Research Output

Filter
Conference contribution

ANALYSIS OF FRACTURE PARAMETERS FOR BENDING-TYPE SPECIMENS.

Aizawa, T. & Yagawa, G., 1985, ASTM Special Technical Publication. ASTM, p. 197-213 17 p. (ASTM Special Technical Publication).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ar-plasma-modulated optical reset in the SiO2/Cu conductive-bridge resistive memory stack

Kawashima, T., Yew, K. S., Zhou, Y., Ang, D. S., Zhang, H. Z. & Kyuno, K., 2018 Jan 1, ECS Transactions. Magyari-Kope, B., Bersuker, G., Kobayashi, K., Hacker, C., Park, J. G., Shingubara, S., Saito, Y., Karim, Z., Shima, H., Kubota, H. & Obeng, Y. S. (eds.). 3 ed. Electrochemical Society Inc., Vol. 86. p. 55-64 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A study on quenching characteristics of YBaCuO bulk superconductor with deposited Ag layer

Fukuda, K., Fujita, H., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2007 Dec 1, Electrical Contacts 2007: Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts. p. 76-81 6 p. 4318198. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcium phosphate precipitation by galvanic current between titanium and gold in pseudo-body fluid

Kobayashi, E., Ogo, M., Doi, H., Yoneyama, T., Noda, K. & Hanawa, T., 2007 Dec 1, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. p. 653-656 4 p. (Materials Science Forum; vol. 539-543, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact resistance characteristics of high temperature superconducting Bulk- III

Imaizumi, T., Yamamoto, N., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2004 Dec 1, Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. p. 416-420 5 p. (Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Contact resistance characteristics of high temperature superconducting bulk- Part IV

Fujita, H., Imaizumi, T., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2005 Dec 1, Electrical Contacts 2005 - Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts. p. 272-276 5 p. 1518256. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Contact resistance characteristics of high temperature superconducting bulk - Part V

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 Jan 1, Electrical Contacts 2006: Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts. Institute of Electrical and Electronics Engineers Inc., p. 124-130 7 p. 4063111. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Contact resistance characteristics of YBaCuO superconductors with deposited metal layer

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 Dec 1, 23rd International Conference on Electrical Contacts, ICEC 2006 - together with the 6th International Session on Electromechanical Devices, IS-EMD 2006. p. 390-395 6 p. (23rd International Conference on Electrical Contacts, ICEC 2006 - together with the 6th International Session on Electromechanical Devices, IS-EMD 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Controlled elasticity in nano-structured metallic glass by ion implantation method

Muraishi, S., Naito, H., Shi, J., Nakamura, Y. & Aizawa, T., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1315-1318 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion analysis of zinc rich epoxy coatings on steel in NaCl solution

Sofian, A. & Noda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 2171-2176 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Corrosion behavior of Al-Al3Ni and Al-Al2Cu functionally graded materials fabricated by a centrifugal method

Noda, K., Miyahara, K. & Watanabe, Y., 2008 Mar 13, Multiscale and Functionally Graded Materials - Proceedings of the International Conference, FGM IX. p. 574-578 5 p. (AIP Conference Proceedings; vol. 973).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Corrosion behavior of type 304 and 316 stainless steels under stress loading environment

Suzuki, K. & Noda, K., 2008 Dec 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 ed. p. 15-21 7 p. (ECS Transactions; vol. 16, no. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion behavior of zirconium based alloys in simulated body fluids

Tsutsumi, Y., Takano, Y., Doi, H., Noda, K. & Hanawa, T., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1489-1492 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Corrosion performance of zinc-rich paints (ZRP) on mild steel in NaCl solution

Sofian, A. H., Tanaka, A. & Noda, K., 2013 Oct 22, Corrosion (General) - 221st ECS Meeting. 19 ed. p. 17-24 8 p. (ECS Transactions; vol. 45, no. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion resistance enhancement of 304 stainless steel under droplet of chloride solution by mechanical surface treatment

Widodo, T. D. & Noda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 2423-2429 7 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion resistance evaluation of a functionally graded material using an electrochemical sensor

Saitoh, T., Kakefuda, K., Noda, K. & Watanabe, Y., 2008 Mar 13, Multiscale and Functionally Graded Materials - Proceedings of the International Conference, FGM IX. p. 965-970 6 p. (AIP Conference Proceedings; vol. 973).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cure Shrinkage Behavior Analysis in Ultraviolet Curable Adhesive using Finite Element Method

Sato, Y. & Kariya, Y., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735106. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deformation Behavior of Pressurized Sintered Ag Nanoparticles in Discrete Type Power Semiconductor Device

Nagata, K., Kariya, Y. & Horie, S., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735247. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Degradation of solid polymer membrane in PEFC by hydrogen peroxide

Kato, S., Masahira, Y., Noda, K. & Imai, H., 2008 Dec 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 ed. p. 1-5 5 p. (ECS Transactions; vol. 16, no. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Development of precise micro press forming system for fabrication of micro parts

Yang, M., Aizawa, T., Nakano, S. & Ito, K., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1093-1096 4 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 Jan 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (eds.). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Dry transfer stamping by nano-laminated DLC-coated tool

Morita, H., Aizawa, T., Yoshida, N. & Kurozumi, S., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1103-1108 6 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Duplex coating of AISI 316 and 420 die for hot mold stamping

Aizawa, T., Fukuda, T. & Itoh, K., 2012 Jan 1, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 1055-1058 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic deformation of regularly cell-structured materials

Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 2004 Jan 1, Explosion, Shock Wave and Hypervelocity Phenomena in Materials. Itoh, S., Hokamoto, K. & Fujita, M. (eds.). Trans Tech Publications Ltd, p. 13-20 8 p. (Materials Science Forum; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Dynamic response of the fuel safety experimental capsule under pressure wave and water hammer

Yoshie, S., Nakamura, T. & Aizawa, T., 2003 Jan 1, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part D, Symposia. Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). American Society of Mechanical Engineers, p. 3019-3026 8 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 2 D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of cyclic strain-hardening exponent on fatigue ductility exponent for Sn based alloy

Kanda, Y., Oto, Y., Shiigi, Y. & Kariya, Y., 2011 Dec 1, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 713-718 6 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of initial density and detonation condition to explosive powder processing for Ti-Al intermetallics

Aizawa, T., Tamagawa, J., Tanaka, K. & Kihara, J., 1992 Dec 1, Particulate Materials and Processes. Publ by Metal Powder Industries Federation, p. 319-333 15 p. (Advances in Powder Metallurgy; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of joint size on low-cycle fatigue properties of Sn-Ag-Cu solder joint

Kariya, Y., Sato, K., Asari, S. & Kanda, Y., 2010 Aug 9, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501298. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Effect of MgB4 Addition on the Superconducting Properties of Polycrystalline MgB2

Ishiwata, J., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 69-72 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Effect of Ni addition on bending properties of Sn-Ag-Cu lead-free solder joints

Kobayashi, T., Kariya, Y., Sasaki, T., Tanaka, M. & Tatsumi, K., 2007, Proceedings - 57th Electronic Components and Technology Conference 2007, ECTC '07. p. 684-688 5 p. 4249956. (Proceedings - Electronic Components and Technology Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Effect of temperature and strain rate on low-cycle fatigue life of Bi-Sn eutectic alloy

Sato, T., Kariya, Y. & Fukui, K., 2013 Dec 1, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. (ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of cross-linkage and hydroxyl groups on bonding strength between titanium and segmented polyurethane through 3-(trimethoxysilyl) propyl methacrylate

Sakamoto, H., Hirohashi, Y., Doi, H., Noda, K. & Hanawa, T., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1477-1480 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End corrosion of galvanized steels under atmospheric corrosion environment

Sekita, K., Hirano, T. & Noda, K., 2008 Dec 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 ed. p. 7-13 7 p. (ECS Transactions; vol. 16, no. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of Adhesive Fracture Energy of Polyimide Interlayer Dielectric Film for Redistribution Layer of Semiconductor Package

Ono, K. & Kariya, Y., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735249. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of patterned domains with graphitic clusters in amorphous carbon using a combination of ion implantation and electron irradiation techniques

Iwamura, E. & Aizawa, T., 2005 Jan 1, Growth, Modification and Analysis by Ion Beams at the Nanoscale. Materials Research Society, p. 108-113 6 p. (Materials Research Society Symposium Proceedings; vol. 908).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Fatigue life and fracture behavior of micro size Sn-Ag-Cu solder joint

Naoki, T., Kariya, Y. & Kanda, Y., 2011 Dec 1, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 707-712 6 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fatigue Life Prediction of BGA Solder Joint with Consideration of Microstructural Coarsening

Moroka, K. & Kariya, Y., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735151. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fine micro-stamping system for micro-pattern printing onto polymers and glasses

Aizawa, T., Itoh, K. & Fukuda, T., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1097-1102 6 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

FINITE ELEMENT ANALYSIS OF EQUILIBRIA OF IDEAL MHD PLASMAS IN TORUS REGIONS.

Kikuchi, F. & Aizawa, T., 1984 Dec 1, Finite Elements in Fluids. John Wiley & Sons, p. 311-323 13 p. (Finite Elements in Fluids; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fracture Analysis of Vertical Direction Crack in Die Attach Joint for Power Semiconductor Device

Sugimoto, H., Kariya, Y., Hanada, R., Fukumoto, A., Ito, Y. & Soda, S., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735334. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

From Cyano-aromatic Molecules to Nitrogen-doped Carbons by Solution Plasma for the Oxygen Reduction Reaction in Alkaline Medium

Panomsuwan, G., Saito, N. & Ishizaki, T., 2015, Materials Today: Proceedings. 8 ed. Elsevier Ltd, Vol. 2. p. 4302-4308 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Granular modeling of steel powder flow and compaction in injection molding

Aizawa, T., Iwai, T. & Kihara, J., 1992 Dec 1, Proc Powder Injection Molding Symp 92. Publ by Metal Powder Industries Federation, p. 419-433 15 p. (Proc Powder Injection Molding Symp 92).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Granular modeling simulator for powder compaction processes

Tamura, S., Aizawa, T. & Kihara, J., 1992 Dec 1, Compaction and Other Consolidation Processes. Publ by Metal Powder Industries Federation, p. 29-41 13 p. (Advances in Powder Metallurgy; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Higher thermal cycling reliability of power semiconductor module for power converters

Morozumi, A., Hokazono, H., Nishimura, Y., Kariya, Y., Mochizuki, E. & Takahashi, Y., 2016 Jun 7, 2016 International Conference on Electronics Packaging, ICEP 2016. Institute of Electrical and Electronics Engineers Inc., p. 405-410 6 p. 7486857

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

High frequency bipolar pulsed spark electrohydraulic discharge characteristics and plasma parameters of liquid solution plasmas

Miron, C., Chang, J. S., Takeda, T., Saito, N. & Takai, O., 2008, GD 2008 - 17th International Conference on Gas Discharges and Their Applications. p. 489-492 4 p. 5379368. (GD 2008 - 17th International Conference on Gas Discharges and Their Applications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

High Temperature Fatigue Crack Propagation Characteristics of Pressureless Sintered Silver Nanoparticles

Osaki, K., Kariya, Y., Mizumura, N. & Sasaki, K., 2019 May, Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019. Institute of Electrical and Electronics Engineers Inc., 1 p. 8735315. (Proceedings of 2019 6th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Improved superconducting performance of Ag-added nano-diamond doped MgB 2

Dadiel, J. L., Miryala, M. & Murakami, M., 2019 Jan 1, Superconductivity and Particle Accelerators 2018. Bocian, D. & Romaniuk, R. S. (eds.). SPIE, 110540I. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11054).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improvement in the Performance of Bulk MgB2 Material through Optimization of Sintering Process

Kobayashi, H., Miryala, M., Koblischka, M. R., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 73-76 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Infiltration growth processing of bulk mixed REBa 2 Cu 3 O 7-x superconductors: Nano-metal oxides and rare earth elements effects on micro-structural properties

Pavan Kumar Naik, S., Nagaveni, K., Swarup Raju, P. M., Miryala, M., Koblischka, M. R., Koblischka-Veneva, A. D., Oka, T., Iwasa, Y., Ogino, H., Eisaki, H. & Murakami, M., 2019 Jan 1, Superconductivity and Particle Accelerators 2018. Bocian, D. & Romaniuk, R. S. (eds.). SPIE, 110540H. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11054).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influence of al concentration on deformation behavior and fracture mode of fe-30mn-6(SI, AL) alloys

Ogawa, K., Sawaguchi, T., Kikuchi, T., Koyama, M. & Murakami, M., 2008 Dec 1, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 645-652 8 p. (SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)