of Design. 56, 2, 10 p.

Research output: Contribution to journalArticle

Television receivers
Television
Wood

日本におけるテレビジョン受像機のデザイン変遷(2): 白黒テレビジョン受像機の成熟期からカラーテレビジョン受像機の普及期まで

Translated title of the contribution: Transition of television set design in Japan (2): Shift from monochrome to color television in late 1960sMasunari, K., 2009 Mar 31, In : Lournal of Lifology. 14, p. 3-16 14 p.

Research output: Contribution to journalArticle

Set Design
Japan
Monochrome
1960s
Lifestyle
2010
3 Citations (Scopus)

A joint angle sensorless grasping control on two-fingered robot hands

Sonoda, K. I. & Shimada, A., 2010, International Workshop on Advanced Motion Control, AMC. p. 774-779 6 p. 5464029

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Robots
Sensors
Electric motors
Feedback control
6 Citations (Scopus)

A movement control on indoor blimp robots

Shimada, A., Furukawa, H. & Uchimura, Y., 2010, Proceedings of the SICE Annual Conference. p. 490-491 2 p. 5602803

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airships
Robots
Control theory
Controllers
4 Citations (Scopus)

Direct tilt angle control on inverted pendulum mobile robots

Shimizu, Y. & Shimada, A., 2010, International Workshop on Advanced Motion Control, AMC. p. 234-239 6 p. 5463993

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pendulums
Mobile robots
Sensors
13 Citations (Scopus)

Electroconductive ceramic tooling for dry deep drawing

Tamaoki, K., Manabe, K. I., Kataoka, S. & Aizawa, T., 2010 Jan 1, In : Journal of Materials Processing Technology. 210, 1, p. 48-53 6 p.

Research output: Contribution to journalArticle

Electric discharge machining
Deep drawing
Ceramic dies
Electric discharges
Tool steel
1 Citation (Scopus)

Obstacle avoidance control on omnidirectional vehicle robots using range sensor

Shimada, A., Kiddee, P. & Nishi, Y., 2010 Jul 15, In : Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 172, 1, p. 58-68 11 p.

Research output: Contribution to journalArticle

Collision avoidance
Robots
Sensors
Intelligent vehicle highway systems
Motion planning

On Memory Knowledge

Sakuragi, S., 2010 Aug 1, In : The Journal of The Philosophy of Science Society, Japan. 43, p. 61-78

Research output: Contribution to journalArticle

2 Citations (Scopus)

Phase shift pulse Brillouin optical time domain analysis (PSP-BOTDA) employing Dual Golay Codes

Bin Zan, M. S. D., Sasaki, T., Horiguchi, T. & Uchiyama, D., 2010, International Conference on Computer and Communication Engineering, ICCCE'10. 5556827

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time domain analysis
Phase shift
Pumps
Signal to noise ratio
Fiber optics

家具調テレビ「嵯峨」のデザイン創出過程: 家具調テレビに関する研究(2)

Translated title of the contribution: Design development process of Kagucho TV "Saga" : A study on design of Kagucho-TV (2) Masunari, K. & Ishimura, S., 2010 Jan, In : Japanese Society for Science of Design. 56, 5, 10 p.

Research output: Contribution to journalArticle

Television
2011
1 Citation (Scopus)

A controller design on tendon-driven mechanisms

Shimada, A. & Maruta, A., 2011, Proceedings of the SICE Annual Conference. p. 2684-2685 2 p. 6060433

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Endoscopy
Tendons
Medical applications
Motion control
Industrial applications

An approach to sensor-less grasping nd movement control on two-fingered robot hands

Shimada, A., Sonoda, K. & Unuma, S., 2011, Proceedings of the SICE Annual Conference. p. 917-918 2 p. 6060624

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Robots
Sensors
Electric motors
Friction
5 Citations (Scopus)

An approach to SysML and simulink based motion controller design for inverted pendulum robots

Phaoharuhansa, D. & Shimada, A., 2011, Proceedings of the SICE Annual Conference. p. 2190-2193 4 p. 6060336

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pendulums
Robots
Controllers
Control systems
Motion control
1 Citation (Scopus)

An approach to wind harness control on blimp robots

Shimada, A. & Furukawa, H., 2011, Proceedings of the SICE Annual Conference. p. 368-369 2 p. 6060681

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airships
Robots
Controllers

Approximate enclosed space using virtual agent

Indraprastha, A. & Shinozaki, M., 2011, Design Computing and Cognition '10. p. 285-303 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Architectural design
Enclosures
Identification (control systems)
Object detection

Computational method for mapping quality of architectural space

Indraprastha, A. & Shinozaki, M., 2011, Circuit Bending, Breaking and Mending - Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2011. p. 473-482 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational methods
Physical properties
2 Citations (Scopus)

Design and implementation of basic framework for integration of Robot Technology elements in intelligent Space

Sasaki, T., Toshima, Y. & Hashimoto, H., 2011 Aug, In : Journal of Robotics and Mechatronics. 23, 4, p. 523-531 9 p.

Research output: Contribution to journalArticle

Sensor nodes
Scalability
Actuators
Robots
Electric fuses
2 Citations (Scopus)

Development of precise micro press forming system for fabrication of micro parts

Yang, M., Aizawa, T., Nakano, S. & Ito, K., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1093-1096 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication
Forging
Metal forming
Joining
Metal foil
6 Citations (Scopus)

Dry transfer stamping by nano-laminated DLC-coated tool

Morita, H., Aizawa, T., Yoshida, N. & Kurozumi, S., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1103-1108 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Stamping
Diamonds
Carbon
Coatings
1 Citation (Scopus)

Elaboration model for mapping architectural space

Indraprastha, A. & Shinozaki, M., 2011 Nov, In : Journal of Asian Architecture and Building Engineering. 10, 2, p. 351-358 8 p.

Research output: Contribution to journalArticle

Computational methods
Physical properties
Elaboration
evaluation
4 Citations (Scopus)

Fine micro-stamping system for micro-pattern printing onto polymers and glasses

Aizawa, T., Itoh, K. & Fukuda, T., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1097-1102 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stamping
Printing
Polymers
Glass
Displacement control
9 Citations (Scopus)

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E., 2011, Advanced Materials Research. Vol. 188. p. 578-583 6 p. (Advanced Materials Research; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Alloy steel
Cast iron
Titanium alloys
Wear of materials
3 Citations (Scopus)

Position measurement of piles using a laser range finder for accurate and efficient pile driving

Sasaki, T., Huang, X., Hashimoto, H. & Inoue, F., 2011, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. p. 241-246 6 p. 6027128

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pile driving
Position measurement
Range finders
Piles
Lasers