• 2459 Citations
  • 25 h-Index
1989 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

1989

FFT analysis of polarization current fluctuation during corrosion fatigue on HT60 high-strength steel

Ono, M., Kayano, Y., Shimojo, M., Higo, Y. & Nunomura, S., 1989 Jan 1, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 75, 1, p. 113-120 8 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)
1990

Strain synchronized polarization current analysis on Ti alloy in 0.9% NaCl solution during potentiostatic corrosion fatigue test

Ono, M., Shimojo, M., Higo, Y. & Nunomura, S., 1990 Jan 1, In : Default journal. p. 2019-2024

Research output: Contribution to journalArticle

1991

Relation between the Amount of Fresh Bare Surface at the Crack Tip and the Fatigue Crack Propagation Rate

Shimojo, M., Higo, Y. & Nunomura, S., 1991 Jan, In : ISIJ International. 31, 8, p. 870-874 5 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)
1993

Development of a multi-specimen stress corrosion cracking testing system using a constant K specimen

Nunomura, S., Higo, Y., Shimojo, M. & Nishiyama, T., 1993 Jan 1, In : Default journal. 1, p. 285-286

Research output: Contribution to journalArticle

Effect of load ratio on the deformation behavior of fatigue crack tips

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1993 Jan 1, In : Int. J. Fatigue. 15, p. 455-459

Research output: Contribution to journalArticle

4 Citations (Scopus)

Effect of load ratio on the deformation behaviour of fatigue crack tips

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1993 Nov, In : International Journal of Fatigue. 15, 6, p. 455-459 5 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Quantification of fresh surface area produced at a fatigue crack tip

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1993 Jan 1, In : Default journal. p. 751-756

Research output: Contribution to journalArticle

1994
1996

Characterisation of fatigue crack growth in an Al-Al3Ni functionally graded material

Fukui, Y., Shimojo, M. & Bowen, P., 1996 Jan 1, In : Default journal. p. 285-286

Research output: Contribution to journalArticle

Possibility of root growth measurement under ground by acoustic emission sensor

Okushima, L., Shimojo, M., Higo, Y., Ohtani, T. & Sase, S., 1996 Jan 1, In : Default journal. p. 339-343

Research output: Contribution to journalArticle

1997

A new life extension method for high cycle fatigue using micro-martensitic transformation in an austenitic stainless steel

Myeong, T. H., Yamabayashi, Y., Shimojo, M. & Higo, Y., 1997 Dec 1, In : International Journal of Fatigue. 19, SUPPL.1, p. S69-S73

Research output: Contribution to journalArticle

25 Citations (Scopus)

A new method of dynamic measurements of the plastic deformation occurring at a fatigue crack tip

Shimojo, M., Nagatomo, T., Higo, Y. & Nunomura, S., 1997 Mar, In : International Journal of Fatigue. 19, 3, p. 237-241 5 p.

Research output: Contribution to journalArticle

Detection of local tensile and shear stress on a non-crystalline polymer using an acoustoelastic stress measurement technique

Bokoi, Y., Abiko, H., Shimojo, M., Ishiyama, C. & Higo, Y., 1997 Jan 1, In : Default journal. p. 332-333

Research output: Contribution to journalArticle

Effects of humidity on creep fracture and crazing behaviour of PMMA

Ishiyama, C., Shiraishi, Y., Shimojo, M. & Higo, Y., 1997 Jan 1, In : Default journal. p. 1029-1035

Research output: Contribution to journalArticle

The effects of localised stress field near the crack tip on fatigue striation alignment in Fe-3%Si single crystals

Shimojo, M., Uchida, Y. & Higo, Y., 1997 Jan 1, In : Default journal. 3, p. 1653-1660

Research output: Contribution to journalArticle

The entering behavior of environmental gases into the plastic zone around fatigue crack tips in titanium

Shimojo, M., Iguchi, R., Myeong, T. H. & Higo, Y., 1997 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 28, 6, p. 1341-1346 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
1998

Effects of control mode in a cross-ply Ti-MMC at ambient and high temperature in air and in vacuum

Brisset, F., Shimojo, M. & Bowen, P., 1998 May, In : International Journal of Fatigue. 20, 5, p. 339-349 11 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Effects of humidity on acoustic emission characteristics during environmental stress cracking in polymethyl methacrylate (PMMA)

Ishiyama, C., Sakuma, T., Bokoi, Y., Shimojo, M. & Higo, Y., 1998 Jan 1, In : Default journal. p. 99-106

Research output: Contribution to journalArticle

5 Citations (Scopus)

Mechanism of the two stage plastic deformation following an overload in fatigue crack growth

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1998 May, In : International Journal of Fatigue. 20, 5, p. 365-371 7 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)
1999

A new fatigue testing machine for micro-sized specimens

Takashima, K., Kimura, T., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 1999 Jan 1, In : Default journal. 3, p. 1871-1876

Research output: Contribution to journalArticle

A study of a fatigue striation formation mechanism by in-situ observation under a laser microscope during cyclic loading on PMMA

Kobayashi, M., Asai, T., Bokoi, Y., Ishiyama, C., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 144

Research output: Contribution to journalArticle

Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 1999 Jan 1, In : Default journal. p. 74-78

Research output: Contribution to journalArticle

Effects of humidity on environmental stress crack propagation in polymethyl methacrylate (PMMA)

Ishiyama, C., Sakuma, T., Bokoi, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 142

Research output: Contribution to journalArticle

Effects of inert gas on fatigue crack growth in titanium

Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. 4, p. 2311-2316

Research output: Contribution to journalArticle

Fatigue life extension by nano-sized martensite particles in steels

Inamura, T., Abe, R., Myeong, T. H., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. 3, p. 1761-1766

Research output: Contribution to journalArticle

Fatigue striation formation in an Fe-3%Si alloy -- Effects of crystallographic orientation and neighboring grains --

Shimojo, M., Uchida, Y., Turuoka, S. & Higo, Y., 1999 Jan 1, In : Fatigue Fract. Eng. Mater. Struct.. 22, p. 153-159

Research output: Contribution to journalArticle

5 Citations (Scopus)

Fatigue striation formation in an Fe-3%Si alloy - effects of crystallographic orientation and neighbouring grains

Shimojo, M., Uchida, Y., Turuoka, S. & Higo, Y., 1999 Feb 1, In : Fatigue and Fracture of Engineering Materials and Structures. 22, 2, p. 153-159 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Fatigue tests of Ni-P amorphous alloy microcantilever beams

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y., Sugiura, S., Pfister, B. & Swain, M. V., 1999 Dec 1, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 38, 12 B, p. 7194-7198 5 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

Fatigue tests of Ni-P amorphous alloy micro-cantilever beams

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y., Sugiura, S., Pfister, B. & Swain, M. V., 1999 Jan 1, In : Default journal. p. 132-133

Research output: Contribution to journalArticle

8 Citations (Scopus)

Non-destructive inspection of fatigue damage by measuring internal friction

Inamura, T., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 157-161

Research output: Contribution to journalArticle

Relationship between fatigue striation height and stress ratio

Uchida, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Journal of Materials Science. 34, 10, p. 2411-2419 9 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Relationship between striation height and stress ratio

Uchida, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : J. Mater. Sci.. 34, p. 2411-2419

Research output: Contribution to journalArticle

6 Citations (Scopus)

The mechanisms of striation formation in poly (methyl methacrylate) (PMMA)

Ishiyama, C., Asai, T., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. 3, p. 1761-1766

Research output: Contribution to journalArticle

2000

Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films

Takashima, K., Ogura, A., Ichikawa, Y., Shimojo, M. & Higo, Y., 2000 Jan 1, In : Default journal. p. 574

Research output: Contribution to journalArticle

Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 Jan 1, In : Default journal. p. 10

Research output: Contribution to journalArticle

Deformation behavior of micro-sized austenitic stainless steel specimens

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2000 Jan 1, In : Default journal. p. 52-53

Research output: Contribution to journalArticle

7 Citations (Scopus)

Effects of sorbed water on crack propagation in poly(methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 Oct 1, In : Journal of Materials Science. 35, 19, p. 5001-5011 11 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Effects of sorbed water on crack propagation in poly (methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 Jan 1, In : J. Mater. Sci.. 35, p. 5001-5011

Research output: Contribution to journalArticle

11 Citations (Scopus)

Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens

Takashima, K., Maekawa, S., Ichikawa, Y., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 526-529

Research output: Contribution to journalArticle

Fatigue properties for micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Dec 1, In : Materials Research Society Symposium - Proceedings. 605, p. 247-252 6 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Fatigue properties of micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. 605, p. 273-278

Research output: Contribution to journalArticle

6 Citations (Scopus)

Fatigue testing machine of micro-sized specimens for MEMS applications

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. & Swain, M. V., 2000 Dec 1, In : Materials Research Society Symposium - Proceedings. 605, p. 241-246 6 p.

Research output: Contribution to journalConference article

38 Citations (Scopus)

Fracture and fatigue properties of micro-sized specimens for bio-medical applications

Higo, Y., Takashima, K., Shimojo, M. & Ishiyama, C., 2000 Jan 1, In : Default journal. p. 106

Research output: Contribution to journalArticle

Fracture behavior of micro-sized Ni-P amorphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Dec 1, In : Materials Research Society Symposium - Proceedings. 605, p. 273-278 6 p.

Research output: Contribution to journalConference article

16 Citations (Scopus)

Fracture behavior of micro-sized Ni-P amourphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. 605, p. 247-252

Research output: Contribution to journalArticle

24 Citations (Scopus)

Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P amorphous alloy thin film

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 243-246

Research output: Contribution to journalArticle

Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens;

Ogura, A., Ichikawa, Y., Shimojo, M., Takashima, K., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 574-577

Research output: Contribution to journalArticle

Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 Jun 1, In : Japanese Journal of Applied Physics, Part 2: Letters. 39, 6 B, p. L611-L613

Research output: Contribution to journalArticle

18 Citations (Scopus)