Department of Mechanical Engineering

Research Output

2019

Analysis of the behaviour of charged particles in electrical relay devices

Iida, M., Koshimura, K., Kaneko, M. & Saeki, M., 2019 Oct 16, In : Journal of Physics: Conference Series. 1322, 1, 012007.

Research output: Contribution to journalConference article

Open Access
Open Access

Development of Tele-operation Support System for Remote Construction with Large Time Delay

Fujiwara, K., Kobayashi, K. & Uchimura, Y., 2019 Sep, 2019 58th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2019. Institute of Electrical and Electronics Engineers Inc., p. 1728-1733 6 p. 8859848. (2019 58th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Efficiency of vibrational energy dissipation by tuned rolling-cylinder dampers

Tsuda, R. & Saeki, M., 2019 Dec 22, In : Journal of Sound and Vibration. 463, 114977.

Research output: Contribution to journalArticle

Evaluation of viscoelastic-viscoplastic characteristics and finite element analyses for thermoplastics

Takaoka, H. & Sakaue, K., 2019 Jan 1, (Accepted/In press) In : Advanced Composite Materials.

Research output: Contribution to journalArticle

Experimental investigation on the electrokinetic motions of colloidal particles at an interfacial boundary between solid and liquid

Shirai, K., Kaji, S., Hosokawa, S., Kawanami, T. & Hirasawa, S., 2019 Jan 1, Fluid Measurement and Instrumentation; Micro and Nano Fluid Dynamics. American Society of Mechanical Engineers (ASME), (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of aluminum foam with complex shapes using pin screen mold and effect of arrangement of pins on its surface morphology

Hangai, Y., Takahashi, K., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2019 Jan 1, (Accepted/In press) In : Journal of Porous Materials.

Research output: Contribution to journalArticle

Foaming behavior of blowing- and stabilization-agent-free aluminum foam precursor during spot friction stir welding

Hangai, Y., Takada, K., Fujii, H., Aoki, Y. & Utsunomiya, T., 2019 Mar 1, In : Journal of Materials Processing Technology. 265, p. 185-190 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
1 Citation (Scopus)

Optical characteristics of human skin with hyperpigmentation caused by fluorinated pyrimidine anticancer agent

Kono, T., Imanishi, N., Nozawa, K., Takashima, A., Umamaheswari, R., Gonome, H. & Yamada, J., 2019 Aug 1, In : Biomedical Optics Express. 10, 8, p. 3747-3759 13 p., 366571.

Research output: Contribution to journalArticle

Performance prediction of zero head turbine at different water levels

Masud, I. A., Yusuke, S. & Suwa, Y., 2019 Jan 1, In : IOP Conference Series: Earth and Environmental Science. 291, 1, 012048.

Research output: Contribution to journalConference article

Open Access

Press forming of aluminum foam during foaming of precursor

Hangai, Y., Ohashi, M., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2019 Jan 1, In : Materials Transactions. 60, 11, p. 2464-2469 6 p.

Research output: Contribution to journalArticle

Radiative properties of scattering media containing directionally controlled nanofibers

Gonome, H., Arai, Y., Fujiwara, K., Kono, T., Nakamura, K. & Yamada, J., 2019 Oct, In : Journal of Quantitative Spectroscopy and Radiative Transfer. 236, 106580.

Research output: Contribution to journalArticle

Refoaming of deformed aluminum foam by precursor foaming process

Hangai, Y., Matsushita, H., Suzuki, R., Koyama, S., Amagai, K., Nagahiro, R., Utsunomiya, T., Matsubara, M. & Yoshikawa, N., 2019 Jan 1, (Accepted/In press) In : Journal of Porous Materials.

Research output: Contribution to journalArticle

Route optimization of construction machine by deep reinforcement learning

Tanabe, S., Sun, Z., Nakatani, M. & Uchimura, Y., 2019 Jan 1, In : IEEJ Transactions on Industry Applications. 139, 4, p. 401-408 8 p.

Research output: Contribution to journalArticle

Shaping of aluminum foam during foaming of precursor using steel mesh with various opening ratios

Hangai, Y., Nagahiro, R., Ohashi, M., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2019 Feb 1, In : Metals. 9, 2, 223.

Research output: Contribution to journalArticle

Open Access

Viscoelastic characteristics of short fiber reinforced polybutylene terephthalate

Sakaue, K., Ochiai, M., Endo, S. & Takaoka, H., 2019 Jan 1, (Accepted/In press) In : Mechanics of Time-Dependent Materials.

Research output: Contribution to journalArticle

2018

Autonomous grading work using deep reinforcement learning based control

Nakatani, M., Sun, Z. & Uchimura, Y., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5068-5073 6 p. 8591189. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact prediction control for a teleoperation system with time delay

Norizuki, H. & Uchimura, Y., 2018 Jan 1, In : IEEJ Journal of Industry Applications. 7, 1, p. 102-108 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design of model predictive control considering time delay in remote excavation work

Norizuki, H. & Uchimura, Y., 2018 Jun 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 587-592 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of Al foam with harmonic structure by Cu addition using sintering and dissolution process

Hangai, Y., Morita, T. & Utsunomiya, T., 2018 Nov 1, In : Materials Letters. 230, p. 120-122 3 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Fabrication of aluminum foam core sandwich using sandwich-type foamable precursor with two face sheets by friction stir welding route

Utsunomiya, T., Otsuki, K. & Hangai, Y., 2018 Jan 1, In : Materials Transactions. 59, 6, p. 999-1004 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion

Hangai, Y., Otazawa, S., Utsunomiya, T., Suzuki, R., Koyama, S., Matsubara, M. & Yoshikawa, N., 2018 Jun 1, In : Materials Today Communications. 15, p. 36-42 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Foaming of aluminum foam precursor during friction stir welding

Hangai, Y., Takada, K., Endo, R., Fujii, H., Aoki, Y. & Utsunomiya, T., 2018 Sep 1, In : Journal of Materials Processing Technology. 259, p. 109-115 7 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Forming of aluminum foam using light-transmitting material as die during foaming by optical heating

Hangai, Y., Amagai, K., Tsurumi, N., Omachi, K., Shimizu, K., Akimoto, K., Utsunomiya, T. & Yoshikawa, N., 2018 Jan 1, In : Materials Transactions. 59, 11, p. 1854-1859 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Forming of aluminum foam using steel mesh as die during foaming of precursor by optical heating

Hangai, Y., Amagai, K., Omachi, K., Tsurumi, N., Utsunomiya, T. & Yoshikawa, N., 2018 Dec 1, In : Optics and Laser Technology. 108, p. 496-501 6 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

High fidelity simulation of low velocity impact behavior of CFRP laminate

Ebina, M., Yoshimura, A., Sakaue, K. & Waas, A. M., 2018 Oct 1, In : Composites Part A: Applied Science and Manufacturing. 113, p. 166-179 14 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Large-scale simulation for particle damping

Saeki, M. & Bitoh, M., 2018 Jan 1, Seismic Engineering. American Society of Mechanical Engineers (ASME), Vol. 8.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low velocity impact simulation of CFRP laminates considering microscopic damage interaction

Ebina, M., Yoshimura, A., Aoki, Y. & Sakaue, K., 2018 Jan 1, 33rd Technical Conference of the American Society for Composites 2018. DEStech Publications Inc., Vol. 1. p. 12-28 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfluidic long-term gradient generator with axon separation prototyped by 185 nm diffused light photolithography of SU-8 photoresist

Futai, N., Tamura, M., Ogawa, T. & Tanaka, M., 2018 Dec 24, In : Micromachines. 10, 1, 9.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Model based predictive control for a system with long time delay

Kobayashi, K. & Uchimura, Y., 2018 Jun 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 581-586 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model based predictive control for tele-operational control system with time delay

Kobayshi, K. & Uchimura, Y., 2018 Jan 1, In : IEEJ Transactions on Industry Applications. 138, 4, p. 323-329 7 p.

Research output: Contribution to journalArticle

Multicycle Indentation for Evaluation of Polymer Material Viscoelastic Characteristics

Kato, K., Kishibe, S., Sakaue, K. & Yoshimoto, T., 2018 Feb 15, (Accepted/In press) In : Experimental Mechanics. p. 1-8 8 p.

Research output: Contribution to journalArticle

Network-Based Control with State Prediction for Time-Delayed System

Kobayashi, K., Minohara, A. & Uchimura, Y., 2018 Aug 10, Proceedings - 2018 IEEE 27th International Symposium on Industrial Electronics, ISIE 2018. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-June. p. 982-987 6 p. 8433830

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Optimal routing control of a construction machine by deep reinforcement learning

Sun, Z., Nakatani, M. & Uchimura, Y., 2018 Jun 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 187-192 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization method for developing spectral controlling cosmetics: Application for thermal barrier cosmetic

Gonome, H. & Yamada, J., 2018 Aug 1, In : Coatings. 8, 8, 286.

Research output: Contribution to journalArticle

Reconfigurable microfluidic channel with pin-discretized sidewalls

Futai, N., Fujita, K. & Ikuta, W., 2018 Apr 13, In : Journal of Visualized Experiments. 2018, 134, e57230.

Research output: Contribution to journalArticle

Shaping of aluminum foam using point group mold

Hangai, Y., Takahashi, K., Nagahiro, R., Amagai, K. & Utsunomiya, T., 2018 Jan 1, In : Materials Transactions. 59, 12, p. 1952-1955 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Viability of hydro-kinetic turbine as an alternative for renewable energy harvesting in Nigeria

Masud, I. A. & Suwa, Y., 2018 Mar 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788852. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

金網金型による発泡アルミニウム発泡時の形状付与

Translated title of the contribution: Shaping of aluminum foam during foaming process using stainless steel mesh moldHangai, Y., Tsurumi, N., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2018 Jan 1, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 82, 12, p. 484-486 3 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2017

Aluminum alloy foam-filled aluminum tube fabricated by friction stir back extrusion and its compression properties

Hangai, Y., Otazawa, S. & Utsunomiya, T., 2017 Jan 27, (Accepted/In press) In : Composite Structures.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Contact prediction control for a teleoperation system with time delay

Norizuki, H. & Uchimura, Y., 2017, In : IEEJ Transactions on Industry Applications. 137, 7, p. 561-567 7 p.

Research output: Contribution to journalArticle

Contact prediction control for a tele-operation system with time delay

Norizuki, H. & Uchimura, Y., 2017 May 6, Proceedings - 2017 IEEE International Conference on Mechatronics, ICM 2017. Institute of Electrical and Electronics Engineers Inc., p. 68-73 6 p. 7921082

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Control system design considering packet loss and variable time delay in a network-based system

Suhara, T., Norizuki, H. & Uchimura, Y., 2017, In : IEEJ Transactions on Industry Applications. 137, 2, p. 87-94 8 p.

Research output: Contribution to journalArticle

Development of electrostatic separator of foreign objects in dried foods

Suzuki, M., Iwase, S., Koike, Y. & Saeki, M., 2017 Mar 1, In : Japan Journal of Food Engineering. 18, 1, p. 61-69 9 p.

Research output: Contribution to journalArticle

Dynamic compression properties of porous aluminum with functionally graded pore structures

Hangai, Y., Suto, S., Utsunomiya, T., Kawashima, H., Kuwazuru, O. & Yoshikawa, N., 2017 Jan 1, In : Keikinzoku/Journal of Japan Institute of Light Metals. 67, 11, p. 576-581 6 p.

Research output: Contribution to journalArticle

Evaluation of viscoelastic characteristics of polymer by using indentation method

Sakaue, K., 2017, Mechanics of Composite and Multi-functional Materials - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 7. p. 303-307 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of aluminum sandwich panel with functionally graded foam consisting of dissimilar aluminum alloys

Hangai, Y., Suto, S. & Utsunomiya, T., 2017 Jan 1, In : Keikinzoku/Journal of Japan Institute of Light Metals. 67, 11, p. 595-596 2 p.

Research output: Contribution to journalShort survey