Research Output

Filter
Conference contribution

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013, Applied Mechanics and Materials. Vol. 289. p. 23-37 15 p. (Applied Mechanics and Materials; vol. 289).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 622-623. p. 64-71 8 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanoscale pinning media in bulk melt-textured high-tc superconductors and their importance for super-magnet applications

Miryala, M., Sakai, N., Jirsa, M., Murakami, M. & Hirabayashi, I., 2009, Ceramic Engineering and Science Proceedings. 8 ed. Vol. 29. p. 159-167 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimal chain length of peg to improve cytocompatibility of rgd/peg/ti material

Hanawa, T., Kurashima, K., Oya, K., Yusuketsustumi, A., Doi, H., Nomura, N. & Noda, K., 2011, 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pitting corrosion behavior and grain evolution of shot peened type 304 stainless steel

Widodo, T. D. & Noda, K., 2012, ECS Transactions. 37 ed. Vol. 50. p. 273-277 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 Aug 10, MATEC Web of Conferences. EDP Sciences, Vol. 21. 09002

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 Jan 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; vol. 920 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Preparation and Characterization of DyBa2Cu3Oy Thick Films with Dy2BaO4 Precursor

Kawata, S., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, Vol. 65. p. 61-64 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Preparation of mono-dispersed droplet using ultrasonic

Arai, T., Imaizumi, K. & Takeda, K., 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 989-992 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Quaternary alloy of Ni-Zn-Cu-P from hypophosphite based electroless deposition method

Zaimi, M. & Noda, K., 2013, ECS Transactions. 19 ed. Vol. 45. p. 3-16 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Quenching characteristics of YBCO bulk contacts

Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. p. 319-324 6 p. 4694963

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, Vol. 833. p. 215-221 7 p. (Materials Science Forum; vol. 833).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape memory characteristics of Fe-30Mn-5Si-1Al and Fe28Mn-5Si-1 AI-5Cr alloys

Koyama, M., Murakami, M., Ogawa, K., Kikuchi, T. & Sawaguchi, S., 2008, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 653-658 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, MATEC Web of Conferences. EDP Sciences, Vol. 21. 08002

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of measuring method for corrosion behavior analysis in low concentration solution

Yagi, Y., Suzuki, R. & Noda, K., 2016 Jan 1, Corrosion General Poster Session. 26 ed. Electrochemical Society Inc., Vol. 75. p. 7-15 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947481

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface potential distribution observation of the surface modified of 304 stainless steel

Widodo, T. D. & Noda, K., 2013, ECS Transactions. 38 ed. Electrochemical Society Inc., Vol. 58. p. 53-59 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature dependence of fatigue crack propagation rate of pressureless sintered Ag nanoparticles

Kimura, R., Kariya, Y., Mizumura, N. & Sasaki, K., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947482

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The force relaxation in levitating high Tc superconductor

Ito, E., Komano, Y., Sawa, K., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 Mar 31, AIP Conference Proceedings. Vol. 824 II. p. 820-827 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The improvement of shape recovery property through training treatment in an Fe-30Mn-5Si-1Al

Koyama, M., Sawaguchi, T., Ogawa, K., Kikuchi, T. & Murakami, M., 2009, Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08. p. 583-586 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Thermal fatigue damage of quad flat pack leads and Sn-3.5Ag-X (X=Bi and Cu) solder joints

Warashina, K., Kariya, Y., Hirata, Y. & Otsuka, M., 1999 Jan 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 626-631 6 p. 747688

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Thermal fatigue life evaluation of CSP joints by mechanical fatigue testing

Kanda, Y., Zama, K., Kariya, Y., Oota, H., Kikuchi, S., Yamabe, H. & Nakamura, K., 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501291

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Transformation of waste marigold flowers into porous carbons via hydrothermal carbonization

Chaiammart, N., Wongcharoen, S., Eiad-Ua, A., Ishizaki, T. & Panomsuwan, G., 2019 Jan 1, Green Convergence on Materials Frontiers II. Amornsakchai, T. (ed.). Trans Tech Publications Ltd, p. 23-29 7 p. (Key Engineering Materials; vol. 824 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Visco-elastic effect of underfill material in reliability analysis of flip-chip package

Kanda, Y., Zama, K., Kariya, Y., Mikami, T., Kobayashi, T., Sato, T., Enomoto, T. & Hirata, K., 2010, Proceedings of the ASME InterPack Conference 2009, IPACK2009. Vol. 1. p. 755-759 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Wet chemical synthesis of Ni-Al nanoparticles at ambient condition

Fadil, N. A., Govindachetty, S., Yoshikawa, H., Yamashita, Y., Ueda, S., Kobayashi, K., Tanabe, T., Hara, T., Gubbala, V. R., Murakami, H., Noda, K. & Abe, H., 2012, Advanced Materials Research. Vol. 557-559. p. 442-447 6 p. (Advanced Materials Research; vol. 557-559).

Research output: Chapter in Book/Report/Conference proceedingConference contribution