College of Engineering and Design

Research Output

Filter
Conference contribution
Conference contribution

Daylight simulation in urban open space using radiance

Shinozaki, M., Kuwata, H. & Saito, K., 2000 Dec 1, Proceedings of the 8th International Conference on Computing in Civil and Building Engineering. p. 1542-1549 8 p. (Proceedings of the 8th International Conference on Computing in Civil and Building Engineering; vol. 279).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design and implementation of a visual feedback control system driven by wires

Shimada, A. & Gotoh, K., 2008 Dec 1, Proceedings of the 17th World Congress, International Federation of Automatic Control, IFAC. 1 PART 1 ed. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 17, no. 1 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Design and implementation of distributed sensor network for intelligent space based on robot technology components

Sasaki, T. & Hashimoto, H., 2009 Oct 20, Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09. p. 400-405 6 p. 5091013. (Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 Jan 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; vol. 1034).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design verification for product line development

Kishi, T., Noda, N. & Katayama, T., 2005 Dec 1, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). p. 150-161 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3714 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Development of Air Hockey Robot improving with the human players - Arm control for effective quick draw taking an opponent-s eye movement into account-

Ogawa, M., Shimizu, S., Kadogawa, T., Hashizume, T., Kudoh, S., Suehiro, T., Sato, Y. & Ikeuchi, K., 2011 Dec 1, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 3364-3369 6 p. 6119852. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of an active vision system with redundancy using parallel mechanism

Shimada, A. & Kusakari, A., 2007 Dec 1, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4279990. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 Oct 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of adjusted synthesized water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 373-381 9 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of deionized refined water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 365-372 8 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Improvement of electric rust preventive chip sedimentation system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 979-984 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of electric rust preventive machining method - Optimization of water recycle system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 973-978 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of fuzzy inference system with learning algorithm for determining press-forming conditions

Yoshihara, S., Takahashi, A., Saito, M., MacDonald, B. J. & Manabe, K., 2010 Dec 1, ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010. p. 561-566 6 p. (ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of micro wide angle fovea lens

Shimizu, S., Kiyohara, M. & Hashizume, T., 2012 Dec 1, Proceedings, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. p. 3796-3801 6 p. 6389286. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Development of Nonmechanical Zoom Lens System using Liquid Crystal

Hirai, H., Shimizu, S., Saito, T., Kurihara, H., Kawamura, M. & Sato, S., 2019 Oct, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, p. 5370-5375 6 p. 8927481. (IECON Proceedings (Industrial Electronics Conference); vol. 2019-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 May 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 Dec 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of wide angle fovea telescope

Shimizu, S., Hashizume, T. & Tanzawa, Y., 2014 Jan 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 552-556 5 p. 6823341. (International Workshop on Advanced Motion Control, AMC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 Dec 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-January. p. 8273-8278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 Jan 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (eds.). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; vol. 794).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct tilt angle control on inverted pendulum mobile robots

Shimizu, Y. & Shimada, A., 2010 Jun 25, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 234-239 6 p. 5463993. (International Workshop on Advanced Motion Control, AMC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Disaster back-up support using GIS contents composed of images from satellite and UAV

Shimizu, S., Suzuki, T., Ogawa, M., Fukazawa, Y., Shibayama, Y. & Hashizume, T., 2014 Mar 11, Field and Service Robotics - Results of the 8th International Conference. p. 81-96 16 p. (Springer Tracts in Advanced Robotics; vol. 92).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Draw bending of dissymmetric channel section with variable axial tension

Okude, Y., Sakaki, S. & Yoshihara, S., 2010 Dec 1, International Conference on Advances in Materials and Processing Technologies, AMPT2010. p. 347-352 6 p. (AIP Conference Proceedings; vol. 1315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Eccentricity compensator for log-polar sensor

Shimizu, S. & Burdick, J. W., 2007 Nov 27, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 4214-4219 6 p. 4209745. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Eccentricity estimator for wide-angle fovea sensor by FMI descriptor approach

Shimizu, S. & Burdick, J. W., 2009 Jan 1, 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008. IEEE Computer Society, p. 1377-1382 6 p. 4913201. (2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of axial force on corrosion behavior of SUS304 stainless steel bolt

Nakamura, Y., Yoshihara, S., MacDonald, B. J. & Galvin, E., 2014 Jan 1, THERMEC 2013 Supplement. Trans Tech Publications, p. 519-524 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of blank holder force with low frequency vibration technique in circular-cup deep-drawing using AZ31 magnesium alloy sheet

Horiike, N., Yoshihara, S., Tsuji, Y. & Okude, Y., 2012 Jan 1, Manufacturing Science and Technology. p. 2785-2789 5 p. (Advanced Materials Research; vol. 383-390).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of blank holder force with low frequency vibration technique in circular-cup deep-drawing using AZ31 magnesium alloy sheet

Horiike, N., Yoshihara, S., Tsuji, Y. & Okude, Y., 2012 Jan 26, Materials Science and Information Technology, MSIT2011. p. 666-670 5 p. (Advanced Materials Research; vol. 433-440).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of DLC coating on limiting drawing ratio of AZ31 magnesium alloy sheet

Tsuji, Y., Yoshihara, S., Tsuda, S., Iriyama, Y. & Nakano, Y., 2010 Jan 1, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 313-318 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of visual elements into the touch interaction during the drag operation

Yang, W. S., Yusuke, S. & Ahrary, A., 2014 Sep 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Enhancement of spatial memory using human-object relations

Niitsuma, M., Sasaki, T. & Hashimoto, H., 2008 Dec 1, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3509-3513 5 p. 4655271. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 Jun 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (eds.). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 Jan 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (eds.). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; vol. 1017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of machining accuracy by measurement of surface texture pattern

Tozawa, K., Toida, N., Kobayashi, Y. & Shirai, K., 2005 Dec 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power

Sawa, T., Ikuse, Y., Nishikawa, N., Odaki, T., Tomita, S., Yokota, T. & Yokouchi, M., 2012 Dec 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 27-30 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Extracting personal user context with a three-axis sensor mounted on a freely carried cell phone

Iso, T. & Yamazaki, K., 2006 Dec 1, SIGMAP 2006 - International Conference on Signal Processing and Multimedia Applications, Proceedings. p. 224-231 8 p. (SIGMAP 2006 - International Conference on Signal Processing and Multimedia Applications, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 Jan 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 Mar 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flight size auto tuning for broadband wireless networks

Igarashi, K. & Yamazaki, K., 2009 Nov 30, Proceedings of the 2009 ACM International Wireless Communications and Mobile Computing Conference, IWCMC 2009. p. 888-893 6 p. (Proceedings of the 2009 ACM International Wireless Communications and Mobile Computing Conference, IWCMC 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Formability of AZ31 magnesium alloy sheet in dry press forming using diamond-coated dies

Tsuda, S., Yoshihara, S. & Kataoka, S., 2010 Jan 1, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 15-20 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Gait analyzer based on a cell phone with a single three-axis accelerometer

Iso, T. & Yamazaki, K., 2006 Dec 1, MobileHCI 2006 - 8th International Conference on Human-Computer Interaction with Mobile Devices and Services. p. 141-144 4 p. (ACM International Conference Proceeding Series; vol. 159).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

75 Citations (Scopus)

Generation of multi-level disparity map from stereo wide angle fovea vision system

Kameyama, N., Tominaga, M., Kawasaki, N., Shimizu, S., Shimomura, O., Ishimaru, K., Murakami, R., Akamine, Y. & Mita, S., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5451-5456 6 p. 8591128. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Handwritten Cube Recognition and Evaluation Based on Perspectives for Sketch Training System

Kuribayashi, Y., Yamaga, E. & Sasaki, T., 2019 Apr 25, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 34-39 6 p. 8700369. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hierarchical framework for implementation of intelligent space

Sasaki, T. & Hashimoto, H., 2007 Dec 1, Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON. p. 28-33 6 p. 4460179. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E., 2011, High Speed Machining. p. 578-583 6 p. (Advanced Materials Research; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

High-speed motion control of wheeled inverted pendulum robots

Shimada, A. & Hatakeyama, N., 2007 Dec 1, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4280028. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

High speed movement control making use of zero dynamics on inverted pendulums

Shimada, A. & Hatakeyama, N., 2006 Dec 1, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. p. 4043-4048 6 p. 4153350. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)