Graduate School of Engineering and Science

Research Output

Filter
Article
1800

Acoustic diagnosis for nondestructive evaluation of ceramic coatings on the steel substrates.

Aizawa, T., Ito, M. & Kihara, J., 1800, In : Composites for the Pressure Vessel Industry.. ASME PVP-302 (1995), p. 257-270

Research output: Contribution to journalArticle

Acoustic Spectro-Microscopy for Quantitative Nondestructive Evaluation of Ceramic Coated Materials.

Aizawa, T., 1800, In : Ceramic Transaction.. 89 (1998), p. 183-194

Research output: Contribution to journalArticle

Advanced plasma nitriding for aluminum and aluminum alloys.

Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In : Materials Transactions.. 44 [12] (2003), p. 2695-2700

Research output: Contribution to journalArticle

An Application of CAL to Robotics

Sato, S. & Aiba, A., 1800, In : ICOT Technical Memo.

Research output: Contribution to journalArticle

A novel process to form Al-12 mass% Si bulk materials from machined chips using bulk mechanical alloying.

Luangvaranunt, T., Kondoh, K. & Aizawa, T., 1800, In : Materials Transactions.. 43 [5] (2002), p. 1178-1182

Research output: Contribution to journalArticle

Average version of Artin's conjective in an algebraic number field

Shigeki, E. & Egami, S., 1800, In : Tokyo J. Math. 4, p. 203-212

Research output: Contribution to journalArticle

Barrier-free processing of materials for environmentally benign life-cycle design.

Mabuchi, M., Halada, K. & Aizawa, T., 1800, In : Materials Transaction.. 43 [3] (2002), p. 285-291

Research output: Contribution to journalArticle

Behavior of magnesium in Hank's solution aimed to trabecular pattern of natural bone.

Kuwahara, H., Mazaki, N., Mabuchi, M., Wein, C. & Aizawa, T., 1800, In : Materials Science Forum.. 419-422 (2003), p. 1007-1012

Research output: Contribution to journalArticle

CAL: A Constraint Logic Programming Language and Its Enhancement for Application to Handling Robots

Aiba, A., Sato, S., Terasaki, S., Sakata, M. & Machida, K., 1800, In : ICOT Technical Report.

Research output: Contribution to journalArticle

CAL: A Constraint Logic Programming Language and Its Enhancement for Application to Hondling Robots

A.Aiba, A. A., S.Sato, S. S., S.Terasaki, S. T., M.Sakata, M. S., K.Machida, K. M. & Aiba, A., 1800, In : ICOT Technical Report. p. 0729

Research output: Contribution to journalArticle

Characterization of cementite films prepared by electron-shower-assisted PVD method.

S.J.Li, S. J. L., Ishihara, M., Yumoto, H., Aizawa, T. & Shimotomai, M., 1800, In : Thin Solid Films.. 316 (1998), p. 100-104

Research output: Contribution to journalArticle

Characterization of hydrogen storage alloy Mg2Co synthesized by bulk mechanical alloying.

Wang, Y. J., Aizawa, T. & Nishimura, C., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 343-346

Research output: Contribution to journalArticle

Chemical modification of titanium nitride films via ion implantation.

Aizawa, T., A.Mitsuo, A. M. & Akhadejdamrong, T., 1800, In : Materials Transactions.. 44 [10] (2003), p. 1962-1970

Research output: Contribution to journalArticle

Compositional dependent amorphization in Zr alloy films by means of Ni-implantation.

Muraishi, S., Naito, H. & Aizawa, T., 1800, In : Materials Transactions.. 46 (12) (2005), p. 2751-2754

Research output: Contribution to journalArticle

Compressive deformation simulation of regularly cell-structured materials with various column connectivity.

Tantikom, K. & Aizawa, T., 1800, In : Materials Transactions.. 46 [6] (2005), p. 1154-1160

Research output: Contribution to journalArticle

Computational study of compressive mechanical response in two-dimensional cellular solids under microstructural control.

Suwa, Y., Mukai, T. & Aizawa, T., 1800, In : Materials Transactions.. 46 [6] (2005), p. 1221-1229

Research output: Contribution to journalArticle

Computing Soft Constraints by Hierarchical Constraint Logic Programming

Satoh, K. & Aiba, A., 1800, In : ICOT Technical Report.

Research output: Contribution to journalArticle

Controlled elasticity in nano-structured metallic glass by ion implantation method..

Muraishi, S., Naito, H., Shi, J., Y, Y., Nakamura, N. & Aizawa, T., 1800, In : Mater. Sci. Forum. 561-565 (2007), p. 1315-1318

Research output: Contribution to journalArticle

Controlled fracture forming of metal/alpha-alumina composite wires.

Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Default journal. 42 (1995), p. 655-660

Research output: Contribution to journalArticle

Coupled, macro-micro modeling for hot deformation and sintering.

Aizawa, T., Prawato, Y. & Tsumori, F., 1800, In : J. Computational and Applied Mathematics.. 149 (2002), p. 307-324

Research output: Contribution to journalArticle

Coupled multilevel modeling for hot deformation and sintering.

Aizawa, T. & Tsumori, F., 1800, In : Key Engineering Materials.. 180 (2000), p. 661-666

Research output: Contribution to journalArticle

Critical issues in promotion of environmentally benign manufacturing and materials processing.

Aizawa, T., Halada, K. & Gutowski, T. G., 1800, In : Materials Transactions.. 43 [3] (2002), p. 390-396

Research output: Contribution to journalArticle

Crystallographic anisotropy control of n-type Bi-Te-Se thermoelectric material via bulk mechanical alloying and shear extrusion.

Kim, S. S. & Aizawa, T., 1800, In : Materials Transaction.. 45 [3] (2004), p. 918-924

Research output: Contribution to journalArticle

Densification and Resintering Behavior of Alumina Compacts Processed by Controlled Fracture Forming.

W.B, W. B., Du, D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Default journal. 45 (1998), p. 145-151

Research output: Contribution to journalArticle

Dry small hole shearing of cold rolled steel sheet with electroconductive ceramic tools

Tamaoki, K., Aizawa, T., Manabe, M. & Kataoka, S., 1800, In : J. Steel Research International. 46, p. 825-828

Research output: Contribution to journalArticle

Dynamic deformation of regularly cell-structured materials.

Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 1800, In : Materials Science Forum.. 465-466 (2004), p. 13-22

Research output: Contribution to journalArticle

Effect of cell size on the dynamic compressive properties of open-celled aluminum foams.

Kanahashi, H., Mukai, T., Nieh, T. G., Aizawa, T. & Higashi, K., 1800, In : Materials Transactions.. 43 [10] (2002), p. 2548-2553

Research output: Contribution to journalArticle

Effect of extrusion conditions on properties of hot extruded Mg composite with Mg2Si dispersions via solid-state synthesis

Tsuzuki, R., Du, W., Kondoh, K., Aizawa, T. & Yuasa, E., 1800, In : Materials Science Forum.. 419-422 (2003), p. 789-794

Research output: Contribution to journalArticle

Effect of processing parameters on thermoelectric properties of p-type (Bi2Te3)0.25 (Sb2Te3)0.75 prepared via BMA-HP method.

Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : Materials Chemistry and Physics.. 70 (2001), p. 90-94

Research output: Contribution to journalArticle

Effects of cell geometry on the compressive properties of nickel foam.

Yamada, Y., Wen, C., Shimojima, K., Mabuchi, M., Nakamura, M., Asahina, T., Aizawa, T. & Higashi, K., 1800, In : Materials Transactions.. 41 [9] (2000), p. 1136-1138

Research output: Contribution to journalArticle

Effects of magnetically controlled microgravity and hypergravity environment on amphibian behavior

Y., F., K, K., M, N., T, S., N., F., H, H., K, S., K, K., T., Y., Y., T., A., K. & Shinkai, T., 1800, In : Space Utiliz. Res..

Research output: Contribution to journalArticle

Ellipsometric characterization on multi-layered thin film systems during hydrogenation.

Santjojo, D. J., Aizawa, T. & Muraishi, S., 1800, In : Materials Transactions. 48, p. 1380-1386

Research output: Contribution to journalArticle

Environmentally benign fabricating process of magnesium alloy by cyclic plastic working in solid-state.

Kondoh, K. & Aizawa, T., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1276-1283

Research output: Contribution to journalArticle

Environmentally benign manufacturing of automotive parts via powder metallurgy.

Fujiki, A., Kojima, H. & Aizawa, T., 1800, In : Materials Transaction.. 43 [3] (2002), p. 348-351

Research output: Contribution to journalArticle

Estimation of mean acoustic reflection coefficient of polycrystalline aggregate.

Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In : Applied Physics Letters.. 66 (1995), p. 956-958

Research output: Contribution to journalArticle

Experimental and theoretical evaluation on thermoelectricity for SPS-joined p-n module in Bi-Te system.

Kim, S. S., Yamamoto, S., Aizawa, T. & Yamamoto, A., 1800, In : Materials Transactions.. 46 [7] (2005), p. 1506-1513

Research output: Contribution to journalArticle

Experimental study for improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

H.Kanahashi, H. K., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M., Aizawa, T. & Higashi, K., 1800, In : Materials Science and Engineering.. A 308 (2001), p. 283-287

Research output: Contribution to journalArticle

Fabrication of CrN/Cr2N bulk composites and their mechanical properties.

Aizawa, T., Kuwahara, H. & Tamura, M., 1800, In : J. American Ceramic Society.. 85 (2002)., p. 61-64

Research output: Contribution to journalArticle

Fabrication of nanostructured titanium thin films via N ion implantation and post-annealing treatment.

Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In : Surface Coating Technology.. 188-189 (2004), p. 260-264

Research output: Contribution to journalArticle

Fabrication of Ni-sheathed nickel aluminide wires from mechanically alloyed precursors.

Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A239-240 (1997), p. 522-531

Research output: Contribution to journalArticle

Fabrication of SUS 304 regularly cell-structured materials and their mechanical properties.

Tantikom, K., Kanahashi, H., Yamamoto, S. & Aizawa, T., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1290-1294

Research output: Contribution to journalArticle

Feasibility of plasma nitriding for effective surface treatment of pure aluminum.

Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1412-1418

Research output: Contribution to journalArticle

Forging characteristics of AZ31 Mg alloy.

Chino, Y., Mabuchi, M., Shimojima, K., Yamada, Y., Wen, C., Miwa, K., Nakamura, M., Higashi, K. & Aizawa, T., 1800, In : Materials Transactions.. 42 [3] (2001), p. 414-417

Research output: Contribution to journalArticle

Formation of protection layer during oxidation of Al-implanted TiN coating.

Akhadejdamrong, T., Iwamoto, C., Ikuhara, Y., Mitsuo, A. & Aizawa, T., 1800, In : Materials Transactions.. 43 [6] (2002), p. 1291-1297

Research output: Contribution to journalArticle

Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In : Materials Transactions.. 42 (2001), p. 1312-1316

Research output: Contribution to journalArticle

Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

Xu, Y. & Aizawa, T., 1800, In : Ceramic Transaction.. 89 (1998), p. 205-216

Research output: Contribution to journalArticle

Granular Modeling Approach to Electro-Packaging Materials.

Aizawa, T., Iwai, T. & Kihara, J., 1800, In : J. Mechanics of Materials.. (1998), p. 83-91

Research output: Contribution to journalArticle