Research Output

2020

A multiobjective optimization of a catalyst distribution in a methane/steam reforming reactor using a genetic algorithm

Pajak, M., Buchaniec, S., Kimijima, S., Szmyd, J. S. & Brus, G., 2020, (Accepted/In press) In : International Journal of Hydrogen Energy.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

A three-dimensional reconstruction of coal microstructure using the Cryo-FIB-SEM technique

Zakrzewski, M., Schertel, A., Brus, G., Wagner, M., Sciazko, A., Komatsu, Y., Kimijima, S., Kaneko, S. & Szmyd, J. S., 2020 Sep 1, In : Fuel. 275, 117919.

Research output: Contribution to journalArticle

Open Access

Autonomous oil flow generated by self-oscillating polymer gels

Yoshimura, K., Otsuka, Y., Mao, Z., Cacucciolo, V., Okutaki, T., Yamagishi, H., Hashimura, S., Hosoya, N., Sato, T., Yamanishi, Y. & Maeda, S., 2020 Dec 1, In : Scientific Reports. 10, 1, 12834.

Research output: Contribution to journalArticle

Open Access
Open Access
Open Access

Bubble-free System for Belousov-Zhabotinsky Gels

Otsuka, Y., Sato, Y. & Maeda, S., 2020 Jul, In : Chemistry Letters. 49, 7, p. 863-866 4 p.

Research output: Contribution to journalArticle

Open Access

Contraction waves in self-oscillating polymer gels

Mao, Z., Kuroki, M., Otsuka, Y. & Maeda, S., 2020 Sep, In : Extreme Mechanics Letters. 39, 100830.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Cuffless Blood Pressure Estimation Only an iPhone: Investigation on Cold Pressor Tests

Harada, I., Mochizuki, N., Rolfe, P., Shibata, M. & Yamakoshi, T., 2020 Jan 1, 15th Mediterranean Conference on Medical and Biological Engineering and Computing – MEDICON 2019 - Proceedings of MEDICON 2019. Henriques, J., de Carvalho, P. & Neves, N. (eds.). Springer, p. 874-877 4 p. (IFMBE Proceedings; vol. 76).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a sit-to-stand assistance chair for elderly people

Aharari, A. & Yang, W. S., 2020, In : International Journal of Reasoning-based Intelligent Systems. 12, 2, p. 149-155 7 p.

Research output: Contribution to journalArticle

Discussion on shear properties and flow model in screw tightening lubricant PIB under low sliding speed conditions

Otsu, T., Komatsu, K. & Hashimura, S., 2020 Nov, In : Tribology International. 151, 106474.

Research output: Contribution to journalArticle

Evaluation of viscoelastic-viscoplastic characteristics and finite element analyses for thermoplastics

Takaoka, H. & Sakaue, K., 2020 May 3, In : Advanced Composite Materials. 29, 3, p. 273-284 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Falling behavior and control effect on temperature rise under heating condition concerning water film flow on steel shutter surface

Ohmiya, Y., Tange, M., Nakamura, K. & Miyazawa, Y., 2020, In : Journal of Environmental Engineering. 85, 768, p. 97-105 9 p.

Research output: Contribution to journalArticle

Integrated on-chip 3D vascular network culture under hypoxia

Olmedo-Suárez, M. Á., Sekiguchi, T., Takano, A., Cañizares-Macías, M. D. P. & Futai, N., 2020 May 1, In : Micromachines. 11, 5, 475.

Research output: Contribution to journalArticle

Open Access

Investigation of Biological Signals Under the Stimulation of Basic Tastes

Hayashi, M., Sripian, P., Rajagopalan, U. M., Zhang, R. & Sugaya, M., 2020, Augmented Cognition. Theoretical and Technological Approaches - 14th International Conference, AC 2020, Held as Part of the 22nd HCI International Conference, HCII 2020, Proceedings. Schmorrow, D. D. & Fidopiastis, C. M. (eds.). Springer, p. 40-49 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 12196 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser biospeckle metrology in investigating plant-sound interactions

Hirai, M., Endo, D., Gonome, H., Kono, T., Yamada, J. & Rajagopalan, U. M., 2020, Optical Interactions with Tissue and Cells XXXI. Ibey, B. L. & Linz, N. (eds.). SPIE, 1123813. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 11238).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lighting system bioinspired by Haworthia obtusa

Gonome, H., Watanabe, K., Nakamura, K., Kono, T. & Yamada, J., 2020 Dec 1, In : Scientific Reports. 10, 1, 11246.

Research output: Contribution to journalArticle

Open Access

MEMS fabrication of compliant sheet for micro hexapod robots

Asamura, K. & Nagasawa, S., 2020 Jun 1, In : Japanese Journal of Applied Physics. 59, SI, SIIL03.

Research output: Contribution to journalArticle

Optical Communication and Positioning Method of Underwater Observation Apparatus for Environmental Monitor

Enomoto, E., Rajagopalan, U., Lee, S. Y., Zhang, X., Koike, Y., Yokoi, H., Nishikawa, H., Nagasawa, S., Futai, N., Kohno, T., Yamada, J., Shimojo, M. & Matsuo, S., 2020 Jan, 2020 10th Annual Computing and Communication Workshop and Conference, CCWC 2020. Chakrabarti, S. & Paul, R. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 784-788 5 p. 9031130. (2020 10th Annual Computing and Communication Workshop and Conference, CCWC 2020).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Posture stability control of a small inverted pendulum robot in trajectory tracking using a control moment gyro

Tanaka, K. & Nagasawa, S., 2020 Jan 1, (Accepted/In press) In : Advanced Robotics.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Self-Assembled 3D Actuator Using the Resilience of an Elastomeric Material

Hashimoto, N., Shigemune, H., Minaminosono, A., Maeda, S. & Sawada, H., 2020 Jan 15, In : Frontiers in Robotics and AI. 6, 152.

Research output: Contribution to journalArticle

Open Access
Open Access

Ultrahigh accurate statistical interferometric technique utilizing uniformity of speckle phase in the study of plant physiology

Rajagopalan, U. M., Kadono, H. & Kabir, M., 2020, Optical Interactions with Tissue and Cells XXXI. Ibey, B. L. & Linz, N. (eds.). SPIE, 1123815. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 11238).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Variable-horizon based Model Predictive Control for Tele-operation with Time-varying Delay

Arai, H., Nagakura, H. & Uchimura, Y., 2020 Jun, 2020 IEEE 29th International Symposium on Industrial Electronics, ISIE 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 586-591 6 p. 9152502. (IEEE International Symposium on Industrial Electronics; vol. 2020-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vascular remodeling processes in an integrated microfluidic device

Futai, N., Sano, T., Sumita, M., Takano, A., Yokokawa, R. & Miura, T., 2020, 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017. Chemical and Biological Microsystems Society, p. 1080-1081 2 p. (21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibrational communication system in ultrasonic frequency band

Takasawa, R. & Nagasawa, S., 2020 Jun 1, In : Japanese Journal of Applied Physics. 59, SI, SIIL05.

Research output: Contribution to journalArticle

2019

A cooperative control method for a mobile manipulator using the difference the manipulation with a robot control device

Naito, Y. & Matsuhira, N., 2019 Jun, 2019 16th International Conference on Ubiquitous Robots, UR 2019. Institute of Electrical and Electronics Engineers Inc., p. 219-223 5 p. 8768690. (2019 16th International Conference on Ubiquitous Robots, UR 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A deformable motor driven by dielectric elastomer actuators and flexible mechanisms

Minaminosono, A., Shigemune, H., Okuno, Y., Katsumata, T., Hosoya, N. & Maeda, S., 2019, In : Frontiers Robotics AI. 6, FEB, 1.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

A multiscale approach to the numerical simulation of the solid oxide fuel cell

Mozdzierz, M., Berent, K., Kimijima, S., Szmyd, J. S. & Brus, G., 2019 Mar, In : Catalysts. 9, 3, 253.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Analysis of the behaviour of charged particles in electrical relay devices

Iida, M., Koshimura, K., Kaneko, M. & Saeki, M., 2019 Oct 16, In : Journal of Physics: Conference Series. 1322, 1, 012007.

Research output: Contribution to journalConference article

Open Access

A numerical analysis of unsteady transport phenomena in a Direct Internal Reforming Solid Oxide Fuel Cell

Chalusiak, M., Wrobel, M., Mozdzierz, M., Berent, K., Szmyd, J. S., Kimijima, S. & Brus, G., 2019 Mar 1, In : International Journal of Heat and Mass Transfer. p. 1032-1051 20 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

A radiation transfer based model for analyzing the effects of irradiation on human skin in laser treatments

Kono, T., Ogawa, N., Maheswari, R. U., Gonome, H. & Yamada, J., 2019, Proceedings of the 9th International Symposium on Radiative Transfer, RAD 2019. Begell House Inc., p. 179-186 8 p. (Proceedings of the International Symposium on Radiative Transfer; vol. 2019-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assessment of Dynamic Young’s Modulus and Damping Ratio of Bamboo Fiber Reinforced Polymer Composites using Shock Wave

Yamamoto, K., Takasaki, A. & Hosoya, N., 2019 Jan 1, Mechanisms and Machine Science. Springer Netherlands, p. 4217-4226 10 p. (Mechanisms and Machine Science; vol. 73).

Research output: Chapter in Book/Report/Conference proceedingChapter

Automating the mold-material grinding process

Sawa, T., 2019 Jan 1, In : International Journal of Automation Technology. 13, 6, p. 722-727 6 p.

Research output: Contribution to journalArticle

Balloon dielectric elastomer actuator speaker

Hosoya, N., Masuda, H. & Maeda, S., 2019 May 1, In : Applied Acoustics. 148, p. 238-245 8 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Basic Experiments for a Remote Control Robot-Mapping System in Complex Environment

Ke, L., Song, T., Pinrath, N., Yee, D. P. R. & Matsuhira, N., 2019 Aug, Proceedings of 2019 IEEE International Conference on Mechatronics and Automation, ICMA 2019. Institute of Electrical and Electronics Engineers Inc., p. 174-179 6 p. 8816250. (Proceedings of 2019 IEEE International Conference on Mechatronics and Automation, ICMA 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 Sep 15, In : Biochemical Engineering Journal. 149, 107239.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Collaborative robots system in a photography service using Kukanchi

Nakai, T., Nakamura, Y., Sasaki, T. & Matsuhira, N., 2019 Jan 24, 2018 IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO 2018. IEEE Computer Society, p. 111-116 6 p. 8625761. (Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO; vol. 2018-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 Jan 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (ed.). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; vol. 1034).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of dielectric elastomer actuators for vibration control at high frequencies

Kajiwara, I., Kitabatake, S., Hosoya, N. & Maeda, S., 2019 Jul 1, In : International Journal of Mechanical Sciences. 157-158, p. 849-857 9 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Design optimization of a methane/steam reforming reactor using an evolutionary algorithm

Pajak, M., Buchaniec, S., Kimijima, S., Szmyd, J. S. & Brus, G., 2019, ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Stanek, W., Gladysz, P., Werle, S. & Adamczyk, W. (eds.). Institute of Thermal Technology, p. 407-418 12 p. (ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a mitigation system against hydrogen-air deflagrations in nuclear power plants

Saito, H., Otsuka, T., Yoshikawa, N., Kanno, N., Takanashi, S., Oozawa, Y., Hirata, M., Takeshita, M., Sakuragi, K., Kurihara, S., Tsunashima, Y., Aoki, N. & Tanaka, K., 2019 Jul 1, In : Journal of Loss Prevention in the Process Industries. 60, p. 9-16 8 p.

Research output: Contribution to journalArticle

Open Access

Development of detection method for clamped part stiffness in bolted joint

Hashimura, S., Komatsu, K., Shinohara, N., Nishioka, I. & Otsu, T., 2019 Apr 2, In : SAE Technical Papers. 2019-April, April

Research output: Contribution to journalConference article

Development of Tele-operation Support System for Remote Construction with Large Time Delay

Fujiwara, K., Kobayashi, K. & Uchimura, Y., 2019 Sep, 2019 58th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2019. Institute of Electrical and Electronics Engineers Inc., p. 1728-1733 6 p. 8859848. (2019 58th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 Jan 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (eds.). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; vol. 794).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Directional and velocity control of active droplets using a rigid-frame

Yamada, M., Shigemune, H., Maeda, S. & Sawada, H., 2019, In : RSC Advances. 9, 69, p. 40523-40530 8 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites

Ly, E. B., Lette, M. J., Diallo, A. K., Gassama, A., Takasaki, A. & Ndiaye, D., 2019 May 1, In : Fibers and Polymers. 20, 5, p. 1046-1053 8 p.

Research output: Contribution to journalArticle

Effect of surface roughness on film formation properties of screw tightening lubricant PIB

Otsu, T., Komatsu, K. & Hashimura, S., 2019 Aug 1, In : Tribology International. 136, p. 1-12 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effects of Clamp Force on Fatigue Strength of Aluminum Alloy Bolts

Hashimura, S., Kamibeppu, K., Nutahara, T., Fukuda, K. & Miyashita, Y., 2019, In : Procedia Structural Integrity. 19, p. 204-213 10 p.

Research output: Contribution to journalConference article

Open Access