If you made any changes in Pure these will be visible here soon.

Research Output

Paper

Hydride dissociation and hydrogen evolution from cathodically charged gamma-based titanium aluminides

Takasaki, A., Furuya, Y., Ojima, K. & Taneda, Y., 1996 Jan 1, p. 799-807. 9 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)
Conference contribution

Synergetic effect of oxides on hydrogen reaction kinetics of magnesium hydride

Patah, A., Takasaki, A. & Szmyd, J. S., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1605-1608 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

The effect of Cr2O3/ZnO on hydrogen desorption properties of MgH2

Patah, A., Takasaki, A. & Szmyd, J. S., 2008 Dec 1, Solid-State Chemistry of Inorganic Materials VII. p. 190-195 6 p. (Materials Research Society Symposium Proceedings; vol. 1148).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Ti-based quasicrystal layers produced by plasma thermal spraying

Takasaki, A., Uematsu, S. & Kelton, K. F., 2007 Dec 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. p. 449-452 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
Conference article

Effect of surface on hydrogen permeation through pure aluminum

Furuya, Y., Takasaki, A., Koga, M. & Kino, T., 2000 Jan 1, In : Materials Science Forum. 331, p. II/-

Research output: Contribution to journalConference article

1 Citation (Scopus)

Hydrogenation of Ti-Zr-Ni quasicrystals synthesized by mechanical alloying

Takasaki, A., Huett, V. T. & Kelton, K. F., 2004 Mar 15, In : Journal of Non-Crystalline Solids. 334-335, p. 457-460 4 p.

Research output: Contribution to journalConference article

32 Citations (Scopus)

Hydrogen permeation through an Al-0.2 at% Mg alloy

Takasaki, A., Furuya, Y. & Kino, T., 2000 Jan 1, In : Materials Science Forum. 331, p. II/-

Research output: Contribution to journalConference article

1 Citation (Scopus)
6 Citations (Scopus)
Chapter

Assessment of Dynamic Young’s Modulus and Damping Ratio of Bamboo Fiber Reinforced Polymer Composites using Shock Wave

Yamamoto, K., Takasaki, A. & Hosoya, N., 2019 Jan 1, Mechanisms and Machine Science. Springer Netherlands, p. 4217-4226 10 p. (Mechanisms and Machine Science; vol. 73).

Research output: Chapter in Book/Report/Conference proceedingChapter

Hydrogen storage in Ti-Zr/Hf-Ni quasicrystal and related crystal powders synthesized by mechanical alloying

Takasaki, A. & Kelton, K. F., 2011 Dec 1, Quasicrystals: Types, Systems, and Techniques. Nova Science Publishers, Inc., p. 127-146 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Ab initio study of the role of niobium oxides as catalysts in magnesium hydride

Kobayashi, T. & Takasaki, A., 2013 May 20, In : Journal of Alloys and Compounds. 580, SUPPL1, p. S229-S232

Research output: Contribution to journalArticle

3 Citations (Scopus)

Amorphous hydrides of the Ti45Zr38Ni17-xCox nano-powders

Zywczak, A., Rusinek, D., Czub, J., Sikora, M., Stępień, J., Gondek, Takasaki, A. & Hoser, A., 2015 Dec 7, In : International Journal of Hydrogen Energy. 40, 45, p. 15534-15539 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

A process for copper film deposition by pyrolysis of organic copper materials

Homma, T., Takasaki, A., Yamaguchi, M., Kokubun, H. & Machida, H., 2000 Jan 1, In : Journal of the Electrochemical Society. 147, 2, p. 580-585 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Chemical diffusion and surface exchange in selected Ln-Ba-Sr-Co-Fe perovskite-type oxides

Zheng, K., Klimkowicz, A., ͆wierczek, K., Malik, A., Ariga, Y., Tominaga, T. & Takasaki, A., 2015 Aug 11, In : Journal of Alloys and Compounds. 645, S1, p. S357-S360 32843.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Crystal structure and oxygen storage properties of BaLnMn2O5+δ (Ln: Pr, Nd, Sm, Gd, Dy, Er and Y) oxides

Klimkowicz, A., ͆wierczek, K., Takasaki, A., Molenda, J. & Dabrowski, B., 2015 May, In : Materials Research Bulletin. 65, p. 116-122 7 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Current Status and Application of Woodceramics Made from Biomass

Okabe, T., Kakishita, K., Shimizu, H., Nishimoto, Y., Takasaki, A., Suda, T., Fushitani, M., Togawa, H., Sato, M. & Yamamoto, R., 2011 Nov 23, In : , Proceedings of the Intl. Conf. on Ecomaterials (ICEM-10), Nov. 21-24 Shanghai, China. p. 127-133

Research output: Contribution to journalArticle

Current status and future prospects of biocomposites IV: Biocomposites made from carbonization of biomas - Current status and future prospects of woodceramics

Okabe, T., Kakishita, K., Shimizu, H., Nishimoto, Y., Takasaki, A., Suda, T., Fushitani, M. & Yamamoto, R., 2011 Feb, In : Zairyo/Journal of the Society of Materials Science, Japan. 60, 2, p. 175-181 7 p.

Research output: Contribution to journalArticle

Development of Bean-Curd Refuse Origin Ceramics Materials

Kakuta, S., Ono, H., Kushibiki, M., Okabe, T., Degawa, H., Hatanaka, H., Iwamoto, Y., Ogawa, M., Takasaki, A. & Murakami, M., 2006 May 1, In : Transactions of Materials Reseasch Society of Japan. 31, p. 949-952

Research output: Contribution to journalArticle

Direct Observation of Transformation in Tin by Transmisson Electron Microscopy

K.OJIMA, K. OJIMA., Y.TANEDA, Y. TANEDA., A.TAKASAKI, A. TAKASAKI. & Takasaki, A., 1993 Sep 1, In : Physica Status Solidi (a). p. 139-1

Research output: Contribution to journalArticle

Direct observation of α → β transformation in tin by transmission electron microscopy

Ojima, K., Taneda, Y. & Takasaki, A., 1993 Sep 16, In : physica status solidi (a). 139, 1, p. 139-144 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effect of Cr2O3/ZnO on Hydrogen Desorption Properties of MgH2

A.Patha, A. P., A.Takasaki, A. T., J.S.Szmyd, J. S. S. & Takasaki, A., 2008 Dec 1, In : Abstract of Fall Meeting, Materials Research Society (Boston, MA). CD-ROM

Research output: Contribution to journalArticle

1 Citation (Scopus)

EFFECT OF DELTA FERRITE ON LOW TEMPERATURE TOUGHNESS OF TYPE 308L WELD METAL.

Onzawa, T., Takasaki, A., Harada, T. & Tamura, H., 1987 Nov 1, In : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 5, 4, p. 81-85 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effect of delta-ferrite on Low Temperature Toughness of Type 316L Austenitic Stainless Steel Weld Matals

H.TAMURA, H. TAMURA., T.ONZAWA, T. ONZAWA., A.TAKASAKI, A. TAKASAKI., T.TAKATORI, T. TAKATORI. & Takasaki, A., 1986 Apr 1, In : Tras.Japan Welding Society. p. 17-1

Research output: Contribution to journalArticle

Effect of mechanical milling on electrochemical properties of Ti 45Zr38xNi17+x (x = 0, 8) quasicrystals produced by rapid-quenching

Baster, D., Takasaki, A., Kuroda, C., Hanc, E., Lee, S. H., Świerczek, K., Szmyd, J. S., Kim, J. Y. & Molenda, J., 2013 Apr 23, In : Journal of Alloys and Compounds. 580, SUPPL1, p. S238-S242

Research output: Contribution to journalArticle

14 Citations (Scopus)
1 Citation (Scopus)
Open Access
2 Citations (Scopus)

Effect of Reinforcing Fillers and Fibres Treatment on Morphological and Mechanical Properties of Typha-Phenolic Resin Composites

Ly, E. B., Lette, M. J., Diallo, A. K., Gassama, A., Takasaki, A. & Ndiaye, D., 2019 May 1, In : Fibers and Polymers. 20, 5, p. 1046-1053 8 p.

Research output: Contribution to journalArticle

Effects of KNbO 3 catalyst on hydrogen sorption kinetics of MgH 2

Abdul Rahman, M. H., Shamsudin, M. A., Klimkowicz, A., Uematsu, S. & Takasaki, A., 2019 Jan 1, In : International Journal of Hydrogen Energy.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Electrochemical hydrogenation of Ti45Zr38Ni17 quasi crystal and amorphous powders produced by mechanical alloying

Takasaki, A., Zajc, W., Okuyama, T. & Szmyd, J. S., 2009 Jun 1, In : Journal of the Electrochemical Society. 156, 7, p. A521-A526

Research output: Contribution to journalArticle

11 Citations (Scopus)

Electrochemical properties of Ti<inf>49</inf>Zr<inf>26</inf>Ni<inf>25-x</inf>Pd<inf>x</inf> (x = 0-6) quasicrystal electrodes produced by mechanical alloying

Ariga, Y., Takasaki, A., Kimijima, T. & ͆wierczek, K., 2015 Aug 11, In : Journal of Alloys and Compounds. 645, S1, p. S152-S154 33164.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Electrochemical properties of Ti45-xZr 30+xNi25 (x = -4, 0, 4) quasicrystal and amorphous electrodes produced by mechanical alloying

Ariga, Y., Takasaki, A., Kuroda, C. & Kulka, A., 2013 Apr 29, In : Journal of Alloys and Compounds. 580, SUPPL1, p. S251-S254

Research output: Contribution to journalArticle

10 Citations (Scopus)

Electrochemical Properties of Ti45Zr38Ni17 Quasicrystal and Amorphous Produced by Mechanical Alloying

A.Takasaki, A. T., Zaj?c, W., Okuyama, T. & Takasaki, A., 2010 Apr 30, In : Transactions of Materials Research Society of Japan. 35, p. 405-408

Research output: Contribution to journalArticle

Electrochemical properties of Ti45Zr38-xNi 17+x (0 ≤ x ≤ 8) quasicrystals produced by rapid-quenching

Takasaki, A., Kuroda, C., Lee, S. H. & Kim, J. Y., 2011 Sep 1, In : Journal of Alloys and Compounds. 509, SUPPL. 2, p. S782-S785

Research output: Contribution to journalArticle

5 Citations (Scopus)

Electrochemical Properties of Ti45Zr38-xNi17+x (0。ワx 。ワ8) Quasicrystals Produced by Rapid-Quenching

A.Takasaki, A. T., Kuroda, C., Lee, S-H., Kim, J-Y. & Takasaki, A., 2011 Sep 1, In : Journal of Alloys and Compounds. 509, p. S782-S785

Research output: Contribution to journalArticle

85 Citations (Scopus)

Enhancement of the oxygen storage properties of BaPrMn2O5 + δ and BaSmMn2O5 + δ oxides by a high-energy milling

Klimkowicz, A., Świerczek, K., Yamazaki, T. & Takasaki, A., 2016 Dec 15, In : Solid State Ionics. 298, p. 66-72 7 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Evaluation of BaY1 - XPrxMn2O 5 + δ oxides for oxygen storage technology

Klimkowicz, A., Świerczek, K., Zheng, K., Baranowska, M., Takasaki, A. & Dabrowski, B., 2014 Sep 1, In : Solid State Ionics. 262, p. 659-663 5 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Examination of Supersonic Wave Soldering with Woodceramics Heater

Tsuji, J., Okabe, T., T.Suda, T. S. & Takasaki, A., 2009 Dec 1, In : Program and Abstract, 19th Materials Research Society of Japan, Academic Symposium. CD-ROM

Research output: Contribution to journalArticle

Fe-Mn-Si Alloy by Mechanical Alloying and Direct Current Sintering

Saito, T., Gaska, K., Takasaki, A. & Kapusuta, C., 2010 Jun 1, In : Jurnal Mekanikal (ISBN 0127-3396), An International Journal. p. 62-67

Research output: Contribution to journalArticle