• 235 Citations
  • 8 h-Index
1988 …2018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 235 Citations
  • 8 h-Index
  • 66 Article
  • 3 Conference contribution
  • 3 Conference article
Conference contribution

New PM parts for VVEL (variable valve event and lift system)

Kawase, K., Abe, T., Tsuruta, S., Kaminaga, T., Akasaka, Y., Yamada, Y. & Fujiki, A., 2010 Jan 1, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), (Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of elastic moduli of sintered low alloy steels by acoustic pulse method

Hirose, N., Oouchi, K., Fujiki, A. & Asami, J., 2007 Dec 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. p. 749-752 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The development of a cobalt-free exhaust valve seat insert

Fujitsuka, H., Kawata, H., Oyanagi, M., Miyazawa, T. & Fujiki, A., 2004 Jan 1, 2004 SAE World Congress. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
Conference article

Isotropic bulk exchange-spring magnets with 134 kJ/m3 prepared by spark plasma sintering method

Ono, H., Waki, N., Shimada, M., Sugiyama, T., Fujiki, A., Yamamoto, H. & Tani, M., 2001 Jul, In : IEEE Transactions on Magnetics. 37, 4 I, p. 2552-2554 3 p.

Research output: Contribution to journalConference article

37 Citations (Scopus)

New PM valve seat insert materials for high performance engines

Fujiki, A. & Kano, M., 1992 Jan 1, In : SAE Technical Papers.

Research output: Contribution to journalConference article

10 Citations (Scopus)

Sinter diffusion bonded idler sprocket of automotive engine

Fujiki, A., Kishi, Y., Ogura, M., Asaka, K. & Uemura, T., 1995 Jan 1, In : SAE Technical Papers.

Research output: Contribution to journalConference article

4 Citations (Scopus)
Article
3 Citations (Scopus)
1 Citation (Scopus)
1 Citation (Scopus)

Characteristics of P/M Mo Steel for Valve Seat Inserts

Fujiki, A. & Ishibashi, A., 1993 Jan 1, In : Journal of the Japan Society of Powder and Powder Metallurgy. 40, 6, p. 585-588 4 p.

Research output: Contribution to journalArticle

Open Access

Comparing Compressive and Tensile strength of Sintered Steels for Automotive Parts

Fujiki, A., Yoshida, A. & uHirose, N., 2012 Oct 17, In : PM2012 CD. 1, p. 1-5

Research output: Contribution to journalArticle

Developed new PM parts for new variable valve event and lift (VVEL) system in new engines

Fujiki, A., Yamada, Y., Tsuruta, S., Abe, T. & Kawase, K., 2009 Feb 1, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 56, 2, p. 82-84 3 p.

Research output: Contribution to journalArticle

Development of cobalt -free exhaust valve seat insert material for automotive engines

Fujiki, A., oyanagi, M., miyazawa, T., kawata, H., hayashi, K. & fujitsuka, H., 2003 Oct 9, In : Trans. of the Material Reserch Soc. of Japan. 29, p. 1861-1866

Research output: Contribution to journalArticle

Development of Co-free exhaust valve seat insert for automotive engines

Fujiki, A., Miyazawa, T., Oyanagi, M., Fujitsuka, H. & Kawata, H., 2006 Feb 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 24, 1, p. 18-23 6 p.

Research output: Contribution to journalArticle

Development of high fatigue strength powder for high stress parts

yoshida, M., tanaka, H., aoki, T., hasegawa, Y. & Fujiki, A., 2000 Nov 15, In : Default journal. 1, p. 141-144

Research output: Contribution to journalArticle

Development of under-cut shape sprocket forming by CNC press

Hirao, T., Fujiki, A., Saitou, M., Umegaki, S. & Katagiri, T., 1999 May, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 46, 5, p. 548-553 6 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Development of warm compacted and high temperature sintered P/M sprockets for silent chain system of DIG (Direct Injection Gasoline) automotive engines

Fujiki, A., Maekawa, Y., Mabuchi, Y., Watanabe, T., Sugaya, Y., Iwakiri, M. & Sibano, T., 2002 May, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 49, 5, p. 438-443 6 p.

Research output: Contribution to journalArticle

Open Access

Development of warm compacted P/M sprockets for automotive engines

Fujiki, A., Kojima, H., Maekawa, Y., Yamaguchi, M., Murata, T., Sugaya, Y., Iwakiri, M. & Shibano, T., 2003 Feb 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 21, 1, p. 14-18 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access

EFFECT OF THE EGR SYSTEM ON VALVE TRAIN WEAR IN DIESEL ENGINE.

Kano, M., Tanimoto, I., Nakamura, K. & Fujiki, A., 1988 Jan 1, In : Journal of JSLE. International edition. 9, p. 133-138 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Environmentally benign manufacturing of automotive parts via powder metallurgy

Fujiki, A., Kojima, H. & Aizawa, T., 2002 Mar, In : Materials Transactions. 43, 3, p. 348-351 4 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Environmentally Friendly P/M Parts and Process for Automotive Applications

Fujiki, A. & Minagawa, K., 2003 Oct 8, In : Trans. of the Material Reserch Soc. of Japan. 29, p. 2219-2220

Research output: Contribution to journalArticle

Flower-like BiVO4 microspheres and their visible light-driven photocatalytic activity

Zulkifili, A. N., Fujiki, A. & Kimijima, S., 2018 Jan 31, In : Applied Sciences (Switzerland). 8, 2, 216.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Heat and Wear Resistant Ferrous PM materials for High -performance Engine

Fujiki, A., kano, M. & izawa, K., 1993 Nov 17, In : Default journal. p. 156-159

Research output: Contribution to journalArticle

4 Citations (Scopus)
36 Citations (Scopus)
Open Access
3 Citations (Scopus)

Impact wear characteristics of engine valve and valve seat insert materials at high temperature

takeo, O., yahata, N., ehira, A. & Fujiki, A., 1995 Jun 14, In : Wear. p. 175-184

Research output: Contribution to journalArticle

36 Citations (Scopus)

Influences of Alloy Elements in Infiltrant on Mechanical Properties of Copper-alloy Infiltrated P/M High Speed Steels

Fujiki, A., Arita, M., Nojiri, W. & Watanabe, T., 1990 Jan 1, In : Journal of the Japan Society of Powder and Powder Metallurgy. 37, 2, p. 214-218 5 p.

Research output: Contribution to journalArticle

Open Access

Investigation of high saturation magnetization of low rare-earth content α-Fe/Nd2Fe14B bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2003 Apr 1, In : Journal of Applied Physics. 93, 7, p. 4060-4065 6 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Investigation of high saturation magnetization of low rare-earth content α-Fe-/Nd2Fe14B bulk exchange-spring magnets

H.ono, H. O., T.Tayu, T. T., Waki, N., T.Sugaya, T. S., M.Shimada, M. S., M.Kanou, M. K., H.Yamamoto, H. Y., K.Takasugi, K. T., Tani, M. & Fujiki, A., 2003 Apr 1, In : Journal of Applied Physics. 93, p. 4060-4065

Research output: Contribution to journalArticle

6 Citations (Scopus)

Isotropic Bulk Exchange -Spring Magnets with 134kJ/m3 Prepared by Spark Plasma Sintering Method

ono, H., norihisa, W., shimada, M., sugiyama, T., yamamoto, H. & Fujiki, A., 2000 Nov 12, In : IEEE TRANSACTION ON MAGNETICS. 37, p. 2552-2554

Research output: Contribution to journalArticle

Japanese automotive PM faces up to the competition

Fujiki, A., 1998 Jan, In : Metal Powder Report. 53, 1, p. 30-33 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Magnetic properties of low rare-earth content (Nd = 2 - 7 at.%) α-Fe/Nd2Fe14B type bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2002 Feb, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 49, 2, p. 141-145 5 p.

Research output: Contribution to journalArticle

Open Access

Magnetic properties on bulk exchange-spring magnets in Nd-Fe-Co-V-B system formed by Spark Plasma Sintering

Ono, H., Shimada, M., Fujiki, A., Yamamoto, H., Sonoda, M. & Tani, M., 2000 Jun, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 47, 6, p. 667-673 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Mechanical Properties of PN Steels Dispersed with High Speed Steel Powder Particles

Fujiki, A., Tanimoto, I., Ishibashi, A. & Takemura, K., 1991, In : Journal of the Japan Society of Powder and Powder Metallurgy. 38, 1, p. 27-30 4 p.

Research output: Contribution to journalArticle

Open Access
Open Access
2 Citations (Scopus)

New P/M Valve Seat Insert Materials for High Performance Engines

Fujiki, A. & kano, M., 1992 Feb 20, In : Default journal. 920570

Research output: Contribution to journalArticle

New PM partsfor VVEL(variable valve event and lift system)

Kawase, K., Abe, T., Tsuruta, S., Kaminaga, T., Akasaka, Y., Yamada, Y. & Fujiki, A., 2010 Oct 11, In : 2010 PM World Congress Proceeding. CD

Research output: Contribution to journalArticle

Poisson's ratio of sintered materials for structural machine parts

Norimitsu, H., Junichi, A., Akira, F. & Kazuya, O., 2009 Jun 1, In : Fenmo Yejin Jishu/Powder Metallurgy Technology. 27, 3, p. 226-232 7 p.

Research output: Contribution to journalArticle

Poisson's ratio of sintered materials for structural machine parts

Hirose, N., Asami, J., Fujiki, A. & Oouchi, K., 2004 Jul, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 51, 7, p. 515-521 7 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Poisson's Ratio of Sintered Materials for Structural Machine Parts Ist report from JPMA Machine Parts Committee

hirose, N., junnichi, A. & Fujiki, K. OA., 2004 Oct 20, In : Default journal.

Research output: Contribution to journalArticle

Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels

Hirose, N., Tanaka, S. I., Fujiki, A. & Asami, J., 2006 Jan, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 53, 1, p. 31-35 5 p.

Research output: Contribution to journalArticle

Open Access