Akito Takasaki

Research output

Research output per year 1986 2021

• 1443 Citations
• 20 h-Index
• 167 Article
• 4 Conference article
• 3 Conference contribution
• 2 Chapter
• 1 More
  • 1 Paper

Research output per year

Research output per year

Search results

• 2021

  Hydrogen Absorbability Improvement of Ti-based Quasicrystal with Magnesium Powder Synthesized by Mechanical Alloying Process

  Varagul, J., Phongsirimethi, N., Siwadamrongpong, S., Takasaki, A., Uematsu, S. & Klimkowicz, A., 2021, In: Suranaree Journal of Science and Technology. 28, 1, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnesium powder
  • Quasicrystals
  • Mechanical alloying
  • Hydrogen
  • Hydrogen storage
• 2020

  EFFECT of TiO 2 + Nb 2 O 5 + TiH 2 CATALYSTS on HYDROGEN STORAGE PROPERTIES of MAGNESIUM HYDRIDE

  Lobo, N., Klimkowicz, A. & Takasaki, A., 2020, In: MRS Advances. 5, 20, p. 1059-1069 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydrogen
  • hydrogen
  • Hydrogen storage
  • Catalysts
  • Hydrides

• Oxygen separation from air by the combined temperature swing and pressure swing processes using oxygen storage materials Y_1−x(Tb/Ce) _xMnO_3+δ

  Klimkowicz, A., Hashizume, T., Cichy, K., Tamura, S., Świerczek, K., Takasaki, A., Motohashi, T. & Dabrowski, B., 2020 Nov 1, In: Journal of Materials Science. 55, 33, p. 15653-15666 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Oxygen
  • Air
  • Temperature
  • Partial pressure
  • Oxygen Compounds
  1 Citation (Scopus)

• Quaternary Quasicrystal Alloys for Hydrogen Storage Technology

  Azuha, A. A., Klimkowicz, A. & Takasaki, A., 2020, In: MRS Advances. 5, 20, p. 1071-1083 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Quasicrystals
  • quaternary alloys
  • Hydrogen storage
  • Dehydrogenation
  • dehydrogenation
  1 Citation (Scopus)
• 2019

  Assessment of Dynamic Young’s Modulus and Damping Ratio of Bamboo Fiber Reinforced Polymer Composites using Shock Wave

  Yamamoto, K., Takasaki, A. & Hosoya, N., 2019, Mechanisms and Machine Science. Springer Netherlands, p. 4217-4226 10 p. (Mechanisms and Machine Science; vol. 73).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Bamboo
  • Shock waves
  • Elastic moduli
  • Damping
  • Polymers

• Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites

  Ly, E. B., Lette, M. J., Diallo, A. K., Gassama, A., Takasaki, A. & Ndiaye, D., 2019 May 1, In: Fibers and Polymers. 20, 5, p. 1046-1053 8 p.

  Research output: Contribution to journal › Article › peer-review

  • phenol-formaldehyde resin
  • Phenolic resins
  • Fillers
  • Fibers
  • Mechanical properties
  2 Citations (Scopus)

• Effects of KNbO ₃ catalyst on hydrogen sorption kinetics of MgH ₂

  Abdul Rahman, M. H., Shamsudin, M. A., Klimkowicz, A., Uematsu, S. & Takasaki, A., 2019 Jan 1, In: International Journal of Hydrogen Energy.

  Research output: Contribution to journal › Article › peer-review

  • Sorption
  • sorption
  • catalysts
  • Desorption
  • Catalysts
  7 Citations (Scopus)

• Properties of niti shape memory alloy micro-foils obtained by pulsed-current sintering of ni/ti foils

  Prendota, W., Goc, K., Strączek, T., Yamada, E., Takasaki, A., Przewoźnik, J., Radziszewska, A., Uematsu, S. & Kapusta, C., 2019 Mar, In: Metals. 9, 3, 323.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • titanium nickelide
  • Shape memory effect
  • Metal foil
  • Intermetallics
  • Sintering

• Relation between flange fracture and blankholder force in the process of cylindrical deep drawing of AZ31B rolled magnesium alloy sheets

  Okawa, M., Mori, S., Murakami, T. & Takasaki, A., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 2, p. 113-119 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Deep drawing
  • Magnesium alloys
  • Flanges
  • Buckling

• Reversible oxygen intercalation in hexagonal Y _0.7 Tb _0.3 MnO _{3+: δ} : toward oxygen production by temperature-swing absorption in air

  Klimkowicz, A., Cichy, K., Chmaissem, O., Dabrowski, B., Poudel, B., Świerczek, K., Taddei, K. M. & Takasaki, A., 2019, In: Journal of Materials Chemistry A. 7, 6, p. 2608-2618 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Intercalation
  • Oxygen
  • Air
  • Temperature
  • Sol-gels
  9 Citations (Scopus)

• Stability investigation of the γ-MgH ₂ phase synthesized by high-energy ball milling

  Lobo, N., Takasaki, A., Mineo, K., Klimkowicz, A. & Goc, K., 2019 Jan 1, In: International Journal of Hydrogen Energy.

  Research output: Contribution to journal › Article › peer-review

  • Ball milling
  • Crystal structure
  • balls
  • Hydrogen storage
  • Hydrogenation
  4 Citations (Scopus)
• 2018

  High discharge capacities of Ti-based quasicrystal electrodes synthesized by mechanical alloying

  Patrick, D. K., Takasaki, A. & Klimkowicz, A., 2018 Jan 1, In: MRS Advances. 3, 38, p. 2271-2279 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Quasicrystals
  • Mechanical alloying
  • alloying
  • Hydrogen
  • Electrodes

• Improvement of oxygen storage properties of hexagonal YMnO_3+δ by microstructural modifications

  Klimkowicz, A., Świerczek, K., Kobayashi, S., Takasaki, A., Allahyani, W. & Dabrowski, B., 2018 Feb, In: Journal of Solid State Chemistry. 258, p. 471-476 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Oxygen
  • oxygen
  • Rare earth elements
  • Sol-gels
  • X ray diffraction
  6 Citations (Scopus)

• Influence of carbon addition to Fe-Mn-Si type alloy on the structure and shape memory effect

  Prendota, W., Goc, K., Miyazawa, S., Takasaki, A., Rybicki, D. & Kapusta, C., 2018, In: Advances in Materials Science and Engineering. 2018, 6950876.

  Research output: Contribution to journal › Article › peer-review

  • Shape memory effect
  • Carbon
  • Mechanical alloying
  • Annealing
  • Diffraction patterns

• Magnetron sputtering as a method for introducing catalytic elements to magnesium hydride

  Goc, K., Prendota, W., Przewoźnik, J., Gondek, Kapusta, C., Radziszewska, A., Mineo, K. & Takasaki, A., 2018 Nov 8, In: International Journal of Hydrogen Energy. 43, 45, p. 20836-20842 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnetron sputtering
  • Hydrides
  • Magnesium
  • hydrides
  • magnesium
  1 Citation (Scopus)
• 2017

  On magnetism in the quasicrystalline Ti₄₅Zr₃₈Ni₁₇ alloy

  Czub, J., Przewoźnik, J., Żywczak, A., Takasaki, A., Hoser, A. & Gondek, 2017 Aug 15, In: Journal of Non-Crystalline Solids. 470, p. 108-111 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnetism
  • Quasicrystals
  • Neutron scattering
  • Neutron diffraction
  • Rare earths

• Oxygen release from BaLnMn₂O₆ (Ln: Pr, Nd, Y) under reducing conditions as studied by neutron diffraction

  Klimkowicz, A., Świerczek, K., Zheng, K., Wallacher, D. & Takasaki, A., 2017 Jun 1, In: Journal of Materials Science. 52, 11, p. 6476-6485 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Oxygen
  • Oxygen vacancies
  • Surface reactions
  • Positive ions
  8 Citations (Scopus)

• Oxygen storage properties of hexagonal HoMnO_{3+: δ}

  Świerczek, K., Klimkowicz, A., Nishihara, K., Kobayashi, S., Takasaki, A., Alanizy, M., Kolesnik, S., Dabrowski, B., Seong, S. & Kang, J., 2017, In: Physical Chemistry Chemical Physics. 19, 29, p. 19243-19251 9 p.

  Research output: Contribution to journal › Article › peer-review

  • manganite
  • Oxygen
  • oxygen
  • Phase transitions
  • perovskite
  6 Citations (Scopus)
• 2016

  Enhancement of the oxygen storage properties of BaPrMn₂O_5 + δ and BaSmMn₂O_5 + δ oxides by a high-energy milling

  Klimkowicz, A., Świerczek, K., Yamazaki, T. & Takasaki, A., 2016 Dec 15, In: Solid State Ionics. 298, p. 66-72 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Mechanical alloying
  • Oxides
  • Oxygen
  • oxides
  • augmentation
  10 Citations (Scopus)

• Oxygen storage properties and catalytic activity of layer-ordered perovskites BaY_{1 - X}Gd_xMn₂O_{5 + δ}

  Klimkowicz, A., Świerczek, K., Rzasa, T., Takasaki, A. & Dabrowski, B., 2016 May, In: Solid State Ionics. 288, p. 43-47 5 p.

  Research output: Contribution to journal › Article › peer-review

  • perovskite
  • Perovskite
  • catalytic activity
  • Catalyst activity
  • perovskites
  8 Citations (Scopus)
• 2015

  Amorphous hydrides of the Ti₄₅Zr₃₈Ni_17-xCo_x nano-powders

  Zywczak, A., Rusinek, D., Czub, J., Sikora, M., Stępień, J., Gondek, Takasaki, A. & Hoser, A., 2015 Dec 7, In: International Journal of Hydrogen Energy. 40, 45, p. 15534-15539 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydrides
  • hydrides
  • Powders
  • hydrogen
  • cobalt
  2 Citations (Scopus)

• Chemical diffusion and surface exchange in selected Ln-Ba-Sr-Co-Fe perovskite-type oxides

  Zheng, K., Klimkowicz, A., ͆wierczek, K., Malik, A., Ariga, Y., Tominaga, T. & Takasaki, A., 2015 Aug 11, In: Journal of Alloys and Compounds. 645, S1, p. S357-S360 32843.

  Research output: Contribution to journal › Article › peer-review

  • perovskite
  • Perovskite
  • Oxides
  • Electric Conductivity
  • Oxygen
  6 Citations (Scopus)

• Crystal structure and oxygen storage properties of BaLnMn₂O_5+δ (Ln: Pr, Nd, Sm, Gd, Dy, Er and Y) oxides

  Klimkowicz, A., ͆wierczek, K., Takasaki, A., Molenda, J. & Dabrowski, B., 2015 May, In: Materials Research Bulletin. 65, p. 116-122 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Crystal structure
  • Oxides
  • Oxygen
  • crystal structure
  • Rietveld analysis
  30 Citations (Scopus)

• Electrochemical properties of Ti₄₉Zr₂₆Ni_25-xPd_x (x = 0-6) quasicrystal electrodes produced by mechanical alloying

  Ariga, Y., Takasaki, A., Kimijima, T. & ͆wierczek, K., 2015 Aug 11, In: Journal of Alloys and Compounds. 645, S1, p. S152-S154 33164.

  Research output: Contribution to journal › Article › peer-review

  • Quasicrystals
  • Electrochemical properties
  • Mechanical alloying
  • Electrodes
  • Powders
  12 Citations (Scopus)

• HREM observation and high-pressure composition isotherm measurement of Ti₄₅Zr₃₈Ni₁₇ quasicrystal powders synthesized by mechanical alloying

  Tominaga, T., Takasaki, A., Shibato, T. & ͆wierczek, K., 2015 Aug 11, In: Journal of Alloys and Compounds. 645, S1, p. S292-S294 32989.

  Research output: Contribution to journal › Article › peer-review

  • High resolution electron microscopy
  • Quasicrystals
  • Mechanical alloying
  • Isotherms
  • Powders
  4 Citations (Scopus)

• Hydrogen desorption properties of magnesium hydride catalyzed multiply with carbon and silicon

  Klimkowicz, A., Takasaki, A., Gondek, Ł., Figiel, H. & ͆wierczek, K., 2015 Aug 11, In: Journal of Alloys and Compounds. 645, S1, p. S80-S83 33242.

  Research output: Contribution to journal › Article › peer-review

  • Hydrides
  • Silicon
  • Desorption
  • Hydrogen
  • Magnesium
  5 Citations (Scopus)

• Icosahedral hydrides of the Ti₄₅Zr₃₈Ni_17-xCo_x nano-powders

  Zywczak, A., Rusinek, D., Czub, J., Sikora, M., Stepień, J., Gondek, Gajewska, M., Takasaki, A. & Hoser, A., 2015 Oct 9, In: Journal of Alloys and Compounds. 656, p. 702-706 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydrides
  • Hydrogen
  • Powders
  • Extended X ray absorption fine structure spectroscopy
  • Thermal desorption spectroscopy

• Structural phase transitions in the Ti₄₅Zr₃₈Ni_17-xFe_x nano-alloys and their deuterides

  Rusinek, D., Czub, J., Niewolski, J., Gondek, Gajewska, M., Takasaki, A., Hoser, A. & Zywczak, A., 2015 Jun 24, In: Journal of Alloys and Compounds. 646, p. 90-95 6 p., 34361.

  Research output: Contribution to journal › Article › peer-review

  • Phase transitions
  • Deuterium
  • Quasicrystals
  • Neutron diffraction
  • Hydrogen storage
  1 Citation (Scopus)
• 2014

  Evaluation of BaY_{1 - X}Pr_xMn₂O _{5 + δ} oxides for oxygen storage technology

  Klimkowicz, A., Świerczek, K., Zheng, K., Baranowska, M., Takasaki, A. & Dabrowski, B., 2014 Sep 1, In: Solid State Ionics. 262, p. 659-663 5 p.

  Research output: Contribution to journal › Article › peer-review

  • perovskite
  • Perovskite
  • Crystal structure
  • Oxides
  • Oxidation
  16 Citations (Scopus)

• Oxygen storage capability in Co- and Fe-containing perovskite-type oxides

  Klimkowicz, A., Świerczek, K., Takasaki, A. & Dabrowski, B., 2014 Apr 1, In: Solid State Ionics. 257, p. 23-28 6 p.

  Research output: Contribution to journal › Article › peer-review

  • perovskite
  • Perovskite
  • Oxides
  • Oxidation
  • perovskites
  10 Citations (Scopus)

• Oxygen storage-related properties of substituted BaLnMn ₂ O ₅+δ A-site ordered manganites

  Swierczek, K., Klimkowicz, A., Niemczyk, A., Olszewska, A., Rząsa, T., Molenda, J. & Takasaki, A., 2014 Dec 16, In: Functional Materials Letters. 7, 6, 1440004.

  Research output: Contribution to journal › Article › peer-review

  • manganite
  • Manganites
  • Positive ions
  • Cations
  • Oxygen
  7 Citations (Scopus)

• Synthesis and characterization of Fe-Mn-Si shape memory alloy by mechanical alloying and subsequent sintering

  Saito, T., Kapusta, C. & Takasaki, A., 2014 Jan 13, In: Materials Science and Engineering A. 592, p. 88-94 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Mechanical alloying
  • Shape memory effect
  • shape memory alloys
  • Sintering
  • alloying
  19 Citations (Scopus)
• 2013

  Ab initio study of the role of niobium oxides as catalysts in magnesium hydride

  Kobayashi, T. & Takasaki, A., 2013 May 20, In: Journal of Alloys and Compounds. 580, SUPPL1, p. S229-S232

  Research output: Contribution to journal › Article › peer-review

  • Niobium oxide
  • Hydrides
  • Magnesium
  • Adsorption
  • Bond length
  4 Citations (Scopus)

• Effect of mechanical milling on electrochemical properties of Ti ₄₅Zr_38xNi_17+x (x = 0, 8) quasicrystals produced by rapid-quenching

  Baster, D., Takasaki, A., Kuroda, C., Hanc, E., Lee, S. H., Świerczek, K., Szmyd, J. S., Kim, J. Y. & Molenda, J., 2013, In: Journal of Alloys and Compounds. 580, SUPPL1, p. S238-S242

  Research output: Contribution to journal › Article › peer-review

  • Rapid quenching
  • Quasicrystals
  • Electrochemical properties
  • Electrodes
  • Hydrides
  15 Citations (Scopus)

• Electrochemical properties of Ti_45-xZr _30+xNi₂₅ (x = -4, 0, 4) quasicrystal and amorphous electrodes produced by mechanical alloying

  Ariga, Y., Takasaki, A., Kuroda, C. & Kulka, A., 2013, In: Journal of Alloys and Compounds. 580, SUPPL1, p. S251-S254

  Research output: Contribution to journal › Article › peer-review

  • Quasicrystals
  • Electrochemical properties
  • Mechanical alloying
  • Electrodes
  • Powders
  10 Citations (Scopus)

• Hydrogen storage characteristics of Ti₄₅Zr₃₈Ni _17-xCo_x (x = 4, 8) alloy and quasicrystal powders produced by mechanical alloying

  Takasaki, A., Zywczak, A., Gondek & Figiel, H., 2013 Apr 10, In: Journal of Alloys and Compounds. 580, SUPPL1, p. S216-S218

  Research output: Contribution to journal › Article › peer-review

  • Quasicrystals
  • Mechanical alloying
  • Hydrogen storage
  • Hydrogen
  • Powders
  14 Citations (Scopus)
• 2012

  Hydrogen adsorption by woodceramics produced from biomass

  Akito, T., Suguru, I., Tomoka, Y. & Toshio, O., 2012 Jun 1, In: Journal of Shanghai Jiaotong University (Science). 17, 3, p. 330-333 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Adsorption
  • Biomass
  • Hydrogen
  • Phenolic resins
  • Impregnation
  6 Citations (Scopus)
• 2011

  Current Status and Application of Woodceramics Made from Biomass

  Okabe, T., Kakishita, K., Shimizu, H., Nishimoto, Y., Takasaki, A., Suda, T., Fushitani, M., Togawa, H., Sato, M. & Yamamoto, R., 2011 Nov 23, In: , Proceedings of the Intl. Conf. on Ecomaterials (ICEM-10), Nov. 21-24 Shanghai, China. p. 127-133

  Research output: Contribution to journal › Article › peer-review

• Current status and future prospects of biocomposites IV: Biocomposites made from carbonization of biomas - Current status and future prospects of woodceramics

  Okabe, T., Kakishita, K., Shimizu, H., Nishimoto, Y., Takasaki, A., Suda, T., Fushitani, M. & Yamamoto, R., 2011 Feb, In: Zairyo/Journal of the Society of Materials Science, Japan. 60, 2, p. 175-181 7 p.

  Research output: Contribution to journal › Article › peer-review

• Electrochemical properties of Ti₄₅Zr_38-xNi _17+x (0 ≤ x ≤ 8) quasicrystals produced by rapid-quenching

  Takasaki, A., Kuroda, C., Lee, S. H. & Kim, J. Y., 2011 Sep, In: Journal of Alloys and Compounds. 509, SUPPL. 2, p. S782-S785

  Research output: Contribution to journal › Article › peer-review

  • Rapid quenching
  • Quasicrystals
  • Electrochemical properties
  • Substitution reactions
  • Phase structure
  5 Citations (Scopus)

• Electrochemical Properties of Ti45Zr38-xNi17+x (0｡ﾜx ｡ﾜ8) Quasicrystals Produced by Rapid-Quenching

  A.Takasaki, A. T., Kuroda, C., Lee, S-H., Kim, J-Y. & Takasaki, A., 2011 Sep 1, In: Journal of Alloys and Compounds. 509, p. S782-S785

  Research output: Contribution to journal › Article › peer-review

  88 Citations (Scopus)

• Hydrogen Adsorption Isotherms for Woodceramics after Acid and Alkaline Treatment

  S.Iijima, S. I., A.Takasaki, A. T., Yamane, T., T.Okabe, T. O. & Takasaki, A., 2011 Dec 1, In: MRS-J Academic Symposium Abstract CD.

  Research output: Contribution to journal › Article › peer-review

• Hydrogenation of TiNi shape memory alloy produced by mechanical alloying

  Saito, T., Yokoyama, T. & Takasaki, A., 2011 Sep 1, In: Journal of Alloys and Compounds. 509, SUPPL. 2, p. S779-S781

  Research output: Contribution to journal › Article › peer-review

  • Mechanical alloying
  • Hydrogenation
  • Hydrogen
  • Shape memory effect
  • Martensitic transformations
  13 Citations (Scopus)

• Hydrogen storage in Ti-Zr/Hf-Ni quasicrystal and related crystal powders synthesized by mechanical alloying

  Takasaki, A. & Kelton, K. F., 2011 Dec 1, Quasicrystals: Types, Systems, and Techniques. Nova Science Publishers, Inc., p. 127-146 20 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • alloying
  • hydrogen
  • annealing
  • hydrogenation
  • crystals

• Structural and hyperfine properties of Ti₄₈Zr₇Fe ₁₈ nano-compounds and its hydrides

  Ywczak, A., Gondek, L., Figiel, H., Ukrowski, J., Czub, J. & Takasaki, A., 2011 Mar 3, In: Journal of Alloys and Compounds. 509, 9, p. 3952-3957 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydrides
  • Hydrogen
  • Structural properties
  • Mechanical alloying
  • Thermal desorption spectroscopy
  5 Citations (Scopus)

• Structure and hyperfine properties of Ti48Zr7Fe18 and its hydrides

  Zywczak, A., Gondek, N. V., Figiel, H., ?ukrowski, J., Czub, J. & Takasaki, A., 2011 Mar 1, In: Journal of Alloys and Compounds. 509, p. 3952-3957

  Research output: Contribution to journal › Article › peer-review

• The effect of Substrate Surface Roughness on the Mechanical Properties od DLC Film Deposited by RF Magnetron Sputter Ion Plating from Woodceramics as Target

  Kaewdook, D., Takasaki, A. & Okabe, T., 2011 Oct 1, In: Proc. 2nd TSME Intel. Conf. on Mechanical Engineering, 19-21 October, 2011, Krabi, Thailand.

  Research output: Contribution to journal › Article › peer-review
• 2010

  A Review on the Hydrogen Storage Systems for Fuel Cell Vehicles in Japan

  Takasaki, A., 2010 Jun 1, In: Jurnal Mekanikal (ISBN 0127-3396), An International Journal. p. 17-23

  Research output: Contribution to journal › Article › peer-review

• Effect of Substitution of Ni for Zr on the Electrochemical Propertoes of Ti-Zr-Ni Quasicrystals

  Okuyama, T., Kuroda, C. & Takasaki, A., 2010 Feb 16, In: , Proceedings, 4th South East Asia Technological University Consortium symposium. p. 328-338

  Research output: Contribution to journal › Article › peer-review

• Electrochemical Properties of Ti45Zr38Ni17 Quasicrystal and Amorphous Produced by Mechanical Alloying

  A.Takasaki, A. T., Zaj?c, W., Okuyama, T. & Takasaki, A., 2010 Apr 30, In: Transactions of Materials Research Society of Japan. 35, p. 405-408

  Research output: Contribution to journal › Article › peer-review