• 235 Citations
  • 8 h-Index
1988 …2018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 235 Citations
  • 8 h-Index
  • 66 Article
  • 3 Conference contribution
  • 3 Conference article
2018

Flower-like BiVO4 microspheres and their visible light-driven photocatalytic activity

Zulkifili, A. N., Fujiki, A. & Kimijima, S., 2018 Jan 31, In : Applied Sciences (Switzerland). 8, 2, 216.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2017
2016
2015
1 Citation (Scopus)
2014
3 Citations (Scopus)
Open Access
2 Citations (Scopus)
2012

Comparing Compressive and Tensile strength of Sintered Steels for Automotive Parts

Fujiki, A., Yoshida, A. & uHirose, N., 2012 Oct 17, In : PM2012 CD. 1, p. 1-5

Research output: Contribution to journalArticle

Research on the PM Process of High Cu Content Steel Alloy Powder as the Basic Study for Wasted Automotive Materials Recycle System

Iwaoka, T., Fujiki, A. & Junnichi Asami, J. A., 2012 Oct 18, In : PM2012 CD. 1, p. 1-5

Research output: Contribution to journalArticle

2011
1 Citation (Scopus)
2010

New PM partsfor VVEL(variable valve event and lift system)

Kawase, K., Abe, T., Tsuruta, S., Kaminaga, T., Akasaka, Y., Yamada, Y. & Fujiki, A., 2010 Oct 11, In : 2010 PM World Congress Proceeding. CD

Research output: Contribution to journalArticle

New PM parts for VVEL (variable valve event and lift system)

Kawase, K., Abe, T., Tsuruta, S., Kaminaga, T., Akasaka, Y., Yamada, Y. & Fujiki, A., 2010 Jan 1, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), (Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantative analysis of die wall lubrication and new lubricant development

Fujiki, A., Maekawa, Y. & Adachi, K., 2010 Jun 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 28, 3, p. 230-234 5 p.

Research output: Contribution to journalArticle

2009

Developed new PM parts for new variable valve event and lift (VVEL) system in new engines

Fujiki, A., Yamada, Y., Tsuruta, S., Abe, T. & Kawase, K., 2009 Feb 1, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 56, 2, p. 82-84 3 p.

Research output: Contribution to journalArticle

Poisson's ratio of sintered materials for structural machine parts

Norimitsu, H., Junichi, A., Akira, F. & Kazuya, O., 2009 Jun 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 27, 3, p. 226-232 7 p.

Research output: Contribution to journalArticle

2007

Study of elastic moduli of sintered low alloy steels by acoustic pulse method

Hirose, N., Oouchi, K., Fujiki, A. & Asami, J., 2007 Dec 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. p. 749-752 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effects of powder type and compacting pressure on the Young's modulus and Poisson's ratio of sintered low alloy steels

Hirose, N., Asami, J., Fujiki, A. & Oouchi, K., 2007 Jun 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 25, 3, p. 228-132 97 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2006

Development of Co-free exhaust valve seat insert for automotive engines

Fujiki, A., Miyazawa, T., Oyanagi, M., Fujitsuka, H. & Kawata, H., 2006 Feb 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 24, 1, p. 18-23 6 p.

Research output: Contribution to journalArticle

Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels

Hirose, N., Tanaka, S. I., Fujiki, A. & Asami, J., 2006 Jan, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 53, 1, p. 31-35 5 p.

Research output: Contribution to journalArticle

Quantative analysis of die wall lubrication and new lubricant development

Fujiki, A., Maekawa, Y. & Adachi, K., 2006 Sep 1, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 53, 9, p. 713-717 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
Open Access

Tougher valve seats use two hard particles but no cobalt

Fujiki, A., Oyanagi, M., Miyazawa, T., Fujitsuka, H. & Kawata, H., 2005 Apr, In : Metal Powder Report. 60, 4, p. 20-22 3 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Poisson's ratio of sintered materials for structural machine parts

Hirose, N., Asami, J., Fujiki, A. & Oouchi, K., 2004 Jul, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 51, 7, p. 515-521 7 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Poisson's Ratio of Sintered Materials for Structural Machine Parts Ist report from JPMA Machine Parts Committee

hirose, N., junnichi, A. & Fujiki, K. OA., 2004 Oct 20, In : Default journal.

Research output: Contribution to journalArticle

The Development of a Cobalt-Free ExhaustValve Seat Insert

H.Fujitsuka, H. F., H.Kawata, H. K., M.Oyanagi, M. O., T.Miyazawa, T. M. & Fujiki, A., 2004 Mar 9, In : SAE TECHNICAL PAPER SERIES.

Research output: Contribution to journalArticle

The development of a cobalt-free exhaust valve seat insert

Fujitsuka, H., Kawata, H., Oyanagi, M., Miyazawa, T. & Fujiki, A., 2004 Jan 1, 2004 SAE World Congress. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

The development of Cobalt-free exhaust valve seat insert

Fujiki, A., fujitsuka, H., kawata, H., oyanagi, M. & miyazawa, T., 2004 Mar 21, In : SAE Technical Paper Series 2004-01-0502.

Research output: Contribution to journalArticle

The Development of cobalt-free exhaust valve seat insert material for automotive engines

Fujiki, A., oyanagi, M., miyazawa, T., kawata, H., hayashi, K. & fujitsuka, H., 2004 Oct 19, In : Default journal.

Research output: Contribution to journalArticle

2003

Development of cobalt -free exhaust valve seat insert material for automotive engines

Fujiki, A., oyanagi, M., miyazawa, T., kawata, H., hayashi, K. & fujitsuka, H., 2003 Oct 9, In : Trans. of the Material Reserch Soc. of Japan. 29, p. 1861-1866

Research output: Contribution to journalArticle

Development of warm compacted P/M sprockets for automotive engines

Fujiki, A., Kojima, H., Maekawa, Y., Yamaguchi, M., Murata, T., Sugaya, Y., Iwakiri, M. & Shibano, T., 2003 Feb 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 21, 1, p. 14-18 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Environmentally Friendly P/M Parts and Process for Automotive Applications

Fujiki, A. & Minagawa, K., 2003 Oct 8, In : Trans. of the Material Reserch Soc. of Japan. 29, p. 2219-2220

Research output: Contribution to journalArticle

Investigation of high saturation magnetization of low rare-earth content α-Fe/Nd2Fe14B bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2003 Apr 1, In : Journal of Applied Physics. 93, 7, p. 4060-4065 6 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Investigation of high saturation magnetization of low rare-earth content α-Fe-/Nd2Fe14B bulk exchange-spring magnets

H.ono, H. O., T.Tayu, T. T., Waki, N., T.Sugaya, T. S., M.Shimada, M. S., M.Kanou, M. K., H.Yamamoto, H. Y., K.Takasugi, K. T., Tani, M. & Fujiki, A., 2003 Apr 1, In : Journal of Applied Physics. 93, p. 4060-4065

Research output: Contribution to journalArticle

6 Citations (Scopus)

Properties ofα-Fe/Nd2Fe14B-Type Nd-Fe-C0-V-B System Bulk Exchange-Spring Magnets Prepared by Spark Plasma Sintering

H.ono, H. O., T.Tayu, T. T., N.Waki, N. W., T.Sugiyama, T. S., M.shimada, M. S., Mkanou, M., H.Yamamoto, H. Y., M.tani, M. T. & Fujiki, A., 2003 Jul 1, In : IEEE TRANSACTION OF MAGNETICS. 39, p. 2081-2088

Research output: Contribution to journalArticle

8 Citations (Scopus)

Properties of α-Fe/Nd2Fe14B-type Nd-Fe-Co-V-B system bulk exchange-spring magnets prepared by spark plasma sintering

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H. & Tani, M., 2003 Jul, In : IEEE Transactions on Magnetics. 39, 4 II, p. 2081-2088 8 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)
2002

Development of warm compacted and high temperature sintered P/M sprockets for silent chain system of DIG (Direct Injection Gasoline) automotive engines

Fujiki, A., Maekawa, Y., Mabuchi, Y., Watanabe, T., Sugaya, Y., Iwakiri, M. & Sibano, T., 2002 May, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 49, 5, p. 438-443 6 p.

Research output: Contribution to journalArticle

Open Access

Environmentally benign manufacturing of automotive parts via powder metallurgy

Fujiki, A., Kojima, H. & Aizawa, T., 2002 Mar, In : Materials Transactions. 43, 3, p. 348-351 4 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Magnetic properties of low rare-earth content (Nd = 2 - 7 at.%) α-Fe/Nd2Fe14B type bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2002 Feb, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 49, 2, p. 141-145 5 p.

Research output: Contribution to journalArticle

Open Access

Tough P/M Materials for Automotive  Applications

Fujiki, A., 2002 Jun 17, In : Advances in P/M and particulate materials 2002. p. 31-38

Research output: Contribution to journalArticle

2001

Isotropic bulk exchange-spring magnets with 134 kJ/m3 prepared by spark plasma sintering method

Ono, H., Waki, N., Shimada, M., Sugiyama, T., Fujiki, A., Yamamoto, H. & Tani, M., 2001 Jul, In : IEEE Transactions on Magnetics. 37, 4 I, p. 2552-2554 3 p.

Research output: Contribution to journalConference article

37 Citations (Scopus)

Present state and future prospects of powder metallurgy parts for automotive applications

Fujiki, A., 2001 Jan 15, In : Materials Chemistry and Physics. 67, 1-3, p. 298-306 9 p.

Research output: Contribution to journalArticle

32 Citations (Scopus)

Producing Automotive Parts Using an Environmentally Friendly P/M Process

Fujiki, A., kojima, H. & aizawa, T., 2001 Oct 2, In : Journal of Advanced Science. 13, p. 353-355

Research output: Contribution to journalArticle

Production of automotive parts using an environmentally friendly P/M(powder metallurgy)

Fujiki, A., Kojima, H. & Aizawa, T., 2001 Oct 3, In : Journal of Advanced Science. 13, p. 353-355

Research output: Contribution to journalArticle

2000

Development of high fatigue strength powder for high stress parts

yoshida, M., tanaka, H., aoki, T., hasegawa, Y. & Fujiki, A., 2000 Nov 15, In : Default journal. 1, p. 141-144

Research output: Contribution to journalArticle

Isotropic Bulk Exchange -Spring Magnets with 134kJ/m3 Prepared by Spark Plasma Sintering Method

ono, H., norihisa, W., shimada, M., sugiyama, T., yamamoto, H. & Fujiki, A., 2000 Nov 12, In : IEEE TRANSACTION ON MAGNETICS. 37, p. 2552-2554

Research output: Contribution to journalArticle

Magnetic properties on bulk exchange-spring magnets in Nd-Fe-Co-V-B system formed by Spark Plasma Sintering

Ono, H., Shimada, M., Fujiki, A., Yamamoto, H., Sonoda, M. & Tani, M., 2000 Jun, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 47, 6, p. 667-673 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Present state and future prospects of P/M parts for automotive applications

Fujiki, A., 2000 Feb 10, In : Materials Chemistry and Physics. p. 298-306

Research output: Contribution to journalArticle