Shibaura Institute of Technology

Research output

Research output per year 1970 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2023

• 11096 Article
• 2516 Conference contribution
• 509 Conference article
• 342 Paper
• 349 More
  • 98 Chapter
  • 80 Review article
  • 56 Editorial
  • 26 Comment/debate
  • 19 Meeting Abstract
  • 16 Exhibition
  • 12 Book
  • 10 Letter
  • 9 Patent
  • 7 Abstract
  • 6 Foreword/postscript
  • 5 Poster
  • 3 Short survey
  • 1 Chapter (peer-reviewed)
  • 1 Discussion paper

Research output per year

Research output per year

Search results

• 1800

  "Proposal of Virtual Transportation as an Idealized Alternative in Consumption Society."

  Horiuchi, Y., 1800, In: Systems: Journal of Transdisciplinary Science. 5(2000), p. 61-73

  Research output: Contribution to journal › Article › peer-review

• Protein Structure Prediction Based on Multi-Level Description

  Onizuka, K., Tsuda, H., Ishikawa, M. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｒｅｐｏｒｔ.

  Research output: Contribution to journal › Article › peer-review

• Pseudo surface wave on the (1012) plane of sapphire.

  Xu, Y. & Aizawa, T., 1800, In: J. Applied Physics.. 86 [11] (1999), p. 6507-6511

  Research output: Contribution to journal › Article › peer-review

• Quantitative nondestructive characterization of visco-elastic materials at high pressure.

  Aizawa, T., Ohno, J. & Kihara, J., 1800, In: Composites for the Pressure Vessel Industry.. ASME PVP-302 (1995), p. 121-140

  Research output: Contribution to journal › Article › peer-review

• Quantitative Nondestructive Evaluation of Surface Roughness Using Ultrasonic Reflectivity and Surface Wave Velocity.

  Aizawa, T. & Ihara, I., 1800, In: Ceramic Transaction.. 89 (1998), p. 159-170

  Research output: Contribution to journal › Article › peer-review

• Quantitative nondestructive evaluation on the ceramic coating by the acoustic spectro microscopy.

  Aizawa, T., Ito, M. & Kihara, J., 1800, In: Japanese J. Tribology.. 40-3 (1995), p. 171-179

  Research output: Contribution to journal › Article › peer-review

• Reaction-induced phase separation from supersaturated solid solution to nitride in thin films.

  Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In: Surface Coating Technology.. 188-189 (2004), p. 431-434

  Research output: Contribution to journal › Article › peer-review

• Reaction synthesis of refractory disilicides by mechanical alloying and shock reactive synthesis techniques.

  Yen, B. K., Aizawa, T., Kihara, J. & Sakakibara, N., 1800, In: Materials Science and Engineering. A239-240 (1997), p. 515-521

  Research output: Contribution to journal › Article › peer-review

• Resintering behavior of alumina compact on the route of controlled fracture forming.

  W.B.Du, W. B. D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Default journal. 46 [2] (1999), p. 125-130

  Research output: Contribution to journal › Article › peer-review

• Shock compaction of Al-based nanocrystal materials using on ion-beam device.

  Tsuchida, M., Aizawa, T. & K.Horioka, K. H., 1800, In: J. Materials Processing Technology.. 85 (1998), p. 148-152

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of (Mo, Ti) sillicides from pretreated powders.

  Aizawa, T., Sakakibara, N., Yen, B. K. & Syono, Y., 1800, In: Ceramic Transaction (Innovative Processing and Synthesis of Ceramics). 87 (1997), p. 135-142

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of refractory metal aluminides from a mechanically alloyed precursor.

  Aizawa, T., Asakawa, Y. & Kihara, J., 1800, In: Ann. Chim.. 20 (1995), p. 181-196

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of TiAl.

  Aizawa, T., Kamenosono, S., Kihara, J., Kato, T., Tanaka, K. & Nakayama, Y., 1800, In: J. Intermetallics.. 3 (1995), p. 369-379

  Research output: Contribution to journal › Article › peer-review

• Simultaneous Determination of Elastic Constants and Crystallographic Orientation in Coarse-Grained Nickel by Acoustic Spectro-Microscopy.

  Xu, Y., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM.38 [6] (1997) 536-545.. 38 [6] (1997), p. 536-545

  Research output: Contribution to journal › Article › peer-review

• Smoothed Particle Modeling for Ceramic Injection Molding.

  Iwai, T., Aizawa, T. & Kihara, J., 1800, In: Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 167-172

  Research output: Contribution to journal › Article › peer-review

• Solid state recycle processing for magnesium alloy wastes via direct hot forging.

  Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In: Materials Transactions.. 43 [3] (2002), p. 322-325

  Research output: Contribution to journal › Article › peer-review

• Solid state recycling of recyclable aluminum wastes with in-process microstructure control.

  Aizawa, T., Luangvaranunt, T. & Kondoh, K., 1800, In: Materials Transaction.. 43 [3] (2002), p. 315-321

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of hydrogen storage Mg2Co alloys via bulk mechanical alloying

  Wang, Y., Aizawa, T. & Nishimura, C., 1800, In: Materials Transactions. 47, p. 1052-1057

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of magnesium alloys.

  Aizawa, T., 1800, In: Materials Science Forum.. 351 (2000), p. 299-310

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of magnesium thermoelectric alloys via bulk mechanical alloying.

  Aizawa, T. & Song, R., 1800, In: MRS Symposium Proceedings. 980 (2007), p. 205-210

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si1-xYx (Y = Ge and Si) thermoelectric materials via bulk mechanical alloying.

  R.Song, R. S., Aizawa, T., Yamamoto, A. & Obara, T., 1800, In: J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 347-350

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si from Mg-Si mixture powder.

  Kondoh, K., Oginuma, H., Yuasa, E. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1293-1300

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process

  Kondoh, K., Yuasa, E. & Aizawa, T., 1800, In: Materials Science Forum.. 419-422 (2003), p. 419-422

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si via bulk mechanical alloying.

  Aizawa, T. & Ichige, K-I., 1800, In: Materials Science Forum.. 351 (2000), p. 333-338

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying.

  Aizawa, T. & Song, R., 1800, In: Mater. Sci. Forum..

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg-Si-Ge ternary thermoelectric materials..

  Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Transactions. 46 [7] (2005), p. 1490-1496

  Research output: Contribution to journal › Article › peer-review

• Solid state synthesis of non-equilibrium phase in Mg-Co and Mg-Fe systems via bulk mechanical alloying..

  Aizawa, T., Hasehira, K-I. & Nishimura, C., 1800, In: Materials Transactions.. 44 [4] (2003), p. 601-610

  Research output: Contribution to journal › Article › peer-review

• Steel Powder Compaction and Forming Analysis.

  Tamura, S., Aizawa, T., Mitsuno, T. & Kihara, J., 1800, In: The International Journal of Powder Metallurgy.. 34 [1] (1998), p. 1-11

  Research output: Contribution to journal › Article › peer-review

• Structure of surface wave on coarse-grained nickel by acoustic spectro-microscopy.

  Yu, Y., Aizawa, T. & Kihara, J., 1800, In: Material Transactions, JIM.. 37 (1996), p. 1690-1698

  Research output: Contribution to journal › Article › peer-review

• Superplastic forging analysis by the multi-level modeling.

  Aizawa, T., 1800, In: Materials Science Form.. 306 (1999), p. 621-630

  Research output: Contribution to journal › Article › peer-review

• Superplastic injection forming of magnesium alloys.

  Aizawa, T. & Mabuchi, M., 1800, In: Materials Science Forum.. 357 (2001), p. 35-40

  Research output: Contribution to journal › Article › peer-review

• Surface controlled materials evaluation for Al-implanted Ni alloys.

  Aizawa, T., Mitsuo, A. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 13-20

  Research output: Contribution to journal › Article › peer-review

• Surface nano-structuring of Zr thin film via　Ni-implantation.

  Muraishi, S. & Aizawa, T., 1800, In: J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 65-68

  Research output: Contribution to journal › Article › peer-review

• Surface reaction of magnesium in Hank's solutions.

  Aizawa, T., 1800, In: Materials Science Forum.. 351 (2000), p. 349-358

  Research output: Contribution to journal › Article › peer-review

• Surface wave velocity determination by using reflection coefficient method on the liquid - anisotropic - solid interface.

  Xu, Y. & Aizawa, T., 1800, In: J. Acoustic Society, America.. 107 [3] (2000), p. 1777-1780

  Research output: Contribution to journal › Article › peer-review

• Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A220 (1996), p. 8-14

  Research output: Contribution to journal › Article › peer-review

• Synthesis of Mg2Ni alloy by bulk mechanical alloying.

  Aizawa, T., Kuji, T. & Nakano, H., 1800, In: J. Alloys and Compounds.. 291 (1999), p. 248-253

  Research output: Contribution to journal › Article › peer-review

• T. Aizawa, R. Song and A. Yamamoto: Solid state synthesis of ternary thermoelectric magnesium alloy, Mg2Si1-xSnx.

  Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Transactions.. 47 [4] (2006), p. 1058-1065

  Research output: Contribution to journal › Article › peer-review

• Texture control of bulk mechanical alloyed Bi-Te thermoelectric materials via shear extrusion.

  Kim, S. S. & Aizawa, T., 1800, In: J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 197-200

  Research output: Contribution to journal › Article › peer-review

• "The 1992 Asilomar Conversation: A Journey for Sytems Travelers."

  Banathy, B. H., Dyer, G., Horiuchi, Y. & Pruzan, P., 1800, In: Default journal. 6(1994), p. 39-56

  Research output: Contribution to journal › Article › peer-review

• " The Fuschl Conversation 2002, The Y3K Team Summary Input Paper: Actions and Evolutionary Guidance for Y3K"

  Dyer, G., Hammond, D., Horiuchi, Y., Otsubo, M. & Rowl, G., 1800, In: Default journal. 14(2002), p. 91-103

  Research output: Contribution to journal › Article › peer-review

• The Fuschl Conversation 2004: Towards Y3K: A 2004 Prespective on Homonisation with Some Emphasis on Educational Systems

  Dyer, G., Gelepithis, P. A. M., Horiuchi, Y. & Prasad, K., 1800, In: Administration and Informatics. 17(2005), p. 1-17

  Research output: Contribution to journal › Article › peer-review

• The grain size and texture dependence of tensile properties in extruded Mg-9Al-1Zn.

  Mabuchi, M., Chino, Y., Iwasaki, H., Aizawa, T. & Higashi, K., 1800, In: Materials Transactions.. 42 [7] (2001), p. 1182-1189

  Research output: Contribution to journal › Article › peer-review

• The Hierarchical Constraint Logic Language CHAL

  Satoh, K. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｒｅｐｏｒｔ.

  Research output: Contribution to journal › Article › peer-review

• The parallel logic programming system in the FGCS Project and its future directions

  Uchida, S., Aiba, A., Rokusawa, K., Chikayama, T. & Hasegawa, R., 1800, In: Parallel Computing.

  Research output: Contribution to journal › Article › peer-review

• Thermal and mechanical coupling in granular modeling for metal injection molding.

  Iwai, T., Aizawa, T. & Kihara, J., 1800, In: J. Materials Processing Technology.. 42 (1994), p. 175-185

  Research output: Contribution to journal › Article › peer-review

• Thermodynamic properties of Mg2.0Ni hydrides.

  Kuji, T., Nakano, H. & Aizawa, T., 1800, In: Materials Science Forum.. 351 (2000), p. 311-314

  Research output: Contribution to journal › Article › peer-review

• Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route.

  Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Sceience Forum.

  Research output: Contribution to journal › Article › peer-review

• Thermoelectric pn junction prepared on the route of bulk mechanical alloying..

  Yang, Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Thermoelectric properties of anisotropy-controlled p-type Bi-Te-Sb system via bulk mechanical alloying and shear extrusion.

  Kim, S. S., Yamamoto, S. & Aizawa, T., 1800, In: J. Alloys and Compounds.. 375 [1-2] (2004), p. 107-113

  Research output: Contribution to journal › Article › peer-review