College of Engineering and Design

Research Output

Filter
Conference contribution

Warm bulge forming of small diameter A1100 aluminum tube

Mitsui, S., Miyagawa, T., Yasui, H. & Yoshihara, S., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 149-154 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 Jan 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Visual feedback control for endoscopes using tension estimation

Gotoh, K. & Shimada, A., 2008 Dec 1, AMC'08 - 10th International Workshop on Advanced Motion Control, Proceedings. p. 165-169 5 p. 4516060. (International Workshop on Advanced Motion Control, AMC; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 Oct 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-September. p. 1229-1232 4 p. 8502661

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Using Coq in specification and program extraction of Hadoop MapReduce applications

Ono, K., Hirai, Y., Tanabe, Y., Noda, N. & Hagiya, M., 2011 Nov 17, Software Engineering and Formal Methods - 9th International Conference, SEFM 2011, Proceedings. p. 350-365 16 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 7041 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Usability and design guideline for designing single handle faucet’s and handle shape

Takagi, R., Hashida, N. & Takeuchi, H., 2019 Jan 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (eds.). Springer Verlag, p. 89-98 10 p. (Advances in Intelligent Systems and Computing; vol. 794).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uniform optical flow model by foveation effect for virtual cylindrical screen algorithm

Shimizu, S. & Hashizume, T., 2009 Dec 1, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 1121-1126 6 p. 5335010. (ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultra-smoothness grinding of glass with # 140 metal bond diamond wheel

Sawa, T. & Yasui, H., 2004 Dec 1, Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004. Chen, W., Yamane, Y., Fan, R. & Ochi, A. (eds.). p. 215-218 4 p. (Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultra-smoothness grinding of cemented carbide using newly developed method

Yasui, H., Yamamoto, Y., Miyamoto, K., Furuya, S. & Sawa, T., 2005 Dec 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Twin agents: Network-assisted disconnected operation and distributed processing for mobile communication

Ochi, D. & Yamazaki, K., 2004 Jun 16, Proceedings - 2004 International Symposium on Applications and the Internet (Saint 2004). p. 31-39 9 p. (Proceedings - International Symposium on Applications and the Internet).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Trajectory tracking for wheeled inverted pendulum robot using tilt angle control

Phaoharuhansa, D. & Shimada, A., 2013 Dec 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4288-4293 6 p. 6699824. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Towards non-mechanical wide angle fovea sensor - Fundamental design by liquid crystal lens cell

Shimizu, S. & Sato, S., 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 3632-3637 6 p. 7392665. (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Towards air hockey robot with tactics - Statistical analysis from measurement of eye movement

Ogawa, M., Ikeuchi, K., Sato, Y., Kudoh, S., Tomizawa, T., Suehiro, T. & Shimizu, S., 2012 Oct 23, 2012 IEEE International Conference on Mechatronics and Automation, ICMA 2012. p. 34-39 6 p. 6282343. (2012 IEEE International Conference on Mechatronics and Automation, ICMA 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Thin client based user terminal architecture for ubiquitous computing environment

Takahashi, T., Tanaka, S., Yamazaki, K. & Mizuno, T., 2005 Dec 1, Embedded and Ubiquitous Computing - EUC 2005 Workshops: UISW, NCUS, SecUbiq, USN, and TAUES, Proceedings. p. 111-120 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3823 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The influence of the mechanism of the acoustic sound amplifier on sound transmission

Sato, K. & Yang, W., 2019 Jan 1, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2018 International Conference on Affective and Pleasurable Design, 2018. Fukuda, S. (ed.). Springer Verlag, p. 259-268 10 p. (Advances in Intelligent Systems and Computing; vol. 774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The demonstration of network-assisted disconnected operation for mobile communication

Ochi, D. & Yamazaki, K., 2004 Jun 14, Proceedings - 2004 International Symposium on Applications and the Internet Workshops (Saint 2004Workshops). p. 299-302 4 p. (Proceedings - International Symposium on Applications and the Internet Workshops).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The credibility of the posted information in a recommendation system based on a map

Yamamoto, K., Katagami, D., Nitta, K., Aiba, A. & Kuwata, H., 2006 Dec 1, Proceedings of the 15th International Conference on World Wide Web. p. 985-986 2 p. (Proceedings of the 15th International Conference on World Wide Web).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The cooperative control system of the robot finger using shape memory alloys and Electrical Motors

Terauchi, M., Zenba, K. & Shimada, A., 2008 Dec 1, AMC'08 - 10th International Workshop on Advanced Motion Control, Proceedings. p. 733-737 5 p. 4516158. (International Workshop on Advanced Motion Control, AMC; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 Jul 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (eds.). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 0).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on UI of charger in EV charging station

Yang, W., Hirohashi, T. & Choi, Y., 2018, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 410-417 8 p. (Communications in Computer and Information Science; vol. 852).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on improvement of accuracy in end mill machining

Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 Dec 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on emotional changes by visual movements and sounds in the virtual space: Focused on cases of producing digital wind-bell applications

Seok, W. M., Yang, W. S., Jeung, J. H. & Pan, Y. H., 2010, Proceedings of the 7th International Conference on Design and Emotion. (Proceedings of the 7th International Conference on Design and Emotion).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 08002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simultaneous localization assistance for multiple mobile robots using particle filter based target tracking

Jayasekara, P. G., Palafox, L., Sasaki, T., Hashimoto, H. & Lee, B. H., 2010 Dec 1, Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability, ICIAfS 2010. p. 469-474 6 p. 5715707. (Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability, ICIAfS 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Sensor-less grasping control on two-fingered robot hands

Shimada, A., Sonoda, K. & Satoh, Y., 2009 Dec 1, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 40-45 6 p. 5335115. (ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Saliency map for wide angle fovea vision sensor

Murakami, R., Shimizu, S., Hasebe, N. & Yamazaki, T., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5481-5486 6 p. 8591050. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Robust Localization and Position Control for Mobile Robot Using EKF with Disturbance Estimation

Shimada, A., 2018 Oct 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 312-315 4 p. 8495723

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Research on user-centered information design in SVOD service

Yang, W., Yahiro, S. & Sato, K., 2018 Jan 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 129-135 7 p. (Communications in Computer and Information Science; vol. 850).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on the relationship between experienced factors and configuration of products in a space

Yang, W. S., 2010, Proceedings - APCHI-ERGOFUTURE 2010. p. 686-692 7 p. (Proceedings - APCHI-ERGOFUTURE 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, Vol. 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; vol. 483).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Research for relief of discomfort of sound user interface (sui)

Yang, W., 2018 Jan 1, 15th International Design Conference, DESIGN 2018. Storga, M., Pavkovic, N., Bojcetic, N., Skec, S. & Marjanovic, D. (eds.). Faculty of Mechanical Engineering and Naval Architecture, Vol. 3. p. 1489-1498 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research directions for ubiquitous services

Yamazaki, K., 2004 Jun 16, Proceedings - 2004 International Symposium on Applications and the Internet (Saint 2004). 1 p. (Proceedings - International Symposium on Applications and the Internet).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 Jan 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (eds.). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantitative analysis of tennis experts' eye movement skill

Shimizu, S., Kadogawa, T., Kikuchi, S. I. & Hashizume, T., 2014 Jan 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 203-207 5 p. 6823282. (International Workshop on Advanced Motion Control, AMC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Project report: High-reliable object-oriented embedded software design

Kishi, T., Aoki, J., Nakajima, S., Noda, N. & Katayama, T., 2004 Sep 24, Proceedings - Second IEEE Workshop on Software Technologies for Future Embedded and Ubiquitous Systems. Mock, M., Nakajima, T. & Moody, S. (eds.). p. 144-148 5 p. (Proceedings - Second IEEE Workshop on Software Technologies for Future Embedded and Ubiquitous Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Power saving technique based on simple moving average for multi-channel Ethernet

Imaizumi, H., Nagata, T., Kunito, G., Yamazaki, K. & Morikawa, H., 2009 Nov 10, 2009 14th OptoElectronics and Communications Conference, OECC 2009. 5213197. (2009 14th OptoElectronics and Communications Conference, OECC 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Power saving mechanism based on simple moving average for 802.3ad link aggregation

Imaizumi, H., Nagata, T., Kunito, G., Yamazaki, K. & Morikawa, H., 2009 Dec 1, 2009 IEEE Globecom Workshops, Gc Workshops 2009. 5360735. (2009 IEEE Globecom Workshops, Gc Workshops 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

19 Citations (Scopus)

Potentials of Galilean and Keplerian Liquid Crystal Zoom Lens System

Shimizu, S., Hirai, H., Kawamura, M. & Sato, S., 2018 Oct 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 308-311 4 p. 8495813

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Position measurement system for cylindrical objects using laser range finder

Tamura, H., Sasaki, T., Hashimoto, H. & Inoue, F., 2010 Jan 1, Proceedings of SICE Annual Conference 2010, SICE 2010 - Final Program and Papers. Society of Instrument and Control Engineers (SICE), p. 291-296 6 p. 5602017. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Position measurement of piles using a laser range finder for accurate and efficient pile driving

Sasaki, T., Huang, X., Hashimoto, H. & Inoue, F., 2011 Oct 17, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2011. p. 241-246 6 p. 6027128. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Position estimation based on the target shape information using laser range finders for Intelligent Space

Sasaki, T., Tamura, H., Hashimoto, H. & Inoue, F., 2010 Dec 1, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2010. p. 605-610 6 p. 5695943. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 09002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase shift pulse Brillouin optical time domain analysis (PSP-BOTDA) employing Dual Golay Codes

Bin Zan, M. S. D., Sasaki, T., Horiguchi, T. & Uchiyama, D., 2010 Oct 15, International Conference on Computer and Communication Engineering, ICCCE'10. 5556827. (International Conference on Computer and Communication Engineering, ICCCE'10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 Jan 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., Vol. 2014-January. 7017059

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 Aug 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, Vol. 2016-August. p. 570-579 10 p. 7529916

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, Vol. 529. p. 51-56 6 p. (Communications in Computer and Information Science; vol. 529).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)