Shibaura Institute of Technology

Filter
Conference contribution

Search results

  • 2007

    Development and properties of high strengthened carbon steels produced by repetitive side extrusion and heat treatment process

    Aoki, K. & Azushima, A., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3 ed. Trans Tech Publications Ltd, p. 2884-2891 8 p. (Materials Science Forum; vol. 539-543, no. PART 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • Development of management system in mechatronics education applying project management method

    Eguchi, Y., Ando, Y. & Mizukawa, M., 2007 Dec 1, SICE Annual Conference, SICE 2007. p. 552-557 6 p. 4421044. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Development of pneumatic gait assist system

    Yamamoto, S., Miyoshi, T., Komeda, T., Hiramatsu, K., Nakazawa, K. & Akai, M., 2007 Dec 1, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 1337-1340 4 p. 4381961. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • Development of the rehabilitation system using haptic device

    Takahashi, Y., Miyoshi, T., Terada, T., Inoue, K., Ito, Y., Lee, H., Suzuki, T. & Komeda, T., 2007, Challenges for Assistive Technology. AAATE 07. Eizmendi, G., Azkoitia, J. M. & Craddock, G. (eds.). p. 409-413 5 p. (Assistive Technology Research Series; vol. 20).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Effect of Ni addition on bending properties of Sn-Ag-Cu lead-free solder joints

    Kobayashi, T., Kariya, Y., Sasaki, T., Tanaka, M. & Tatsumi, K., 2007, Proceedings - 57th Electronic Components and Technology Conference 2007, ECTC '07. p. 684-688 5 p. 4249956. (Proceedings - Electronic Components and Technology Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Citations (Scopus)
  • Effects of cross-linkage and hydroxyl groups on bonding strength between titanium and segmented polyurethane through 3-(trimethoxysilyl) propyl methacrylate

    Sakamoto, H., Hirohashi, Y., Doi, H., Noda, K. & Hanawa, T., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1477-1480 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Effects of source access resistance on gate lag in AlGaN/GaN HEMTs and current slump behavior

    Horio, K., Nakajima, A. & Itagaki, K., 2007 Dec 1, 65th DRC Device Research Conference. p. 67-68 2 p. 4373653. (65th DRC Device Research Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Electroplating of metal micro-structure using a resist micro-machined by proton beam writing

    Uchiya, N., Furuta, Y., Nishikawa, H., Watanabe, T., Haga, J., Satoh, T., Oikawa, M., Ohkubo, T., Ishii, Y. & Kamiya, T., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 288-289 2 p. 4456217. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Evaluation of thermal comfort and energy consumption in a room with different heating systems

    Omori, T., Tanabe, S. I. & Akimoto, T., 2007 Dec 1, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 51-58 8 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • Fabrication of Bi4Ti3O12 thin films using alcohol related solutions by micro liquid delivery systems

    Yamaguchi, M., Yamamoto, A. & Masuda, Y., 2007, 2007 16th IEEE International Symposium on the Applications of Ferroelectrics, ISAF. p. 126-129 4 p. 4393190. (IEEE International Symposium on Applications of Ferroelectrics).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Fabrication of high-aspect-ratio pillars by proton beam writing and application to DEP-devices

    Furuta, Y., Uchiya, N., Nishikawa, H., Haga, J., Oikawa, M., Satoh, T., Ishii, Y., Kamiya, T., Nakao, R. & Uchida, S., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 340-341 2 p. 4456243. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • Flow structure and flame stability in an opposite flow micro can combustor with a baffle plate

    Yahagi, Y., Sekiguti, M. & Suzuki, K., 2007, 5th US Combustion Meeting 2007. Combustion Institute, p. 2296-2303 8 p. (5th US Combustion Meeting 2007; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Haptic device system for upper limb motor and cognitive function rehabilitation: Grip movement comparison between normal subjects and stroke patients

    Takahashi, Y., Terada, T., Inoue, K., Ito, Y., Ikeda, Y., Lee, H. & Komeda, T., 2007 Dec 1, 2007 IEEE 10th International Conference on Rehabilitation Robotics, ICORR'07. p. 736-741 6 p. 4428507. (2007 IEEE 10th International Conference on Rehabilitation Robotics, ICORR'07).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Citations (Scopus)
  • Heating thermal comfort in highly air-tight and insulated house - Variation of peripheral skin temperature

    Akimoto, T., Emura, K., Tsuchikawa, T. & Saito, T., 2007, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 31-38 8 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Knowledge-based recurrent neural networks in reinforcement learning

    Le, T. D., Komeda, T. & Takagi, M., 2007, Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007. p. 169-174 6 p. (Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Laser-mode dynamics measurement and control of modelocked Er-fiber lasers

    Kobayashi, Y., Yoshitomi, D., Sakakibara, Y., Kataura, H., Takada, H., Kakehata, M., Torizuka, K., Onuma, T., Yokoi, H., Sekiguchi, T. & Nakamura, S., 2007 Dec 1, Conference on Lasers and Electro-Optics, 2007, CLEO 2007. 4452625. (Conference on Lasers and Electro-Optics, 2007, CLEO 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Laser-mode dynamics measurement and control of mode-locked er-fiber lasers

    Kobayashi, Y., Yoshitomi, D., Sakakibara, Y., Kataura, H., Takada, H., Kakehata, M., Torizuka, K., Onuma, T., Yokoi, H., Sekiguchi, T. & Nakamura, S., 2007 Jan 1, Conference on Lasers and Electro-Optics, CLEO 2007. Optical Society of America, (Optics InfoBase Conference Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Laser pointer as a mouse

    Wada, T., Takahashi, M., Kagawa, K. & Ohta, J., 2007, SICE Annual Conference, SICE 2007. p. 369-372 4 p. 4421010. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Citations (Scopus)
  • Lithography using focused high-energy proton beam for fabrication of high-aspect-ratio microstructures

    Nishikawa, H., Furuta, Y., Uchiya, N., Haga, J., Oikawa, M., Satoh, T., Ishii, Y. & Kamiya, T., 2007 Dec 1, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 66-67 2 p. 4456107. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Magnetically modified soft micro actuators for oocyte manipulation

    Yamanishi, Y., Sakuma, S. & Arai, F., 2007, 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS. IEEE Computer Society, p. 442-447 6 p. 4420896. (2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    22 Citations (Scopus)
  • Mass flow sensor using dual SAW device

    Nomura, T., Saitoh, A. & Koyama, K., 2007 Dec 1, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum, FCS. p. 25-30 6 p. 4319023. (Proceedings of the IEEE International Frequency Control Symposium and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Mixed reinforcement learning for partially observable Markov decision process

    Dung, L. T., Komeda, T. & Takagi, M., 2007 Oct 9, Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007. p. 7-12 6 p. 4269910. (Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • Muscle movements depend on position of the center-of-mass relative to the ankle center of rotation in humans

    Miyoshi, T., Yamamoto, H., Yamamoto, S. I., Koyama, H. & Komeda, T., 2007, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 1258-1262 5 p. 4381945. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Nano-graphitization in amorphous carbon films via electron beam irradiation and the iron implantation

    Iwamura, E. & Aizawa, T., 2007 Dec 1, Self Assembly of Nanostructures Aided by Ion- or Photon-Beam Irradiation: Fundamentals and Applications. p. 105-111 7 p. (Materials Research Society Symposium Proceedings; vol. 960).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Navigation of the autonomous mobile robot using laser range finder based on the non quantity map

    Kubota, S., Ando, Y. & Mizukawa, M., 2007 Dec 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2329-2333 5 p. 4406749. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)
  • Overview on low power SoC design technology

    Usami, K., 2007 Dec 1, Proceedings of the ASP-DAC 2007 - Asia and South Pacific Design Automation Conference 2007. p. 634-636 3 p. 4196103. (Proceedings of the Asia and South Pacific Design Automation Conference, ASP-DAC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Citations (Scopus)
  • Photodynamic perforation of cell membrane on Micro Channel Array toward intracellular technology

    Iso, K., Saito, T. K., Muguruma, H., Tabata, H. & Konishi, S., 2007, Proceedings - CIS Workshops 2007, 2007 International Conference on Computational Intelligence and Security Workshops, CISW 2007. p. 445-448 4 p. 4433067. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • Regional development through autonomy establishment in contemporary Western China -Regional development through autonomy establishment in contemporary Western China

    Liu, F., Hirano, M., Liu, P. & Zhang, J., 2007, 2007 IEEE International Engineering Management Conference - Proceedings, IEMC 2007. Institute of Electrical and Electronics Engineers Inc., p. 158-164 7 p. 5235081. (IEEE International Engineering Management Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Reinforcement learning in non-markovian environments using automatic discovery of subgoals

    Dung, L. T., Komeda, T. & Takagi, M., 2007 Dec 1, SICE Annual Conference, SICE 2007. p. 2601-2605 5 p. 4421430. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • Research on the "task localization" for distributed intelligence

    Minamino, H., Mizukawa, M. & Ando, Y., 2007 Dec 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2334-2338 5 p. 4406750. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Robust control for the uncertain systems preceded by hysteresis

    Chen, X., 2007 Dec 18, Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007. p. 533-538 6 p. 4303599. (Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Robust control for the uncertain systems preceded by hysteresis and disturbances

    Chen, X., Hisayama, T. & Su, C. Y., 2007, 22nd IEEE International Symposium on Intelligent Control, ISIC 2007. Part of IEEE Multi-conference on Systems and Control. IEEE Computer Society, p. 395-400 6 p. 4450918. (22nd IEEE International Symposium on Intelligent Control, ISIC 2007. Part of IEEE Multi-conference on Systems and Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Robust control for uncertain systems preceded by hysteresis and disturbances

    Chen, X. & Hisayama, T., 2007 Dec 1, SICE Annual Conference, SICE 2007. p. 234-241 8 p. 4420983. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • RuBLX: A Ruby-based batch language for Xgrid

    Suzuki, T. & Hamano, K., 2007 Dec 1, 21st European Conference on Modelling and Simulation: Simulations in United Europe, ECMS 2007. p. 691-696 6 p. (21st European Conference on Modelling and Simulation: Simulations in United Europe, ECMS 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Security door system using human tracking method with laser range finders

    Lee, J. H., Kim, Y. S., Kim, B. K., Ohba, K., Kawata, H., Ohya, A. & Yuta, S., 2007 Dec 18, Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007. p. 2060-2065 6 p. 4303868. (Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    15 Citations (Scopus)
  • Seismic performance of RC columns retrofitted with CFRP Strips

    Araki, H., Sato, R., Kabayama, K. & Nakata, M., 2007, Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures. p. 1121-1129 9 p. (Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • SOFC-MGT hybrid system using natural gas mixed with biomass gasified fuel

    Sucipta, M., Kimijima, S. & Suzuki, K., 2007, ECS Transactions - 10th International Symposium on Solid Oxide Fuel Cells, SOFC-X. 1 PART 2 ed. p. 1781-1790 10 p. (ECS Transactions; vol. 7, no. 1 PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • Speeding up reinforcement learning using recurrent neural networks in non-Markovian environments

    Le, T. D., Komeda, T. & Takagi, M., 2007, Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007. p. 179-184 6 p. (Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Spin dynamics of electron nuclei coupled system in a double quantum dot

    Çakir, Ö. & Takagahara, T., 2007, Physics of Semiconductors - 28th International Conference on the Physics of Semiconductors, ICPS 2006, Part A and B. p. 1107-1108 2 p. (AIP Conference Proceedings; vol. 893).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Stereo vision based motion identification

    Chen, X., 2007, Advanced Intelligent Computing Theories and Applications: With Aspects of Theoretical and Methodological Issues - Third International Conference on Intelligent Computing, ICIC 2007, Proceedings. Springer Verlag, p. 575-586 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4681 LNCS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Study on improvement of accuracy in end mill machining

    Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 Dec 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Synchronization of networked oscillators and its application

    Chen, X., 2007, Second International Conference on Innovative Computing, Information and Control, ICICIC 2007. IEEE Computer Society, p. 33-36 4 p. 4427679. (Second International Conference on Innovative Computing, Information and Control, ICICIC 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Synergetic effect of oxides on hydrogen reaction kinetics of magnesium hydride

    Patah, A., Takasaki, A. & Szmyd, J. S., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. Trans Tech Publications Ltd, p. 1605-1608 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • The analysis of near-miss cases using data-mining approach

    Kimura, M., Tatsuno, K., Hayasaka, T., Takahashi, Y., Aoto, T., Ohkura, M. & Tsuchiya, F., 2007, Human-Computer Interaction: HCI Intelligent Multimodal Interaction Environments - 12th International Conference, HCI International 2007, Proceedings. PART 4 ed. Springer Verlag, p. 474-483 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4553 LNCS, no. PART 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • The aqueous solutions with nonlinear surface energy and their application to flow boiling in a mini/micro tube

    Ono, N., Yoshida, T., Shoji, M. & Nishiguchi, S., 2007, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007. p. 1069-1076 8 p. (Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • The design and experiment of ion generator power supply for vacuum sputtering

    Chen, W. G., Rao, Y. H., Shan, C. H., Fujita, G. & Yasutoshi, T., 2007 Oct 1, Fourth Power Conversion Conference-NAGOYA, PCC-NAGOYA 2007 - Conference Proceedings. p. 931-935 5 p. 4239268. (Fourth Power Conversion Conference-NAGOYA, PCC-NAGOYA 2007 - Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Citations (Scopus)
  • Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route

    Aizawa, T., Song, R. & Yamamoto, A., 2007 Dec 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 2 ed. p. 1553-1556 4 p. (Materials Science Forum; vol. 534-536, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • The usability assessment of pharmaceutical package

    Ohkura, M., Harikae, T. & Tsuchiya, F., 2007 Jan 1, Human-Computer Interaction: HCI Intelligent Multimodal Interaction Environments - 12th International Conference, HCI International 2007, Proceedings. PART 4 ed. Springer Verlag, p. 508-517 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4553 LNCS, no. PART 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Ti-based quasicrystal layers produced by plasma thermal spraying

    Takasaki, A., Uematsu, S. & Kelton, K. F., 2007, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. Trans Tech Publications Ltd, p. 449-452 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Time synchronized wireless sensor network and its application to building vibration measurement

    Uchimura, Y., Nasu, T. & Takahashi, M., 2007 Dec 1, Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON. p. 2633-2638 6 p. 4460107. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)