Research Output

Filter
Conference contribution
2020

Announcement Capture System in Real Environments Using Recurrent Neural Network

Nakazawa, S. & Sasaki, T., 2020 Jan, Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, SII 2020. Institute of Electrical and Electronics Engineers Inc., p. 1046-1051 6 p. 9025855. (Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, SII 2020).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

A Prioritization Method for SPL Pairwise Testing Based on User Profiles

Akimoto, H., Isogami, Y., Kitamura, T., Noda, N. & Kishi, T., 2019 Dec, Proceedings - 2019 26th Asia-Pacific Software Engineering Conference, APSEC 2019. IEEE Computer Society, p. 118-125 8 p. 8945722. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 2019-December).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Collaborative robots system in a photography service using Kukanchi

Nakai, T., Nakamura, Y., Sasaki, T. & Matsuhira, N., 2019 Jan 24, 2018 IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO 2018. IEEE Computer Society, p. 111-116 6 p. 8625761. (Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO; vol. 2018-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 Jan 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; vol. 1034).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Nonmechanical Zoom Lens System using Liquid Crystal

Hirai, H., Shimizu, S., Saito, T., Kurihara, H., Kawamura, M. & Sato, S., 2019 Oct, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, p. 5370-5375 6 p. 8927481. (IECON Proceedings (Industrial Electronics Conference); vol. 2019-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 May 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 Jan 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (eds.). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; vol. 794).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Handwritten Cube Recognition and Evaluation Based on Perspectives for Sketch Training System

Kuribayashi, Y., Yamaga, E. & Sasaki, T., 2019 Apr 25, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 34-39 6 p. 8700369. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

The influence of the mechanism of the acoustic sound amplifier on sound transmission

Sato, K. & Yang, W., 2019 Jan 1, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2018 International Conference on Affective and Pleasurable Design, 2018. Fukuda, S. (ed.). Springer Verlag, p. 259-268 10 p. (Advances in Intelligent Systems and Computing; vol. 774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Usability and design guideline for designing single handle faucet’s and handle shape

Takagi, R., Hashida, N. & Takeuchi, H., 2019 Jan 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (eds.). Springer Verlag, p. 89-98 10 p. (Advances in Intelligent Systems and Computing; vol. 794).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Analysis of information provision methods for indoor navigation using interactive floor projection

Suyama, M., Hayashi, F. & Sasaki, T., 2018 Feb 1, SII 2017 - 2017 IEEE/SICE International Symposium on System Integration. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 1010-1015 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An Attitude Control Considering Sideslip Phenomenon Using DOB-Based LMPC-LQR for Four-Wheel Steering Vehicle

Soubou, H., Ohhira, T. & Shimada, A., 2018 Oct 15, 2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018. Institute of Electrical and Electronics Engineers Inc., p. 1544-1550 7 p. 8492534

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, Vol. 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; vol. 609).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 Dec 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 Mar 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Generation of multi-level disparity map from stereo wide angle fovea vision system

Kameyama, N., Tominaga, M., Kawasaki, N., Shimizu, S., Shimomura, O., Ishimaru, K., Murakami, R., Akamine, Y. & Mita, S., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5451-5456 6 p. 8591128. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Non-verbal communication-based emotion incitation robot

Shimizu, S., Shimada, K. & Murakami, R., 2018 Jun 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 338-341 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Potentials of Galilean and Keplerian Liquid Crystal Zoom Lens System

Shimizu, S., Hirai, H., Kawamura, M. & Sato, S., 2018 Oct 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 308-311 4 p. 8495813

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Research for relief of discomfort of sound user interface (sui)

Yang, W., 2018 Jan 1, 15th International Design Conference, DESIGN 2018. Storga, M., Pavkovic, N., Bojcetic, N., Skec, S. & Marjanovic, D. (eds.). Faculty of Mechanical Engineering and Naval Architecture, Vol. 3. p. 1489-1498 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on user-centered information design in SVOD service

Yang, W., Yahiro, S. & Sato, K., 2018 Jan 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 129-135 7 p. (Communications in Computer and Information Science; vol. 850).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robust Localization and Position Control for Mobile Robot Using EKF with Disturbance Estimation

Shimada, A., 2018 Oct 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 312-315 4 p. 8495723

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Saliency map for wide angle fovea vision sensor

Murakami, R., Shimizu, S., Hasebe, N. & Yamazaki, T., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5481-5486 6 p. 8591050. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on UI of charger in EV charging station

Yang, W., Hirohashi, T. & Choi, Y., 2018 Jan 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 410-417 8 p. (Communications in Computer and Information Science; vol. 852).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 Oct 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-September. p. 1229-1232 4 p. 8502661

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Warm bulge forming of small diameter A1100 aluminum tube

Mitsui, S., Miyagawa, T., Yasui, H. & Yoshihara, S., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 149-154 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2017

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 Dec 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-January. p. 8273-8278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of microstructural evolution processed by ECAP on corrosion behavior of pure magnesium in RPMI-1640 medium

Hosaka, T., Amanina, I., Saruwatari, N., Yoshihara, S. & MacDonald, B. J., 2017 Jan 1, BIODEVICES 2017 - 10th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 10th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2017. Peixoto, N., Fred, A., Gamboa, H. & Vaz, M. (eds.). SciTePress, p. 118-125 8 p. (BIODEVICES 2017 - 10th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 10th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2017; vol. 2017-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 Jan 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (eds.). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, Vol. 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; vol. 483).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A collaborative task experiment by multiple robots in a human environment using the Kukanchi system

Fujimoto, K., Sasaki, T., Sugaya, M., Yoshimi, T., Mizukawa, M. & Matsuhira, N., 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, Vol. 9835. p. 276-282 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9835).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 Jun 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 Aug 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, Vol. 2016-August. p. 570-579 10 p. 7529916

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 Jul 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (eds.). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 0).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 Jan 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

A path motion planning for humanoid climbing robot

Nguyen, D. & Shimada, A., 2015 Jan 8, Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013. Al-Begain, K., Al-Begain, K., Al-Dabass, D., Al-Dabass, D., Orsoni, A., Orsoni, A., Cant, R., Cant, R. & Zobel, R. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 179-184 6 p. 7004939. (Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (eds.). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, Vol. 529. p. 51-56 6 p. (Communications in Computer and Information Science; vol. 529).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 Jan 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., Vol. 2014-January. 7017059

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 09002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 08002. (MATEC Web of Conferences; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Altitude control using limited pole placement on coaxial-helicopter

Sugawara, Y. & Shimada, A., 2014 Jan 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 506-511 6 p. 6823333. (International Workshop on Advanced Motion Control, AMC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A path-planning algorithm for humanoid climbing robot using Kinect sensor

Dung, N. A. & Shimada, A., 2014 Oct 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1549-1554 6 p. 6935284. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Corrosion behavior of engineering materials in flow field

Soya, Y., Yoshihara, S., Ohmura, Y., MacDonald, B. J. & Galvin, E., 2014 Jan 1, THERMEC 2013 Supplement. Trans Tech Publications, p. 722-727 6 p. (Advanced Materials Research; vol. 922).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of wide angle fovea telescope

Shimizu, S., Hashizume, T. & Tanzawa, Y., 2014 Jan 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 552-556 5 p. 6823341. (International Workshop on Advanced Motion Control, AMC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution