Graduate School of Engineering and Science

Research Output

Filter
Paper
2013

The GPS camera application for the efficiency improvement of the bridge inspection

Kamada, T., Katsuki, F. & Nakagawa, M., 2013 Jan 1.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

The impact of warm water in upstream on water quality of headwaters reservoir

Makino, I. & Yahagi, Y., 2013 Jan 1, p. 1001-1012. 12 p.

Research output: Contribution to conferencePaper

Ultra-wideband noise suppression of power supply noise by combining mushroom and planar type EBG structures

Ikemiya, K., Sakai, M. & Sudo, T., 2013 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Verification of visual attitude control for outdoor autonomous mobile robots

Iwata, S., Sahashi, S. & Hasegawa, T., 2013 Jan 1, p. 319-320. 2 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Wearable finger ring type antenna made of fabric cloth for BAN use at UHF and ISM bands

Horie, H. & Iwasaki, H., 2013 Jan 1.

Research output: Contribution to conferencePaper

3 Citations (Scopus)
2014

A study on warning activation timing of rear-end collision with driver model of neural network

Hirose, T., Kaneko, Y., Kasuga, N. & Sawada, T., 2014 Jan 1.

Research output: Contribution to conferencePaper

Detection and notification of dangerous obstacles and places for visually impaired persons using a smart cane

Niitsu, Y., Taniguchi, T. & Kawashima, K., 2014 Jan 1, p. 68-69. 2 p.

Research output: Contribution to conferencePaper

10 Citations (Scopus)

Reducing signal transmission loss by low surface roughness

Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 Jan 1.

Research output: Contribution to conferencePaper

Robust watermarking method by systematic block diffusion using discrete cosine transform

Ohzeki, K., Bannai, K., Wei, Y. Y., Hirakawa, Y. & Sato, K., 2014 Jan 1, p. 112-121. 10 p.

Research output: Contribution to conferencePaper

Signal transmission loss due to copper surface roughness in high-frequency region

Liew, E., Malaysia, M. C. F., Malaysia, S. A., Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 Jan 1.

Research output: Contribution to conferencePaper

4 Citations (Scopus)

The effect of a safety education web system on driving behaviour: A self-learning system using videos of driving recorders

Michisita, T., Ishizaki, H., Yasuda, T., Tokunaga, S., Toritsuka, T., Ukena, K. & Kasuga, N., 2014 Jan 1.

Research output: Contribution to conferencePaper

2015

GIS based for developing support application of concrete construction under the various environment

Ishida, H., Anno, S. & Iyoda, T., 2015 Jan 1.

Research output: Contribution to conferencePaper

2016

Corrosion behavior of flame-resistant Calcium-added Magnesium alloy in NaCl aqueous solution containing various anion species

Tsunakawa, M., Shiratori, R., Nakamura, K. & Ishizaki, T., 2016 Jan 1, p. 1559-1565. 7 p.

Research output: Contribution to conferencePaper

2017

An experimental result of influence of visual presentation method on subjective evaluation of moving boat noise

Muto, K., Hosono, S. & Tokunaga, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

A study on improvement level of speech quality with covering bone conduction microphone for MRI examination

Inagaki, M., Muto, K., Takahashi, K. & Yagi, K., 2017 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Efficiency improvement of sfm using image blocks for infrastructure inspection

Nakagawa, M., Miwa, K., Nozue, S., Sekiguchi, Y., Hirate, K., Noda, Y. & Miyo, M., 2017 Jan 1.

Research output: Contribution to conferencePaper

Flaking concrete detection with hammering inspection methodology based on machine learning

Saso, H., Katsuki, F. & Nakagawa, M., 2017 Jan 1.

Research output: Contribution to conferencePaper

Image feature-based SLAM for flat surface modeling in indoor environment

Kobayashi, T. & Nakagawa, M., 2017 Jan 1.

Research output: Contribution to conferencePaper

Influence of Ca-addition amount on corrosion behavior of Ca-added Mg alloys

Shimada, Y., Tsunakawa, M., Nakamura, K. & Ishizaki, T., 2017 Jan 1.

Research output: Contribution to conferencePaper

Preparation of corrosion resistant film on magnesium alloys with different aluminum contents by steam coating

Tsunakawa, M., Shimada, Y., Nakamura, K. & Ishizaki, T., 2017 Jan 1.

Research output: Contribution to conferencePaper

Representation of Ethnic Identity Thorough Spatial Conservation of the House and the Dwelling in Northern Thailand

Shimizu, I., Tansukanun, P. & Sooksawasdi, S., 2017 Jul 16, p. 1-24.

Research output: Contribution to conferencePaper

SPOKEN WORD RECOGNITION SYSTEM FOR UNLIMITED SPEAKERS.

Kido, K., Miwa, J., Makino, S. & Niitsu, Y., 2017 Jan 1, p. 735-738. 4 p.

Research output: Contribution to conferencePaper

STRAIN ANALYSES OF NONLINEAR CRACK BEHAVIOR AT ELEVATED TEMPERATURE BY FINITE ELEMENT METHOD AND MOIRE TOPOGRAPHICAL METHOD.

Aizawa, T., Yagawa, G. & Ando, Y., 2017 Jan 1.

Research output: Contribution to conferencePaper

2018

A study of field condition feedback to a remote controlled underwater heavy machine operator

Nozaki, Y., Yoshimi, T. & Fuchiyama, S., 2018 Jan 1.

Research output: Contribution to conferencePaper

Automatic tracking camera system for construction machines by combined image processing

Inoue, M. & Yoshimi, T., 2018 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Crack detection from high-resolution aerial triplet images for safer collapse investigations in high mountain areas

Nakagawa, M., Igusa, R., Usuki, N., Takigawa, M., Nishimura, N., Katsumata, Y. & Eguchi, T., 2018 Jan 1, p. 1269-1276. 8 p.

Research output: Contribution to conferencePaper

Efficiency improvement for multi-position of receiver in 13.56 MHz wireless power transfer coupling system

Cuong, N. T. & Akatsu, K., 2018 Jan 1.

Research output: Contribution to conferencePaper

Study of High-speed SRM with Amorphous steel sheet for EV

Tomioka, T., Aiso, K. & Akatsu, K., 2018 Jan 1.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
2019

Experimental study on the reinforced concrete pile-cap with a pile, exterior column and foundation beam

Kishida, S. & Mukai, T., 2019 Jan 1, p. 2229-2242. 14 p.

Research output: Contribution to conferencePaper

Shear capacity evaluation of unbonded precast prestressed concrete beam-column joints caused volume loss by sheath tubes

Tajima, Y. & Kishida, S., 2019 Jan 1, p. 2207-2216. 10 p.

Research output: Contribution to conferencePaper

2020

Dynamic indoor space reconstruction using temporal point clouds

Nozaki, R. & Nakagawa, M., 2020 Jan 1.

Research output: Contribution to conferencePaper

Filtering of bridge-slab bending effect in terrestrial laser scanning

Nakagawa, M., Sasaki, K., Matsuda, S. & Ito, H., 2020 Jan 1.

Research output: Contribution to conferencePaper

Performance evaluation of single frequency RTK-GNSS positioning for structure inspection using wearable sensors

Kurita, K., Takahashi, S. & Nakagawa, M., 2020 Jan 1.

Research output: Contribution to conferencePaper

Processing speed improvement on SFM using panoramic images based on camera direction constraints

Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020 Jan 1.

Research output: Contribution to conferencePaper

Rapid and efficient extraction of inert platinum group metals from HNO3(aq) at elevated temperature

Zheng, Z., Arai, T. & Takao, K., 2020 Jan 1, p. 999-1001. 3 p.

Research output: Contribution to conferencePaper

Real-time mapping of construction workers using multilayered LiDAr

Nakagawa, M., Kaseda, M. & Taguchi, M., 2020 Jan 1.

Research output: Contribution to conferencePaper