College of Engineering and Design

Research Output

2018

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 Oct 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-September. p. 1229-1232 4 p. 8502661

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welcome message

Berger, T., Borba, P., Calikli, G., Botterweck, G., Männistö, T., Nadi, S., Kehrer, T., Benavides, D., Martinez, J., Seidl, C., Guo, J., Collet, P., Rubin, J., Diaz, O., Rabiser, R., Elsner, C., Capilla, R., Noda, N., Andersson, J., Mousavi, M. R. & 10 others, Wortmann, A., Schulze, S., Xiong, Y., Bonifacio, R., Ho-Quang, T., Wohlrab, R., Mukelabai, M., Andric, T., Bosch, J. & Hao, D., 2018 Aug 20, In : ACM International Conference Proceeding Series. 1, p. x

Research output: Contribution to journalEditorial

2017

A study of dry drilling method on chromium molybdenum steel

Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I., 2017, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.

Research output: Contribution to journalArticle

A study on the life-cycle costs of maintaining office building elevators

Nakamura, H. & Shinozaki, M., 2017 Jun 1, In : AIJ Journal of Technology and Design. 23, 54, p. 691-696 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 Dec 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-January. p. 8273-8278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 Jan 1, In : Procedia Engineering. 207, p. 1027-1032 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Low temperature plasma nitriding of inner surfaces in stainless steel mini-/micro-pipes and nozzles

Aizawa, T. & Wasa, K., 2017, In : Micromachines. 8, 5, 157.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Mechanical and Corrosion Properties of AZ31 Mg Alloy Processed by Equal-Channel Angular Pressing and Aging

Shahar, I. A., Hosaka, T., Yoshihara, S. & Macdonald, B. J., 2017, In : Procedia Engineering. 184, p. 423-431 9 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Model Predictive Control for an Inverted-pendulum Robot with Time-varying Constraints

Ohhira, T. & Shimada, A., 2017 Jul 1, In : IFAC-PapersOnLine. 50, 1, p. 776-781 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

On multisummability of formal solutions with logarithm terms for some linear partial differential equations

Yamazawa, H., 2017 Jan 1, In : Funkcialaj Ekvacioj. 60, 3, p. 371-406 36 p.

Research output: Contribution to journalArticle

Phase transformation induced by high nitrogen content solid solution in the martensitic stainless steels

Farghali, A. & Aizawa, T., 2017, In : Materials Transactions. 58, 4, p. 697-700 4 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Plasma Polishing and Finishing of CVD-Diamond Coated WC (Co) Dies for Dry Stamping

Yunata, E. E., Aizawa, T., Tamaoki, K. & Kasugi, M., 2017 Jan 1, In : Procedia Engineering. 207, p. 2197-2202 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 Jan 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (eds.). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, Vol. 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; vol. 483).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

STRAIN ANALYSES OF NONLINEAR CRACK BEHAVIOR AT ELEVATED TEMPERATURE BY FINITE ELEMENT METHOD AND MOIRE TOPOGRAPHICAL METHOD.

Aizawa, T., Yagawa, G. & Ando, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

松下幸之助のデザイン観と真野善一の苦悩

Translated title of the contribution: Matsushita Konosuke's design view and Zenichi Mano's anguishMasunari, K., 2017 Mar 15, In : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

Research output: Contribution to journalArticle

2016

A collaborative task experiment by multiple robots in a human environment using the Kukanchi system

Fujimoto, K., Sasaki, T., Sugaya, M., Yoshimi, T., Mizukawa, M. & Matsuhira, N., 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, Vol. 9835. p. 276-282 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9835).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 Jun 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Holomorphic and singular solutions of q-difference-differential equations of briot-bouquet type

Yamazawa, H., 2016, In : Funkcialaj Ekvacioj. 59, 2, p. 185-197 13 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Aizawa, T., Fukuda, T. & Morita, H., 2016, In : Manufacturing Review. 3, 2016004.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2016 Apr 1, In : Manufacturing Letters. 8, p. 16-20 5 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 Aug 30, In : Biofabrication. 8, 3, 035016.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 Aug 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, Vol. 2016-August. p. 570-579 10 p. 7529916

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pulsewise-motion controlled stamping for microtexturing Onto Aluminum sheet

Aizawa, T. & Fukuda, T., 2016 Mar 1, In : Journal of Micro and Nano-Manufacturing. 4, 1, 014502.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 Jul 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (eds.). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 0).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Tessellation for wide angle foveated image with 4 regions based on overlapping circular receptive field mapping

Shimizu, S. & Hasebe, N., 2016 Dec 21, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 6187-6192 6 p. 7793888. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 Jan 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

Research output: Chapter in Book/Report/Conference proceedingConference contribution

日本における電子レンジのデザイン変遷: 新聞記事と広告調査からみえる普及過程

Translated title of the contribution: Transition of Microwave Oven Design in Japan: Diffusion process of a microwave oven according to newspaper articles and advertising researchMasunari, K., 2016 Nov 10, In : Design Research. 72, p. 64-65 2 p.

Research output: Contribution to journalArticle

2015

A path motion planning for humanoid climbing robot

Nguyen, D. & Shimada, A., 2015 Jan 8, Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013. Al-Begain, K., Al-Begain, K., Al-Dabass, D., Al-Dabass, D., Orsoni, A., Orsoni, A., Cant, R., Cant, R. & Zobel, R. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 179-184 6 p. 7004939. (Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Attitude control of quadrotor in consideration of the effects of a pole based on limited pole placement

Sugawara, Y. & Shimada, A., 2015 Aug 1, In : IEEJ Transactions on Industry Applications. 135, 8, p. 827-835 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (eds.). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 May 1, In : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

Research output: Contribution to journalArticle

Micro-texturing into DLC/diamond coated molds and dies via high density oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2015, In : Manufacturing Review. 2, 2015015.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, Vol. 529. p. 51-56 6 p. (Communications in Computer and Information Science; vol. 529).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 Jan 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., Vol. 2014-January. 7017059

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Parametric borel summability for some semilinear system of partial differential equations

Yamazawa, H. & Yoshino, M., 2015, In : Opuscula Mathematica. 35, 5, p. 825-845 21 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Performance of diamond-like carbon coated tool in dry cutting of aluminum alioys

Yokota, T., Sawa, T. & Yokouchi, M., 2015 Jun 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 6, p. 604-609 6 p.

Research output: Contribution to journalArticle

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels ∗

Katoh, T., Aizawa, T. & Yamaguchi, T., 2015, In : Manufacturing Review. 2, 2015004.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 09002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Q-analogue of summability of formal solutions of some linear q-difference-differential equations

Tahara, H. & Yamazawa, H., 2015 Jan 1, In : Opuscula Mathematica. 35, 5, p. 713-738 26 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 08002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Towards non-mechanical wide angle fovea sensor - Fundamental design by liquid crystal lens cell

Shimizu, S. & Sato, S., 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 3632-3637 6 p. 7392665. (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)