• 262 Citations
  • 7 h-Index
1985 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
1985

Research and Development of C/C Composites using Bulk Mesophase

OKURA, A. & Anzai, M., 1985 Dec 1, In : Transaction ISIJ. 25, p. B375

Research output: Contribution to journalArticle

1990

Automatic Polishing of 3-D Mold Surface by Magnetic Abrasive

ANZAI, M., MASAKI, K. & NAKAGAWA, T., 1990 May 1, In : Default journal. (1990.5), p. 184-191

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)
Open Access
2 Citations (Scopus)

Magnetic Abrasive Finishing using PPM Magnetic Abrasives

Masaki, K., Anzai, M. & Nakagawa, T., 1990, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 56, 5, p. 935-940 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
1991

Fabrication of Magnetic Abrasives Using Plasma Powder Melting Method (The Effect of Fe Matrix)

Anzai, M., Masaki, K. & Nakagawa, T., 1991 Jan 1, In : Journal of the Japan Society of Powder and Powder Metallurgy. 38, 4, p. 472-476 5 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Preparation of Magnetic Abrasives by Mechanical Alloying and Its Finishing Properties

Anzai, M., Sudo, T., Endo, H., Otaki, H. & Nakagawa, T., 1991 Jan 1, In : Journal of the Japan Society of Powder and Powder Metallurgy. 38, 1, p. 55-58 4 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
1992

Automatic Polishing of Mold Surface by Magnetic Abrasive Finishing

ANZAI, M., SUDO, T. & NAKAGAWA, T., 1992 Sep 1, In : Default journal. (1992.9), p. 144-153

Research output: Contribution to journalArticle

Magnetic Finishing of WC-Co Alloy Using Diamond Paste

Anzai, M., Sudo, T., Otaki, H., Obana, T. & Nakagawa, T., 1992 Dec, In : Journal of the Japan Society of Powder and Powder Metallurgy. 39, 6, p. 510-514 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Production of Zinc Back-up. Stainless Steel Replicated Mold by Arc Spray and Metallizing Process,

ANZAI, M., ENDO, H. & NAKAGAWA, T., 1992 Sep 1, In : Default journal. (1992.9), p. 212-220

Research output: Contribution to journalArticle

1993

Application for Deburring of Mechanical Parts Using Magnetic Abrasive Finishing

ANZAI, M., OTAKI, H., KAWASHIMA, E. & NAKAGAWA, T., 1993 Mar 1, In : International Journal of the Japan Society for Precision Engineering. Vol. 27, p. 223-224

Research output: Contribution to journalArticle

Magnetic Abrasive Finishing of WC-Co Curved Surface

ANZAI, M., KAWASHIMA, E., OTAKI, H. & NAKAGAWA, T., 1993 Jul 1, In : Default journal. (1993.7), p. 415-422

Research output: Contribution to journalArticle

2 Citations (Scopus)

Magnetic Assisted Polishing of WC-Co Alloy

ANZAI, M., OTAKI, H., SUDO, T. & NAKAGAWA, T., 1993 Jul 1, In : Default journal. (1993.7), p. 1248-1251

Research output: Contribution to journalArticle

Manufacturing of Ferrite-Base Abrasives for Magnetic-Electrolytic Polishing and It's Finishing Characteristics

Anzai, M., Kawashima, E., Nakagawa, T., Otaki, H., Ayabe, Y. & Takahashi, S., 1993, In : Journal of the Japan Society of Powder and Powder Metallurgy. 40, 8, p. 833-836 4 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
1995

Development of Magnetic Polishing Tool using Sm-Co Magnet

ANZAI, M., JEONG, H., KAWASHIMA, E. & NAKAGAWA, T., 1995 Mar 1, In : International Journal of the Japan Society for Precision Engineering. Vol. 29, p. 241-242

Research output: Contribution to journalArticle

High Speed Milling of Cast Iron

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & MATSUOKA, T., 1995 Sep 1, In : Default journal. (1995.9), p. 353-363

Research output: Contribution to journalArticle

Magnetic Abrasive Finishing of Mold Surface

ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & LEE, Y. C., 1995 Sep 1, In : Default journal. (1995.9), p. 365-373

Research output: Contribution to journalArticle

Rapid prototyping for direct manufacturing of metallic parts

Nakagawa, T. & Anzai, M., 1995, In : Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 64, 7, p. 505-510 6 p.

Research output: Contribution to journalArticle

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 Jun 1, In : 韓国精密工学会誌. Vol.13, p. 59-65

Research output: Contribution to journalArticle

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 Apr 1, In : RIKEN Review No.12. p. 19-20

Research output: Contribution to journalArticle

Magnetic abrasive automatic Polishing of curved surface, Focused on Experimental Equipments and Characterization

Anzai, M., Yoshida, T. & Nakagawa, T., 1996 Apr 1, In : RIKEN Review No.12. p. 15-16

Research output: Contribution to journalArticle

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T., 1996 Dec 1, In : International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 Apr 1, In : International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

Research output: Contribution to journalArticle

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T., 1996 Apr 1, In : RIKEN Review No.12. p. 17-18

Research output: Contribution to journalArticle

Ultra High Speed Milling of Quenched Die Steel

Matsuoka, T., Takahashi, I., ANZAI, M., NAKAGAWA, T. & Takeoka, E., 1996 Sep 1, In : Default journal. (1996.9), p. 655-670

Research output: Contribution to journalArticle

1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 86-92

Research output: Contribution to journalArticle

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 264-269

Research output: Contribution to journalArticle

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 Jun 1, In : Default journal. (1997.6), p. 248-257

Research output: Contribution to journalArticle

1999

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 1999 Oct 1, In : Default journal. (1999.10), p. 647-650

Research output: Contribution to journalArticle

Development of Ultra High Speed Milling Machine using Reciprocating Layer Cutter Path

Takahashi, I., Anzai, M. & Nakagawa, T., 1999 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 5, p. 714-718 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 Jun, In : Computers in Industry. 39, 1, p. 27-33 7 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)
15 Citations (Scopus)
2000

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M., 2000 Jun 1, In : Default journal. (2000.6), p. 469-474

Research output: Contribution to journalArticle

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K., 2000 Jun 1, In : Default journal. (2000.6), p. 464-468

Research output: Contribution to journalArticle

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 2000 Jun 1, In : Default journal. (2000.6), p. 237-241

Research output: Contribution to journalArticle

2001

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M., 2001, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 May 1, In : Default journal. p. 205-208

Research output: Contribution to journalArticle

2002

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2002 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

2003

Fabrication of ball end mills for high speed milling and their cutting characteristics - Experimental and geometrical evaluations of ball end mills with different helix angles and rake angles

Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristics - Experimental and geometrical evaluations of ball end mills with different helix angles and rake anglesLu, Y., Takeuchi, Y., Takahashi, I., Anzai, M. & Kase, K., 2003 Apr, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 4, p. 530-535 6 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Fabrication of ball end mills for high speed milling and their cutting characteristics - Tool life improvement and machining stabilization through land treatment on cutting edge of solid ball end mill

Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristics - Tool life improvement and machining stabilization through land treatment on cutting edge of solid ball end millLu, Y., Takeuchi, Y., Takahashi, I., Anzai, M. & Kase, K., 2003 Nov, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 11, p. 1584-1589 6 p.

Research output: Contribution to journalArticle

Open Access
2004

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 Jun 1, In : Default journal. June 17-19, p. 51-57

Research output: Contribution to journalArticle

2005

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2005 Apr 1, In : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

A Study on Nano-precision Combined Process of ELID Grinding and Magnetic Assisted Polishing on Optics Glass Material

LEE, Y-C., KWAK, T. S., OHMORI, H., ANZAI, M. & LIN, W., 2005 Feb 1, In : Default journal.

Research output: Contribution to journalArticle

Micro forming simulation techniques and its application

T., K., T., S., Y., U., W., L., H., O., M., A., Y., W., S., M., Y, L. & Anzai, M., 2005 Feb 1, In : Default journal.

Research output: Contribution to journalArticle

2006
Open Access

Latest Technology of High-speed milling

ANZAI, M., 2006 Jun 3, In : Default journal.

Research output: Contribution to journalArticle

Tailor-made tricalcium phosphate bone implant directly fabricated by a three-dimensional ink-jet printer

Igawa, K., Mochizuki, M., Sugimori, O., Shimizu, K., Yamazawa, K., Kawaguchi, H., Nakamura, K., Takato, T., Nishimura, R., Suzuki, S., Anzai, M., Chung, U. I. & Sasaki, N., 2006 Dec, In : Journal of Artificial Organs. 9, 4, p. 234-240 7 p.

Research output: Contribution to journalArticle

51 Citations (Scopus)