Master's program

Research output

Research output per year 1976 2021

• 4453 Article
• 2002 Conference contribution
• 393 Conference article
• 253 Paper
• 200 More
  • 60 Chapter
  • 42 Editorial
  • 42 Review article
  • 19 Meeting Abstract
  • 14 Comment/debate
  • 7 Abstract
  • 5 Foreword/postscript
  • 5 Letter
  • 4 Book
  • 1 Poster
  • 1 Short survey

Research output per year

Research output per year

Search results

• 2020

  Dynamic indoor space reconstruction using temporal point clouds

  Nozaki, R. & Nakagawa, M., 2020 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Navigation
  • Escalators
  • Blueprints
  • 3D modeling
  • Labeling

• Filtering of bridge-slab bending effect in terrestrial laser scanning

  Nakagawa, M., Sasaki, K., Matsuda, S. & Ito, H., 2020 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Scanning
  • Lasers
  • 3D modeling
  • Experiments

• Performance evaluation of single frequency RTK-GNSS positioning for structure inspection using wearable sensors

  Kurita, K., Takahashi, S. & Nakagawa, M., 2020 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Wearable sensors
  • Inspection
  • Antennas
  • Surveying
  • Costs

• Processing speed improvement on SFM using panoramic images based on camera direction constraints

  Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Cameras
  • Image acquisition
  • Image matching
  • Costs
  • Image processing

• Rapid and efficient extraction of inert platinum group metals from HNO3(aq) at elevated temperature

  Zheng, Z., Arai, T. & Takao, K., 2020 Jan 1, p. 999-1001. 3 p.

  Research output: Contribution to conference › Paper › peer-review

  • Platinum
  • Metals
  • Temperature
  • Negative ions

• Real-time mapping of construction workers using multilayered LiDAr

  Nakagawa, M., Kaseda, M. & Taguchi, M., 2020 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Satellites
  • Drilling
  • Data acquisition
  • Navigation
• 2019

  Experimental study on the reinforced concrete pile-cap with a pile, exterior column and foundation beam

  Kishida, S. & Mukai, T., 2019, p. 2229-2242. 14 p.

  Research output: Contribution to conference › Paper › peer-review

  • Piles
  • Reinforced concrete
  • Shear strength
  • Pile foundations
  • Structural members

• Shear capacity evaluation of unbonded precast prestressed concrete beam-column joints caused volume loss by sheath tubes

  Tajima, Y. & Kishida, S., 2019, p. 2207-2216. 10 p.

  Research output: Contribution to conference › Paper › peer-review

  • Precast concrete
  • Prestressed concrete
  • Shear strength
  • Seismic design
• 2018

  A study of field condition feedback to a remote controlled underwater heavy machine operator

  Nozaki, Y., Yoshimi, T. & Fuchiyama, S., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Excavators
  • Feedback
  • Water
  • Experiments

• Automatic tracking camera system for construction machines by combined image processing

  Inoue, M. & Yoshimi, T., 2018.

  Research output: Contribution to conference › Paper › peer-review

  • Image processing
  • Cameras
  • Object detection
  • Control systems
  • Template matching
  1 Citation (Scopus)

• Crack detection from high-resolution aerial triplet images for safer collapse investigations in high mountain areas

  Nakagawa, M., Igusa, R., Usuki, N., Takigawa, M., Nishimura, N., Katsumata, Y. & Eguchi, T., 2018 Jan 1, p. 1269-1276. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  • Crack detection
  • high mountain
  • crack
  • Antennas
  • detection

• Efficiency improvement for multi-position of receiver in 13.56 MHz wireless power transfer coupling system

  Cuong, N. T. & Akatsu, K., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Inductive power transmission
  • Electric vehicles
  • Transmitters
  • Magnetic resonance
  • Acoustic impedance

• Study of High-speed SRM with Amorphous steel sheet for EV

  Tomioka, T., Aiso, K. & Akatsu, K., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Steel sheet
  • Electric vehicles
  • Electric losses
  • Traction motors
  • Strength of materials
  1 Citation (Scopus)

• Study on the automation of grinding process of mold material

  Sawa, T., 2018.

  Research output: Contribution to conference › Paper › peer-review

  • Grinding wheels
  • Acoustic waves
  • Automation
  • Microphones
  • Specifications

• The research on high precision machining of vertical wall

  Tamaki, K., Akamatsu, T., Anzai, M. & Sawa, T., 2018.

  Research output: Contribution to conference › Paper › peer-review

  • Machining
  • Steel
  • Direction compound
  • Experiments
• 2017

  An experimental result of influence of visual presentation method on subjective evaluation of moving boat noise

  Muto, K., Hosono, S. & Tokunaga, Y., 2017 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • boats
  • evaluation
  • visual stimuli
  • sound pressure
  • monitors
  2 Citations (Scopus)

• A study on improvement level of speech quality with covering bone conduction microphone for MRI examination

  Inagaki, M., Muto, K., Takahashi, K. & Yagi, K., 2017 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • bones
  • magnetic resonance
  • coverings
  • examination
  • conduction
  1 Citation (Scopus)

• Basic study to reduce polishing process in mold manufacturing - Relationship between the surface pattern after machining and the polishing property -

  Sawa, T., 2017, p. 1205-1209. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  • Polishing
  • Machining
  • Surface roughness
  • Industrial Oils
  • Direction compound

• Efficiency improvement of sfm using image blocks for infrastructure inspection

  Nakagawa, M., Miwa, K., Nozue, S., Sekiguchi, Y., Hirate, K., Noda, Y. & Miyo, M., 2017.

  Research output: Contribution to conference › Paper › peer-review

  • Inspection
  • Experiments
  • Cameras

• Flaking concrete detection with hammering inspection methodology based on machine learning

  Saso, H., Katsuki, F. & Nakagawa, M., 2017 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Machine learning
  • Inspection
  • Concretes
  • Geographic information systems
  • Concrete construction

• Image feature-based SLAM for flat surface modeling in indoor environment

  Kobayashi, T. & Nakagawa, M., 2017.

  Research output: Contribution to conference › Paper › peer-review

  • Cameras
  • Experiments

• Influence of Ca-addition amount on corrosion behavior of Ca-added Mg alloys

  Shimada, Y., Tsunakawa, M., Nakamura, K. & Ishizaki, T., 2017.

  Research output: Contribution to conference › Paper › peer-review

  • corrosion
  • Corrosion
  • Sodium chloride
  • Precipitates
  • corrosion resistance

• Preparation of corrosion resistant film on magnesium alloys with different aluminum contents by steam coating

  Tsunakawa, M., Shimada, Y., Nakamura, K. & Ishizaki, T., 2017.

  Research output: Contribution to conference › Paper › peer-review

  • Steam
  • Aluminum
  • magnesium alloys
  • steam
  • Magnesium alloys

• Representation of Ethnic Identity Thorough Spatial Conservation of the House and the Dwelling in Northern Thailand

  Shimizu, I., Tansukanun, P. & Sooksawasdi, S., 2017 Jul 16, p. 1-24.

  Research output: Contribution to conference › Paper › peer-review

• STRAIN ANALYSES OF NONLINEAR CRACK BEHAVIOR AT ELEVATED TEMPERATURE BY FINITE ELEMENT METHOD AND MOIRE TOPOGRAPHICAL METHOD.

  Aizawa, T., Yagawa, G. & Ando, Y., 2017 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Crack propagation
  • Image processing
  • Cracks
  • Finite element method
  • Creep
• 2016

  Corrosion behavior of flame-resistant Calcium-added Magnesium alloy in NaCl aqueous solution containing various anion species

  Tsunakawa, M., Shiratori, R., Nakamura, K. & Ishizaki, T., 2016 Jan 1, p. 1559-1565. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  • Calcium alloys
  • Negative ions
  • magnesium alloys
  • Anions
  • Sodium chloride

• Improving function detecting object for AGV

  Varagul, J. & Ito, T., 2016, p. 24-33. 10 p.

  Research output: Contribution to conference › Paper › peer-review
• 2015

  Comprehensive study on the efficient superheated steam drying kinetics of the low rank coal from Belchatow deposit in Poland

  Zakrzewski, M., Komatsu, Y., Sciazko, A., Akiyama, T., Kimijima, S., Hashimoto, A., Shikazono, N., Kaneko, S. & Szmyd, J. S., 2015.

  Research output: Contribution to conference › Paper › peer-review

  • Deposits
  • Drying
  • Coal
  • Steam
  • Lignite

• GIS based for developing support application of concrete construction under the various environment

  Ishida, H., Anno, S. & Iyoda, T., 2015 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Geographic information systems
  • Concrete construction
  • Civil engineering
  • Economics
• 2014

  An application of the generalized least squares method to the analysis of the heat transfer process with supplementary data

  Sciazko, A., Komatsu, Y., Kimijima, S., Kolenda, Z. S. & Szmyd, J. S., 2014.

  Research output: Contribution to conference › Paper › peer-review

  • least squares method
  • methodology
  • heat transfer
  • Mathematical models
  • Heat transfer

• A study on warning activation timing of rear-end collision with driver model of neural network

  Hirose, T., Kaneko, Y., Kasuga, N. & Sawada, T., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Alarm systems
  • Chemical activation
  • Neural networks
  • Braking
  • Deceleration

• Detection and notification of dangerous obstacles and places for visually impaired persons using a smart cane

  Niitsu, Y., Taniguchi, T. & Kawashima, K., 2014 Jan 1, p. 68-69. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  • Stairs
  • Sensors
  • Experiments
  12 Citations (Scopus)

• Prediction of the meta-stability phase through analysis of driving behavior

  Ito, T. & Kaneyasu, R., 2014.

  Research output: Contribution to conference › Paper › peer-review

  • Phase stability
  • traffic behavior
  • traffic
  • travel
  • driver

• Reducing signal transmission loss by low surface roughness

  Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Surface roughness
  • Copper
  • Metal foil
  • Printed circuit boards
  • Dielectric losses

• Robust watermarking method by systematic block diffusion using discrete cosine transform

  Ohzeki, K., Bannai, K., Wei, Y. Y., Hirakawa, Y. & Sato, K., 2014 Jan 1, p. 112-121. 10 p.

  Research output: Contribution to conference › Paper › peer-review

  • Discrete cosine transforms
  • Watermarking
  • Pixels
  • Experiments

• Signal transmission loss due to copper surface roughness in high-frequency region

  Liew, E., Malaysia, M. C. F., Malaysia, S. A., Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Surface roughness
  • Copper
  • Metal foil
  • Printed circuit boards
  • Dielectric losses
  4 Citations (Scopus)

• The effect of a safety education web system on driving behaviour: A self-learning system using videos of driving recorders

  Michisita, T., Ishizaki, H., Yasuda, T., Tokunaga, S., Toritsuka, T., Ukena, K. & Kasuga, N., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Learning systems
  • Education
  • Hazards
  • Simulators
  • Experiments

• Vibration control evaluation for underwater structures using non-contact laser excitation

  Umenai, K., Hosoya, N. & Kajiwara, I., 2014.

  Research output: Contribution to conference › Paper › peer-review

  • Laser excitation
  • Underwater structures
  • Laser ablation
  • Pulsed lasers
  • Vibration control
• 2013

  Adaptive control for magnetostrictive actuated nano-positioner

  Chen, X., Feng, Y. & Su, C. Y., 2013 Jan 1, p. 32-37. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • Friction
  • Actuators
  • Position control
  • Hysteresis

• A design of self-sustained gel actuator

  Kato, T., Hosoya, N. & Maeda, S., 2013 Jan 1, p. 34-36. 3 p.

  Research output: Contribution to conference › Paper › peer-review

  • Gels
  • Actuators
  • Polymers
  • Functional materials
  1 Citation (Scopus)

• A fast adaptive algorithm in frequency domain for multichannel feedforward acive noise control system

  Wang, H., Zhu, M., Chen, G. & Muto, K., 2013 Jan 1, p. 2058-2065. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  • preprocessing
  • sensors
  • rooms
  • impulses
  • performance

• A finite element analysis of board level drop reliability test and analysis of stress buffer effect of polyimide

  Fujita, M., Anzai, N., Sakamaki, K. & Kariya, Y., 2013 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Polyimides
  • Finite element method

• A self-assembling method for polymer gel components

  Katayama, S., Maeda, S., Hara, Y. & Hashimoto, S., 2013 Jan 1, p. 79-84. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • Gels
  • Polymers
  • Coulomb interactions
  • Self assembly
  • Static Electricity
  2 Citations (Scopus)

• A study of collision avoidance between service robot and human at corner - Analysis of human behavior at corner

  Hashimoto, K., Yoshimi, T., Mizukawa, M., Ando, Y. & Takeuchi, K., 2013 Jan 1, p. 383-384. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  • Collision avoidance
  • Robots
  • Trajectories
  1 Citation (Scopus)

• A study on position measurement system using laser range finder for excavation machine head hung by wires

  Inoue, F., Sasaki, T. & Hashimoto, H., 2013 Jan 1, p. 2397-2401. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  • Range finders
  • Position measurement
  • Excavation
  • Lasers
  • Wire

• Close-range stereo registration for concrete crack monitoring

  Nakagawa, M., Katuki, F., Isomatu, Y. & Kamada, T., 2013 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Deterioration
  • Concretes
  • Cracks
  • Monitoring
  • Experiments
  1 Citation (Scopus)

• Demonstration of a heterogeneous multi-core processor with 3-D inductive coupling links

  Koizumi, Y., Miura, N., Take, Y., Matsutani, H., Kuroda, T., Amano, H., Sakamoto, R., Namiki, M., Usami, K., Kondo, M. & Nakamura, H., 2013 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Multi-core Processor
  • 3D
  • Particle accelerators
  • Accelerator
  • Demonstrations

• Development of a remote control system of a mobile robot using RSNP

  Ishida, S. & Matsuhira, N., 2013 Jan 1, p. 197-202. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • Mobile robots
  • Network protocols
  • Control systems
  • Mathematical operators
  • Experiments
  4 Citations (Scopus)

• Development of the ubiquitous pulse wave sensor for fall detection

  Imai, S. & Hasegawa, T., 2013 Jan 1, p. 715-716. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  • Sensors
  • Light modulators
  • Angular velocity
  • Transient analysis

• Dynamic profiling and feedback framework for reduce-side join

  Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2013 Dec 1, p. 1255-1262. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  • Feedback
  • Servers