Research Output 1997 2019

Filter
Article
2019
1 Citation (Scopus)

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 Sep 15, In : Biochemical Engineering Journal. 149, 107239.

Research output: Contribution to journalArticle

Scaffolds (biology)
Tissue engineering
Scaffolds
Fabrication
Tissue
1 Citation (Scopus)

Microstructure of plasma nitrided AISI420 martensitic stainless steel at 673 K

Aizawa, T., Yoshino, T., Morikawa, K. & Yoshihara, S., 2019 Feb 1, In : Crystals. 9, 2, 60.

Research output: Contribution to journalArticle

Open Access
martensitic stainless steels
Martensitic stainless steel
Plasmas
microstructure
Microstructure
Open Access
Milling (machining)
Machining
Wear of materials
Milling machines
Surface roughness
2018
2 Citations (Scopus)

A DLC-punch array to fabricate the micro-textured aluminum sheet for boiling heat transfer control

Aizawa, T., Wasa, K. & Tamagaki, H., 2018 Mar 25, In : Micromachines. 9, 4, 147.

Research output: Contribution to journalArticle

Aluminum sheet
Boiling liquids
Diamonds
Heat transfer
Carbon
1 Citation (Scopus)

Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing

Aizawa, T., Tamagaki, H. & Wasa, K., 2018 Jun 1, In : Journal of Micro and Nano-Manufacturing. 6, 2, 021007.

Research output: Contribution to journalArticle

Diamond
Printing
Diamonds
Nozzles
Computer aided design
1 Citation (Scopus)
Model predictive control
Kalman filters
Predictive control systems
Control systems
Friction
2017

A study of dry drilling method on chromium molybdenum steel

Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I., 2017, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.

Research output: Contribution to journalArticle

Molybdenum
Chromium
Drilling
Steel
Wear of materials

A study on the life-cycle costs of maintaining office building elevators

Nakamura, H. & Shinozaki, M., 2017 Jun 1, In : AIJ Journal of Technology and Design. 23, 54, p. 691-696 6 p.

Research output: Contribution to journalArticle

Elevators
Office buildings
Life cycle
Costs
Lubricating greases
2 Citations (Scopus)
Attitude control
Poles
Aircraft
Actuators
Backstepping
3 Citations (Scopus)
World Heritage Site
pedestrian
heat
Malaysia
scenario

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 Jan 1, In : Procedia Engineering. 207, p. 1027-1032 6 p.

Research output: Contribution to journalArticle

Piercing
Steel sheet
Plasmas
Nitriding
Shearing
3 Citations (Scopus)

Low temperature plasma nitriding of inner surfaces in stainless steel mini-/micro-pipes and nozzles

Aizawa, T. & Wasa, K., 2017, In : Micromachines. 8, 5, 157.

Research output: Contribution to journalArticle

Nitriding
Nozzles
Stainless steel
Pipe
Plasmas
1 Citation (Scopus)

Model Predictive Control for an Inverted-pendulum Robot with Time-varying Constraints

Ohhira, T. & Shimada, A., 2017 Jul 1, In : IFAC-PapersOnLine. 50, 1, p. 776-781 6 p.

Research output: Contribution to journalArticle

Model predictive control
Pendulums
Robots
Controllers
Wheels

On multisummability of formal solutions with logarithm terms for some linear partial differential equations

Yamazawa, H., 2017 Jan 1, In : Funkcialaj Ekvacioj. 60, 3, p. 371-406 36 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Phase transformation induced by high nitrogen content solid solution in the martensitic stainless steels

Farghali, A. & Aizawa, T., 2017, In : Materials Transactions. 58, 4, p. 697-700 4 p.

Research output: Contribution to journalArticle

martensitic stainless steels
Martensitic stainless steel
phase transformations
Energy dispersive spectroscopy
Solid solutions
2 Citations (Scopus)

Plasma Polishing and Finishing of CVD-Diamond Coated WC (Co) Dies for Dry Stamping

Yunata, E. E., Aizawa, T., Tamaoki, K. & Kasugi, M., 2017 Jan 1, In : Procedia Engineering. 207, p. 2197-2202 6 p.

Research output: Contribution to journalArticle

Stamping
Polishing
Chemical vapor deposition
Diamonds
Diamond films
Grinding wheels
Vibrations (mechanical)
Automation
Acoustic waves
Microphones

松下幸之助のデザイン観と真野善一の苦悩

Translated title of the contribution: Matsushita Konosuke's design view and Zenichi Mano's anguishMasunari, K., 2017 Mar 15, In : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

Research output: Contribution to journalArticle

Mano
Anguish
Person
Raymond Loewy
Managers
2016
4 Citations (Scopus)

Holomorphic and singular solutions of q-difference-differential equations of briot-bouquet type

Yamazawa, H., 2016, In : Funkcialaj Ekvacioj. 59, 2, p. 185-197 13 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Aizawa, T., Fukuda, T. & Morita, H., 2016, In : Manufacturing Review. 3, 2016004.

Research output: Contribution to journalArticle

Plasma density
Stamping
Nitriding
Molds
Stainless steel
5 Citations (Scopus)

Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2016 Apr 1, In : Manufacturing Letters. 8, p. 16-20 5 p.

Research output: Contribution to journalArticle

Plasma etching
Diamond films
Chemical vapor deposition
Diamonds
Cathodes
6 Citations (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 Aug 30, In : Biofabrication. 8, 3, 035016.

Research output: Contribution to journalArticle

Scaffolds (biology)
Liver
Tissue
Fabrication
Scaffolds
2 Citations (Scopus)

Pulsewise-motion controlled stamping for microtexturing Onto Aluminum sheet

Aizawa, T. & Fukuda, T., 2016 Mar 1, In : Journal of Micro and Nano-Manufacturing. 4, 1, 014502.

Research output: Contribution to journalArticle

Aluminum sheet
Stamping
Microcavities
Plasma etching
Carbon films
Mechatronics
Industry
Aluminum alloys
Diamonds
Friction
Carbon
Aluminum

日本における電子レンジのデザイン変遷: 新聞記事と広告調査からみえる普及過程

Translated title of the contribution: Transition of Microwave Oven Design in Japan: Diffusion process of a microwave oven according to newspaper articles and advertising researchMasunari, K., 2016 Nov 10, In : Design Research. 72, p. 64-65 2 p.

Research output: Contribution to journalArticle

2015
1 Citation (Scopus)

Attitude control of quadrotor in consideration of the effects of a pole based on limited pole placement

Sugawara, Y. & Shimada, A., 2015 Aug 1, In : IEEJ Transactions on Industry Applications. 135, 8, p. 827-835 9 p.

Research output: Contribution to journalArticle

Attitude control
Poles
Aircraft
Actuators
Backstepping

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 May 1, In : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

Research output: Contribution to journalArticle

Airships
Robots
Intelligent robots
Mobile robots
Image processing
2 Citations (Scopus)

Micro-texturing into DLC/diamond coated molds and dies via high density oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2015, In : Manufacturing Review. 2, 2015015.

Research output: Contribution to journalArticle

Plasma etching
Texturing
Molds
Diamonds
Etching
5 Citations (Scopus)

Parametric borel summability for some semilinear system of partial differential equations

Yamazawa, H. & Yoshino, M., 2015, In : Opuscula Mathematica. 35, 5, p. 825-845 21 p.

Research output: Contribution to journalArticle

Performance of diamond-like carbon coated tool in dry cutting of aluminum alioys

Yokota, T., Sawa, T. & Yokouchi, M., 2015 Jun 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 6, p. 604-609 6 p.

Research output: Contribution to journalArticle

Diamonds
Aluminum
Carbon
Aluminum alloys
Aluminum castings
5 Citations (Scopus)

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels ∗

Katoh, T., Aizawa, T. & Yamaguchi, T., 2015, In : Manufacturing Review. 2, 2015004.

Research output: Contribution to journalArticle

Martensitic stainless steel
Texturing
Nitriding
Plasmas
Injection molding
7 Citations (Scopus)

Q-analogue of summability of formal solutions of some linear q-difference-differential equations

Tahara, H. & Yamazawa, H., 2015, In : Opuscula Mathematica. 35, 5, p. 713-738 26 p.

Research output: Contribution to journalArticle

テレビ受像機の草創期における製品形態の変容: テーブルタイプから誕生したポータブルタイプ

Translated title of the contribution: Transformation of product form in the early days of television set: The birth of the portable type TV set from the table type TV setMasunari, K., 2015 Nov 1, In : Design Research. 69, p. 18-19 2 p.

Research output: Contribution to journalArticle

Car
2014
4 Citations (Scopus)

Complete ashing of used DLC coating for reuse of the end-milling tools

Aizawa, T., Masaki, E. & Sugita, Y., 2014 Jan, In : Manufacturing Letters. 2, 1, p. 1-3 3 p.

Research output: Contribution to journalArticle

Diamonds
Coatings
Carbon
Diamond like carbon films
Milling (machining)

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, In : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

Research output: Contribution to journalArticle

Assays
Bacteria
Machining
Fluids
Water
11 Citations (Scopus)

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 Apr, In : Precision Engineering. 38, 2, p. 365-370 6 p.

Research output: Contribution to journalArticle

Aluminum alloys
Diamonds
Machining
Amorphous carbon
Carbon
5 Citations (Scopus)

Tribo-characterization of silicon doped and nano-structured DLC coatings by metal forming simulators

Dohda, K. & Aizawa, T., 2014, In : Manufacturing Letters. 2, 3, p. 82-85 4 p.

Research output: Contribution to journalArticle

Metal forming
Diamonds
Simulators
Silicon
Coatings

Variability modeling methods for software product line development

Noda, N. & Kishi, T., 2014 Dec 14, In : Computer Software. 31, 4, p. 66-76 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Wind-disturbance-based control approach for blimp robots

Furukawa, H. & Shimada, A., 2014 Feb, In : Electronics and Communications in Japan. 97, 2, p. 549-555 7 p.

Research output: Contribution to journalArticle

Airships
approach control
robots
disturbances
Robots
2013
Mechatronics
Innovation
Chemical activation

Computing level of privacy in a virtual environment

Indraprastha, A. & Shinozaki, M., 2013 Mar 1, In : International Journal of Architectural Computing. 11, 1, p. 65-86 22 p.

Research output: Contribution to journalArticle

Virtual reality
6 Citations (Scopus)

Continuous dry cylindrical and rectangular deep drawing by electroconductive ceramic dies

Tamaoki, K., Manabe, K. I., Kataoka, S. & Aizawa, T., 2013 Jun, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 135, 3, 031008.

Research output: Contribution to journalArticle

Ceramic dies
Deep drawing
Ceramic tools
Surface roughness
Electric discharges

Effect of alcohol aqueous solution mist in turning of aluminum alloy using DLC coated tool

Yokota, T., Sawa, T., Yokouchi, M. & Morita, N., 2013 Jan, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 79, 1, p. 81-86 6 p.

Research output: Contribution to journalArticle

Fog
Aluminum alloys
Alcohols
Cooling
Adhesion
5 Citations (Scopus)

Modelling and simulation of robotic systems using sysml

Rahman, M. A. A., Mizukawa, M., Phaoharuhansa, D. & Shimada, A., 2013, In : International Journal of Modelling and Simulation. 33, 3, p. 152-161 10 p.

Research output: Contribution to journalArticle

Robotics
Specifications
Systems analysis
Engineers
Conceptual design
27 Citations (Scopus)

Multisummability of formal solutions to the Cauchy problem for some linear partial differential equations

Tahara, H. & Yamazawa, H., 2013 Nov 15, In : Journal of Differential Equations. 255, 10, p. 3592-3637 46 p.

Research output: Contribution to journalArticle

Partial differential equations
13 Citations (Scopus)

Oxygen plasma etching of diamond-like carbon coated mold-die for micro-texturing

Aizawa, T. & Fukuda, T., 2013 Jan 25, In : Surface and Coatings Technology. 215, p. 364-368 5 p.

Research output: Contribution to journalArticle

Diamond
Plasma etching
Texturing
oxygen plasma
plasma etching

Remarks on formal solution and genuine solutions for some nonlinear partial differential equations

Yamazawa, H., 2013 Jun, In : Tokyo Journal of Mathematics. 36, 1, p. 131-145 15 p.

Research output: Contribution to journalArticle

Synthesis and characterization of doped and undoped nano-columnar DLC coating

Hoe, F. J., Aizawa, T. & Yukawa, S., 2013 May, In : Jurnal Teknologi (Sciences and Engineering). 62, 1, p. 17-24 8 p.

Research output: Contribution to journalArticle

Diamonds
Amorphous carbon
Coatings
Carbon
Diamond like carbon films
1 Citation (Scopus)

Verification in Software Product Line Development.

Noda, N. & Kishi, T., 2013, In : Computer Software. 30, 3, p. 3-17 15 p.

Research output: Contribution to journalArticle

Formal methods
Software engineering
Testing
Costs