Graduate School of Engineering and Science

Research Output

Filter
Article
1800

Quantitative nondestructive evaluation on the ceramic coating by the acoustic spectro microscopy.

Aizawa, T., Ito, M. & Kihara, J., 1800, In : Japanese J. Tribology.. 40-3 (1995), p. 171-179

Research output: Contribution to journalArticle

Reaction-induced phase separation from supersaturated solid solution to nitride in thin films.

Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In : Surface Coating Technology.. 188-189 (2004), p. 431-434

Research output: Contribution to journalArticle

Reaction synthesis of refractory disilicides by mechanical alloying and shock reactive synthesis techniques.

Yen, B. K., Aizawa, T., Kihara, J. & Sakakibara, N., 1800, In : Materials Science and Engineering. A239-240 (1997), p. 515-521

Research output: Contribution to journalArticle

Resintering behavior of alumina compact on the route of controlled fracture forming.

W.B.Du, W. B. D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Default journal. 46 [2] (1999), p. 125-130

Research output: Contribution to journalArticle

Shock compaction of Al-based nanocrystal materials using on ion-beam device.

Tsuchida, M., Aizawa, T. & K.Horioka, K. H., 1800, In : J. Materials Processing Technology.. 85 (1998), p. 148-152

Research output: Contribution to journalArticle

Shock reactive synthesis of (Mo, Ti) sillicides from pretreated powders.

Aizawa, T., Sakakibara, N., Yen, B. K. & Syono, Y., 1800, In : Ceramic Transaction (Innovative Processing and Synthesis of Ceramics). 87 (1997), p. 135-142

Research output: Contribution to journalArticle

Shock reactive synthesis of refractory metal aluminides from a mechanically alloyed precursor.

Aizawa, T., Asakawa, Y. & Kihara, J., 1800, In : Ann. Chim.. 20 (1995), p. 181-196

Research output: Contribution to journalArticle

Shock reactive synthesis of TiAl.

Aizawa, T., Kamenosono, S., Kihara, J., Kato, T., Tanaka, K. & Nakayama, Y., 1800, In : J. Intermetallics.. 3 (1995), p. 369-379

Research output: Contribution to journalArticle

Smoothed Particle Modeling for Ceramic Injection Molding.

Iwai, T., Aizawa, T. & Kihara, J., 1800, In : Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 167-172

Research output: Contribution to journalArticle

Solid state recycle processing for magnesium alloy wastes via direct hot forging.

Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In : Materials Transactions.. 43 [3] (2002), p. 322-325

Research output: Contribution to journalArticle

Solid state recycling of recyclable aluminum wastes with in-process microstructure control.

Aizawa, T., Luangvaranunt, T. & Kondoh, K., 1800, In : Materials Transaction.. 43 [3] (2002), p. 315-321

Research output: Contribution to journalArticle

Solid-state synthesis of hydrogen storage Mg2Co alloys via bulk mechanical alloying

Wang, Y., Aizawa, T. & Nishimura, C., 1800, In : Materials Transactions. 47, p. 1052-1057

Research output: Contribution to journalArticle

Solid-state synthesis of magnesium alloys.

Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 299-310

Research output: Contribution to journalArticle

Solid-state synthesis of magnesium thermoelectric alloys via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : MRS Symposium Proceedings. 980 (2007), p. 205-210

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si1-xYx (Y = Ge and Si) thermoelectric materials via bulk mechanical alloying.

R.Song, R. S., Aizawa, T., Yamamoto, A. & Obara, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 347-350

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si from Mg-Si mixture powder.

Kondoh, K., Oginuma, H., Yuasa, E. & Aizawa, T., 1800, In : Materials Transactions.. 42 (2001), p. 1293-1300

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process

Kondoh, K., Yuasa, E. & Aizawa, T., 1800, In : Materials Science Forum.. 419-422 (2003), p. 419-422

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si via bulk mechanical alloying.

Aizawa, T. & Ichige, K-I., 1800, In : Materials Science Forum.. 351 (2000), p. 333-338

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : Mater. Sci. Forum..

Research output: Contribution to journalArticle

Solid-state synthesis of Mg-Si-Ge ternary thermoelectric materials..

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions. 46 [7] (2005), p. 1490-1496

Research output: Contribution to journalArticle

Solid state synthesis of non-equilibrium phase in Mg-Co and Mg-Fe systems via bulk mechanical alloying..

Aizawa, T., Hasehira, K-I. & Nishimura, C., 1800, In : Materials Transactions.. 44 [4] (2003), p. 601-610

Research output: Contribution to journalArticle

Steel Powder Compaction and Forming Analysis.

Tamura, S., Aizawa, T., Mitsuno, T. & Kihara, J., 1800, In : The International Journal of Powder Metallurgy.. 34 [1] (1998), p. 1-11

Research output: Contribution to journalArticle

Structure of surface wave on coarse-grained nickel by acoustic spectro-microscopy.

Yu, Y., Aizawa, T. & Kihara, J., 1800, In : Material Transactions, JIM.. 37 (1996), p. 1690-1698

Research output: Contribution to journalArticle

Superplastic forging analysis by the multi-level modeling.

Aizawa, T., 1800, In : Materials Science Form.. 306 (1999), p. 621-630

Research output: Contribution to journalArticle

Superplastic injection forming of magnesium alloys.

Aizawa, T. & Mabuchi, M., 1800, In : Materials Science Forum.. 357 (2001), p. 35-40

Research output: Contribution to journalArticle

Surface controlled materials evaluation for Al-implanted Ni alloys.

Aizawa, T., Mitsuo, A. & Kihara, J., 1800, In : Nondestructive Characterization of Materials.. VI (1994), p. 13-20

Research output: Contribution to journalArticle

Surface nano-structuring of Zr thin film via Ni-implantation.

Muraishi, S. & Aizawa, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 65-68

Research output: Contribution to journalArticle

Surface reaction of magnesium in Hank's solutions.

Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 349-358

Research output: Contribution to journalArticle

Surface wave velocity determination by using reflection coefficient method on the liquid - anisotropic - solid interface.

Xu, Y. & Aizawa, T., 1800, In : J. Acoustic Society, America.. 107 [3] (2000), p. 1777-1780

Research output: Contribution to journalArticle

Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A220 (1996), p. 8-14

Research output: Contribution to journalArticle

Synthesis of Mg2Ni alloy by bulk mechanical alloying.

Aizawa, T., Kuji, T. & Nakano, H., 1800, In : J. Alloys and Compounds.. 291 (1999), p. 248-253

Research output: Contribution to journalArticle

T. Aizawa, R. Song and A. Yamamoto: Solid state synthesis of ternary thermoelectric magnesium alloy, Mg2Si1-xSnx.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions.. 47 [4] (2006), p. 1058-1065

Research output: Contribution to journalArticle

Texture control of bulk mechanical alloyed Bi-Te thermoelectric materials via shear extrusion.

Kim, S. S. & Aizawa, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 197-200

Research output: Contribution to journalArticle

The grain size and texture dependence of tensile properties in extruded Mg-9Al-1Zn.

Mabuchi, M., Chino, Y., Iwasaki, H., Aizawa, T. & Higashi, K., 1800, In : Materials Transactions.. 42 [7] (2001), p. 1182-1189

Research output: Contribution to journalArticle

The parallel logic programming system in the FGCS Project and its future directions

Uchida, S., Aiba, A., Rokusawa, K., Chikayama, T. & Hasegawa, R., 1800, In : Parallel Computing.

Research output: Contribution to journalArticle

Thermal and mechanical coupling in granular modeling for metal injection molding.

Iwai, T., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 42 (1994), p. 175-185

Research output: Contribution to journalArticle

Thermodynamic properties of Mg2.0Ni hydrides.

Kuji, T., Nakano, H. & Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 311-314

Research output: Contribution to journalArticle

Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Sceience Forum.

Research output: Contribution to journalArticle

Thermoelectric pn junction prepared on the route of bulk mechanical alloying..

Yang, Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : Default journal.

Research output: Contribution to journalArticle

Thermoelectric properties of anisotropy-controlled p-type Bi-Te-Sb system via bulk mechanical alloying and shear extrusion.

Kim, S. S., Yamamoto, S. & Aizawa, T., 1800, In : J. Alloys and Compounds.. 375 [1-2] (2004), p. 107-113

Research output: Contribution to journalArticle

Thermoelectric properties of Mg2Si1-xSnx systems synthesized by bulk mechanical alloying.

R.Song, R. S., Liu, Y. & Aizawa, T., 1800, In : Chinese J. Aeronautics. 19 (2006), p. S134-S138

Research output: Contribution to journalArticle

Thermoelectric properties of n-type (Bi2Se3)x(Bi2Te3)1-x prepared by bulk mechanical alloying and hot pressing.

Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : J. Alloys and Compounds.. 312 (2000), p. 326-330

Research output: Contribution to journalArticle

Thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1-x prepared via bulk mechanical alloying and hot pressing.

Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : J. Alloys and Compounds.. 309 (2000), p. 225-228

Research output: Contribution to journalArticle

Three- Dimensional Finite Element Process Simulation for Green Materials with Element Control.

Aizawa, T., Terziyski, J. & Kihara, J., 1800, In : Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 173-180

Research output: Contribution to journalArticle

Three dimensional forging simulations with finite element control.

Terziyski, J., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 45 (1994), p. 75-80

Research output: Contribution to journalArticle

Three dimensional granular modeling for metallic powder compaction and flow analysis.

Tamura, S., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 42 (1994), p. 175-185

Research output: Contribution to journalArticle

Tribological properties of magnesium composite alloy with in-situ synthesized Mg2Si dispersoids.

Kondoh, K., Oginuma, H. & Aizawa, T., 1800, In : Materials Transactions.. 44 [4] (2003), p. 524-530

Research output: Contribution to journalArticle

Tribological property of Mg composites via powder metallurgy process.

Muramatsu, H., Kondoh, K., Aizawa, T. & Yuasa, E., 1800, In : Materials Science Forum.. 419-422 (2003), p. 801-804

Research output: Contribution to journalArticle