Research Output 1985 2017

  • 92 Citations
  • 4 h-Index
  • 68 Article
  • 2 Conference contribution
  • 1 Chapter
2017

A study of dry drilling method on chromium molybdenum steel

Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I. 2017 In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.

Research output: Research - peer-reviewArticle

Molybdenum
Chromium
Drilling
Steel
Temperature
2016

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y. 2016 Aug 30 In : Biofabrication. 8, 3, 035016

Research output: Research - peer-reviewArticle

Scaffolds (biology)
Liver
Tissue
Fabrication
Scaffolds
2014
7 Citations

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T. 2014 Apr In : Precision Engineering. 38, 2, p. 365-370 6 p.

Research output: Research - peer-reviewArticle

Aluminum alloys
Diamonds
Machining
Carbon
Amorphous carbon
2012
Transcription
Machining
Mirrors
Resins
Acrylics
2011
2 Citations
Milling (machining)
Ball milling
Machine tools
8 Citations

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E. 2011 Advanced Materials Research. Vol. 188, p. 578-583 6 p. (Advanced Materials Research; vol. 188)

Research output: ResearchConference contribution

Machining
Alloy steel
Cast iron
Titanium alloys
Wear of materials
2010

Development of High- Acceletion and Ultra-Precision Linear Motor Driven Machining Center and its Characteristics

Nakamoto, K., Matsumoto, S. & Anzai, M. 2010 Sep 5 In : International Journal of Automation Technology. 4, p. 454-459

Research output: Research - peer-reviewArticle

Development of Inline Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M. 2010 Jan 1 In : International Journal of Automation Technology. 4, p. 9-14

Research output: Research - peer-reviewArticle

High speed machining: a review from a viewpoint of chip formation

Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M. 2010 Oct 9 In : Proceedings of the Fourth International Conference on High Speed Machining.

Research output: Research - peer-reviewArticle

2009
1 Citations

Proposal for artificial bone formation using powder-layered manufacturing: Surface and internal chemical composition of formed artificial bone

Yamazawa, K., Hashizume, D., Nakao, A., Anzai, M., Narahara, H. & Suzuki, H. 2009 In : Transactions of Japanese Society for Medical and Biological Engineering. 47, 4, p. 359-365 7 p.

Research output: Research - peer-reviewArticle

Layered manufacturing
Binders
Bone
Powders
Chemical analysis
1 Citations

Proposal for artificial bone formation using powder-layered manufacturing: Porous characteristics of forming bone

Yamazawa, K., Anzai, M., Yokota, H., Himeno, R., Suzuki, H. & Narahara, H. 2009 In : Transactions of Japanese Society for Medical and Biological Engineering. 47, 2, p. 142-147 6 p.

Research output: Research - peer-reviewArticle

Layered manufacturing
Bone
Powders
Binders
Liquids
2008
Machine tool drives
Linear motors
Machine tools
Machining
Specifications
Linear motors
Rails

The latest Rapid Prototyping Technology and application for Die & Mold

ANZAI, M. 2008 Jun 22 In : Default journal.

Research output: Research - peer-reviewArticle

Trial Forming of Artificial Bone by Inkjet-type Powder-layered Manufacturing

Yamazawa, K., Anzai, M., Himeno, R., Suzuki, H., Narahara, H. & Suzuki, S. 2008 Mar 1 In : International Journal of Automation Technology. Vol.2, p. 156-161

Research output: Research - peer-reviewArticle

2007

Development of Die Mold Processing Machine with Multi- Spindles and Axes

Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y. 2007 Feb 1 In : International Journal of Automation Technology. Vol.1, p. 94-102

Research output: Research - peer-reviewArticle

Latest Technology of High-speed milling, , (22June, 2007, Bangkok)

ANZAI, M. 2007 Jun 22 In : Default journal.

Research output: Research - peer-reviewArticle

2006
1 Citations
Machine tools
Metals
Processing
Molds
Cost reduction
1 Citations
Machine tools
Specifications
Linear motors
Rails

Latest Technology of High-speed milling

ANZAI, M. 2006 Jun 3 In : Default journal.

Research output: Research - peer-reviewArticle

2005
21 Citations

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M. 2005 Apr In : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

Research output: Research - peer-reviewArticle

Shape optimization
Milling (machining)
Computer aided manufacturing
Computer aided design
Machining

A Study on Nano-precision Combined Process of ELID Grinding and Magnetic Assisted Polishing on Optics Glass Material

LEE, Y-C., KWAK, T. S., OHMORI, H., ANZAI, M. & LIN, W. 2005 Feb 1 In : Default journal.

Research output: Research - peer-reviewArticle

Micro forming simulation techniques and its application

T., K., T., S., Y., U., W., L., H., O., M., A., Y., W., S., M., Y, L. & Anzai, M. 2005 Feb 1 In : Default journal.

Research output: Research - peer-reviewArticle

2004

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M. 2004 Jun 1 In : Default journal. June 17-19, p. 51-57

Research output: Research - peer-reviewArticle

2003
3 Citations
Milling (machining)
Fabrication
Grinding wheels
Computer aided manufacturing
Computer aided design
Milling (machining)
Machining
Stabilization
Fabrication
Cutting tools

Fundamental Properties of 3D Microfabrication Using a Femto-second Laser

Yamanoi, M., Wada, S., Anzai, M., Hitoshi Ohmori, O. & Makinouchi, A. 2003 Proceedings of SPIE - The International Society for Optical Engineering. Miyamoto, I., Ostendorf, A., Sugioka, K. & Helvajian, H. (eds.). Vol. 5063, p. 378-380 3 p.

Research output: ResearchConference contribution

Microfabrication
Lasers
Processing
lasers
Ultrashort pulses
2002

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M. 2002 Jan 1 In : Default journal.

Research output: Research - peer-reviewArticle

1 Citations

Fabrication of ball end mills for high speed milling and their cutting characteristics

Yi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M. 2002 Mar In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, p. 451 1 p.

Research output: Research - peer-reviewArticle

Milling (machining)
Fabrication
Machining
Grinding wheels
Computer aided manufacturing
2001
1 Citations

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M. 2001 In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

Research output: Research - peer-reviewArticle

Computer aided manufacturing

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M. 2001 May 1 In : Default journal. p. 205-208

Research output: Research - peer-reviewArticle

2000

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M. 2000 Jun 1 In : Default journal. (2000.6), p. 469-474

Research output: Research - peer-reviewArticle

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K. 2000 Jun 1 In : Default journal. (2000.6), p. 464-468

Research output: Research - peer-reviewArticle

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N. 2000 Jun 1 In : Default journal. (2000.6), p. 237-241

Research output: Research - peer-reviewArticle

1999

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N. 1999 Oct 1 In : Default journal. (1999.10), p. 647-650

Research output: Research - peer-reviewArticle

3 Citations

Development of Ultra High Speed Milling Machine using Reciprocating Layer Cutter Path

Takahashi, I., Anzai, M. & Nakagawa, T. 1999 In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 5, p. 714-718 5 p.

Research output: Research - peer-reviewArticle

Milling machines
Bearings (structural)
Machine tools
Air
Experiments
24 Citations

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M. 1999 Jun In : Computers in Industry. 39, 1, p. 27-33 7 p.

Research output: Research - peer-reviewArticle

Lamination
Metals
Sheet metal
Cooling
Milling
1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T. 1997 Jun 1 In : Default journal. (1997.6), p. 86-92

Research output: Research - peer-reviewArticle

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T. 1997 Jun 1 In : Default journal. (1997.6), p. 264-269

Research output: Research - peer-reviewArticle

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T. 1997 Jun 1 In : Default journal. (1997.6), p. 248-257

Research output: Research - peer-reviewArticle

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M. 1996 Jun 1 In : 韓国精密工学会誌. Vol.13, p. 59-65

Research output: Research - peer-reviewArticle

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T. 1996 Apr 1 In : RIKEN Review No.12. p. 19-20

Research output: Research - peer-reviewArticle

Magnetic abrasive automatic Polishing of curved surface, Focused on Experimental Equipments and Characterization

Anzai, M., Yoshida, T. & Nakagawa, T. 1996 Apr 1 In : RIKEN Review No.12. p. 15-16

Research output: Research - peer-reviewArticle

3 Citations

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T. 1996 In : International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

Research output: Research - peer-reviewArticle

Milling (machining)
Cutting tools
Productivity
Steel
Carbide tools

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T. 1996 Apr 1 In : International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

Research output: Research - peer-reviewArticle

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T. 1996 Apr 1 In : RIKEN Review No.12. p. 17-18

Research output: Research - peer-reviewArticle

Ultra High Speed Milling of Quenched Die Steel

Matsuoka, T., Takahashi, I., ANZAI, M., NAKAGAWA, T. & Takeoka, E. 1996 Sep 1 In : Default journal. (1996.9), p. 655-670

Research output: Research - peer-reviewArticle