• 256 Citations
  • 7 h-Index
1985 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2020
Open Access
2019

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 Sep 15, In : Biochemical Engineering Journal. 149, 107239.

Research output: Contribution to journalArticle

3 Citations (Scopus)
Open Access
1 Citation (Scopus)
2017

A study of dry drilling method on chromium molybdenum steel

Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I., 2017, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.

Research output: Contribution to journalArticle

2016

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 Aug 30, In : Biofabrication. 8, 3, 035016.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2014

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 Apr 1, In : Precision Engineering. 38, 2, p. 365-370 6 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)
2012
2010

Development of High- Acceletion and Ultra-Precision Linear Motor Driven Machining Center and its Characteristics

Nakamoto, K., Matsumoto, S. & Anzai, M., 2010 Sep 5, In : International Journal of Automation Technology. 4, p. 454-459

Research output: Contribution to journalArticle

Development of Inline Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2010 Jan 1, In : International Journal of Automation Technology. 4, p. 9-14

Research output: Contribution to journalArticle

High speed machining: a review from a viewpoint of chip formation

Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M., 2010 Oct 9, In : Proceedings of the Fourth International Conference on High Speed Machining.

Research output: Contribution to journalArticle

2009

Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology

Saijo, H., Igawa, K., Kanno, Y., Mori, Y., Kondo, K., Shimizu, K., Suzuki, S., Chikazu, D., Iino, M., Anzai, M., Sasaki, N., Chung, U. I. & Takato, T., 2009 Sep, In : Journal of Artificial Organs. 12, 3, p. 200-205 6 p.

Research output: Contribution to journalArticle

59 Citations (Scopus)

Proposal for artificial bone formation using powder-layered manufacturing: Surface and internal chemical composition of formed artificial bone

Yamazawa, K., Hashizume, D., Nakao, A., Anzai, M., Narahara, H. & Suzuki, H., 2009 Dec 1, In : Transactions of Japanese Society for Medical and Biological Engineering. 47, 4, p. 359-365 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2008
1 Citation (Scopus)
Open Access

The latest Rapid Prototyping Technology and application for Die & Mold

ANZAI, M., 2008 Jun 22, In : Default journal.

Research output: Contribution to journalArticle

Trial Forming of Artificial Bone by Inkjet-type Powder-layered Manufacturing

Yamazawa, K., Anzai, M., Himeno, R., Suzuki, H., Narahara, H. & Suzuki, S., 2008 Mar 1, In : International Journal of Automation Technology. Vol.2, p. 156-161

Research output: Contribution to journalArticle

2007

Development of Die Mold Processing Machine with Multi- Spindles and Axes

Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y., 2007 Feb 1, In : International Journal of Automation Technology. Vol.1, p. 94-102

Research output: Contribution to journalArticle

Latest Technology of High-speed milling, , (22June, 2007, Bangkok)

ANZAI, M., 2007 Jun 22, In : Default journal.

Research output: Contribution to journalArticle

2006

Latest Technology of High-speed milling

ANZAI, M., 2006 Jun 3, In : Default journal.

Research output: Contribution to journalArticle

Tailor-made tricalcium phosphate bone implant directly fabricated by a three-dimensional ink-jet printer

Igawa, K., Mochizuki, M., Sugimori, O., Shimizu, K., Yamazawa, K., Kawaguchi, H., Nakamura, K., Takato, T., Nishimura, R., Suzuki, S., Anzai, M., Chung, U. I. & Sasaki, N., 2006 Dec, In : Journal of Artificial Organs. 9, 4, p. 234-240 7 p.

Research output: Contribution to journalArticle

50 Citations (Scopus)
2005

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2005 Apr 1, In : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

A Study on Nano-precision Combined Process of ELID Grinding and Magnetic Assisted Polishing on Optics Glass Material

LEE, Y-C., KWAK, T. S., OHMORI, H., ANZAI, M. & LIN, W., 2005 Feb 1, In : Default journal.

Research output: Contribution to journalArticle

Micro forming simulation techniques and its application

T., K., T., S., Y., U., W., L., H., O., M., A., Y., W., S., M., Y, L. & Anzai, M., 2005 Feb 1, In : Default journal.

Research output: Contribution to journalArticle

2004

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 Jun 1, In : Default journal. June 17-19, p. 51-57

Research output: Contribution to journalArticle

2003

Fabrication of ball end mills for high speed milling and their cutting characteristics - Experimental and geometrical evaluations of ball end mills with different helix angles and rake angles

Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristics - Experimental and geometrical evaluations of ball end mills with different helix angles and rake anglesLu, Y., Takeuchi, Y., Takahashi, I., Anzai, M. & Kase, K., 2003 Apr, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 4, p. 530-535 6 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Fabrication of ball end mills for high speed milling and their cutting characteristics - Tool life improvement and machining stabilization through land treatment on cutting edge of solid ball end mill

Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristics - Tool life improvement and machining stabilization through land treatment on cutting edge of solid ball end millLu, Y., Takeuchi, Y., Takahashi, I., Anzai, M. & Kase, K., 2003 Nov, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 11, p. 1584-1589 6 p.

Research output: Contribution to journalArticle

Open Access
2002

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2002 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

2001

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M., 2001, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 May 1, In : Default journal. p. 205-208

Research output: Contribution to journalArticle

2000

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M., 2000 Jun 1, In : Default journal. (2000.6), p. 469-474

Research output: Contribution to journalArticle

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K., 2000 Jun 1, In : Default journal. (2000.6), p. 464-468

Research output: Contribution to journalArticle

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 2000 Jun 1, In : Default journal. (2000.6), p. 237-241

Research output: Contribution to journalArticle

1999

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 1999 Oct 1, In : Default journal. (1999.10), p. 647-650

Research output: Contribution to journalArticle

Development of Ultra High Speed Milling Machine using Reciprocating Layer Cutter Path

Takahashi, I., Anzai, M. & Nakagawa, T., 1999 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 5, p. 714-718 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 Jun, In : Computers in Industry. 39, 1, p. 27-33 7 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)
15 Citations (Scopus)
1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 86-92

Research output: Contribution to journalArticle

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 264-269

Research output: Contribution to journalArticle

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 248-257

Research output: Contribution to journalArticle

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 Jun 1, In : 韓国精密工学会誌. Vol.13, p. 59-65

Research output: Contribution to journalArticle

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 Apr 1, In : RIKEN Review No.12. p. 19-20

Research output: Contribution to journalArticle

Magnetic abrasive automatic Polishing of curved surface, Focused on Experimental Equipments and Characterization

Anzai, M., Yoshida, T. & Nakagawa, T., 1996 Apr 1, In : RIKEN Review No.12. p. 15-16

Research output: Contribution to journalArticle

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T., 1996 Dec 1, In : International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 Apr 1, In : International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

Research output: Contribution to journalArticle

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T., 1996 Apr 1, In : RIKEN Review No.12. p. 17-18

Research output: Contribution to journalArticle