Research Output

Filter
Conference contribution
2019

Cure Shrinkage Behavior Analysis in Ultraviolet Curable Adhesive using Finite Element Method

Sato, Y. & Kariya, Y., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735106. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deformation Behavior of Pressurized Sintered Ag Nanoparticles in Discrete Type Power Semiconductor Device

Nagata, K., Kariya, Y. & Horie, S., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735247. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of Adhesive Fracture Energy of Polyimide Interlayer Dielectric Film for Redistribution Layer of Semiconductor Package

Ono, K. & Kariya, Y., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735249. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue Life Prediction of BGA Solder Joint with Consideration of Microstructural Coarsening

Moroka, K. & Kariya, Y., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735151. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fracture Analysis of Vertical Direction Crack in Die Attach Joint for Power Semiconductor Device

Sugimoto, H., Kariya, Y., Hanada, R., Fukumoto, A., Ito, Y. & Soda, S., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735334. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High Temperature Fatigue Crack Propagation Characteristics of Pressureless Sintered Silver Nanoparticles

Osaki, K., Kariya, Y., Mizumura, N. & Sasaki, K., 2019 May 1, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735315. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improved superconducting performance of Ag-added nano-diamond doped MgB 2

Dadiel, J. L., Miryala, M. & Murakami, M., 2019 Jan 1, Superconductivity and Particle Accelerators 2018. Bocian, D. & Romaniuk, R. S. (eds.). SPIE, 110540I. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11054).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infiltration growth processing of bulk mixed REBa 2 Cu 3 O 7-x superconductors: Nano-metal oxides and rare earth elements effects on micro-structural properties

Pavan Kumar Naik, S., Nagaveni, K., Swarup Raju, P. M., Miryala, M., Koblischka, M. R., Koblischka-Veneva, A. D., Oka, T., Iwasa, Y., Ogino, H., Eisaki, H. & Murakami, M., 2019 Jan 1, Superconductivity and Particle Accelerators 2018. Bocian, D. & Romaniuk, R. S. (eds.). SPIE, 110540H. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11054).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

International individual internship based on research collaboration on engineering education and academic science

Oka, T., Murakami, M., Sengoku, M., Sato, T., Ogawa, J., Yamagiwa, K., Suzuki, T., Nishimura, S. Y. & Kaneko, F., 2019 Jan 29, 2018 World Engineering Education Forum - Global Engineering Deans Council, WEEF-GEDC 2018. Institute of Electrical and Electronics Engineers Inc., 8629681. (2018 World Engineering Education Forum - Global Engineering Deans Council, WEEF-GEDC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transformation of waste marigold flowers into porous carbons via hydrothermal carbonization

Chaiammart, N., Wongcharoen, S., Eiad-Ua, A., Ishizaki, T. & Panomsuwan, G., 2019 Jan 1, Green Convergence on Materials Frontiers II. Amornsakchai, T. (ed.). Trans Tech Publications Ltd, p. 23-29 7 p. (Key Engineering Materials; vol. 824 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Ar-plasma-modulated optical reset in the SiO2/Cu conductive-bridge resistive memory stack

Kawashima, T., Yew, K. S., Zhou, Y., Ang, D. S., Zhang, H. Z. & Kyuno, K., 2018 Jan 1, ECS Transactions. Magyari-Kope, B., Bersuker, G., Kobayashi, K., Hacker, C., Park, J. G., Shingubara, S., Saito, Y., Karim, Z., Shima, H., Kubota, H. & Obeng, Y. S. (eds.). 3 ed. Electrochemical Society Inc., Vol. 86. p. 55-64 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 Jan 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 Jan 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947481

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature dependence of fatigue crack propagation rate of pressureless sintered Ag nanoparticles

Kimura, R., Kariya, Y., Mizumura, N. & Sasaki, K., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947482

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Higher thermal cycling reliability of power semiconductor module for power converters

Morozumi, A., Hokazono, H., Nishimura, Y., Kariya, Y., Mochizuki, E. & Takahashi, Y., 2016 Jun 7, 2016 International Conference on Electronics Packaging, ICEP 2016. Institute of Electrical and Electronics Engineers Inc., p. 405-410 6 p. 7486857

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study of measuring method for corrosion behavior analysis in low concentration solution

Yagi, Y., Suzuki, R. & Noda, K., 2016 Jan 1, Corrosion General Poster Session. 26 ed. Electrochemical Society Inc., Vol. 75. p. 7-15 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Effect of MgB4 Addition on the Superconducting Properties of Polycrystalline MgB2

Ishiwata, J., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 69-72 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

From Cyano-aromatic Molecules to Nitrogen-doped Carbons by Solution Plasma for the Oxygen Reduction Reaction in Alkaline Medium

Panomsuwan, G., Saito, N. & Ishizaki, T., 2015, Materials Today: Proceedings. 8 ed. Elsevier Ltd, Vol. 2. p. 4302-4308 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improvement in the Performance of Bulk MgB2 Material through Optimization of Sintering Process

Kobayashi, H., Miryala, M., Koblischka, M. R., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 73-76 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 Aug 10, MATEC Web of Conferences. EDP Sciences, Vol. 21. 09002

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Preparation and Characterization of DyBa2Cu3Oy Thick Films with Dy2BaO4 Precursor

Kawata, S., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 61-64 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, Vol. 833. p. 215-221 7 p. (Materials Science Forum; vol. 833).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, MATEC Web of Conferences. EDP Sciences, Vol. 21. 08002

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, Vol. 81. p. 1427-1432 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014 Jan 1, Metal Forming 2014. Fratini, L. & Micari, F. (eds.). Trans Tech Publications Ltd, p. 64-71 8 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Corrosion analysis of zinc rich epoxy coatings on steel in NaCl solution

Sofian, A. & Noda, K., 2013 Jan 1, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 2171-2176 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Corrosion performance of zinc-rich paints (ZRP) on mild steel in NaCl solution

Sofian, A. H., Tanaka, A. & Noda, K., 2013 Oct 22, Corrosion (General) - 221st ECS Meeting. 19 ed. p. 17-24 8 p. (ECS Transactions; vol. 45, no. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion resistance enhancement of 304 stainless steel under droplet of chloride solution by mechanical surface treatment

Widodo, T. D. & Noda, K., 2013 Jan 1, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 2423-2429 7 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of temperature and strain rate on low-cycle fatigue life of Bi-Sn eutectic alloy

Sato, T., Kariya, Y. & Fukui, K., 2013 Dec 1, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. (ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Localized corrosion resistance of Co-Cr alloy in NaCl solution

Suzuki, R., Noda, K., Tsutsumi, Y. & Hanawa, T., 2013 Jan 1, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 2451-2454 4 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mapping of phase distribution in electron holography with a stage-scanning system

Lei, D., Mitsuishi, K., Harada, K., Shimojo, M., Ju, D. & Takeguchi, M., 2013 Apr 10, Advanced Materials Science and Technology. p. 152-155 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructural analysis of low-cycle fatigue damage process of Sn-Ag-Cu solder joint

Kontani, H., Kariya, Y. & Fumikura, T., 2013 Dec 1, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. (ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013 Mar 11, Micro Manufacturing Techniques and Applications. p. 23-37 15 p. (Applied Mechanics and Materials; vol. 289).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Quaternary alloy of Ni-Zn-Cu-P from hypophosphite based electroless deposition method

Zaimi, M. & Noda, K., 2013 Oct 22, Corrosion (General) - 221st ECS Meeting. 19 ed. p. 3-16 14 p. (ECS Transactions; vol. 45, no. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2012

Duplex coating of AISI 316 and 420 die for hot mold stamping

Aizawa, T., Fukuda, T. & Itoh, K., 2012 Jan 1, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 1055-1058 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micro-pattern imprinting onto aluminum thin sheet by CNC-controlled stamping

Aizawa, T. & Fukuda, T., 2012 Jan 1, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 739-742 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Wet chemical synthesis of Ni-Al nanoparticles at ambient condition

Fadil, N. A., Govindachetty, S., Yoshikawa, H., Yamashita, Y., Ueda, S., Kobayashi, K., Tanabe, T., Hara, T., Gubbala, V. R., Murakami, H., Noda, K. & Abe, H., 2012 Oct 15, Advanced Materials and Processes II. p. 442-447 6 p. (Advanced Materials Research; vol. 557-559).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Application of scanning confocal electron microscopy to nanomaterials and the improvement in resolution by image processing

Zhang, X., Takeguchi, M., Hashimoto, A., Mitsuishi, K. & Shimojo, M., 2011 Mar 17, Advanced Material Science and Technology. p. 259-262 4 p. (Materials Science Forum; vol. 675 677).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cell adhesion behaviors on polyethylene terephthalate surface modified by surface-wave plasma-initiated graft polymerization

Ishizaki, T., Andreeva, N. & Saito, N., 2011 Nov 23, Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011. p. 437-440 4 p. (Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of precise micro press forming system for fabrication of micro parts

Yang, M., Aizawa, T., Nakano, S. & Ito, K., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1093-1096 4 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Dry transfer stamping by nano-laminated DLC-coated tool

Morita, H., Aizawa, T., Yoshida, N. & Kurozumi, S., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1103-1108 6 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Effect of cyclic strain-hardening exponent on fatigue ductility exponent for Sn based alloy

Kanda, Y., Oto, Y., Shiigi, Y. & Kariya, Y., 2011 Dec 1, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 713-718 6 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue life and fracture behavior of micro size Sn-Ag-Cu solder joint

Naoki, T., Kariya, Y. & Kanda, Y., 2011 Dec 1, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 707-712 6 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fine micro-stamping system for micro-pattern printing onto polymers and glasses

Aizawa, T., Itoh, K. & Fukuda, T., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1097-1102 6 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Improvement of polymer type EB resist sensitivity and line edge roughness

Otani, M., Asada, H., Tsunoda, H., Kunitake, M., Ishizaki, T. & Miyagawa, R., 2011 Jul 25, Photomask and Next-Generation Lithography Mask Technology XVIII. 808107. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8081).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

On-demand release of corrosion-inhibiting molecules from layerd double hydroxide film formed on magnesium alloy

Ishizaki, T., Teshima, K. & Saito, N., 2011 Nov 23, Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011. p. 421-424 4 p. (Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

A trial of FGM bearings with solid lubricant

Hashimoto, T., Kohri, H., Yumoto, A. & Shiota, I., 2010 Feb 9, Multiscale, Multifunctional and Functionally Graded Materials. p. 465-470 6 p. (Materials Science Forum; vol. 631-632).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of joint size on low-cycle fatigue properties of Sn-Ag-Cu solder joint

Kariya, Y., Sato, K., Asari, S. & Kanda, Y., 2010 Aug 9, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501298. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Fabrication of apatite/titanium functionally graded coating using supersonic free-jet PVD

Yumoto, A., Yamamoto, T., Shiota, I. & Niwa, N., 2010 Feb 9, Multiscale, Multifunctional and Functionally Graded Materials. p. 187-192 6 p. (Materials Science Forum; vol. 631-632).

Research output: Chapter in Book/Report/Conference proceedingConference contribution