If you made any changes in Pure these will be visible here soon.

Research Output 1989 2019

  • 2419 Citations
  • 25 h-Index
  • 299 Article
  • 26 Conference contribution
  • 3 Chapter
Article
9 Citations (Scopus)

Microstructural analysis and transport properties of MoO and MoC nanostructures prepared by focused electron beam-induced deposition

Makise, K., Mitsuishi, K., Shimojo, M. & Shinozaki, B., 2014 Jul 18, In : Scientific Reports. 4, 5740.

Research output: Contribution to journalArticle

molybdenum carbides
nanowires
transport properties
molybdenum oxides
electron beams
37 Citations (Scopus)

Microstructure characterization of tungsten-containing nanorods deposited by electron beam-induced chemical vapor decomposition

Han, M., Mitsuishi, K., Shimojo, M. & Furuya, K., 2004 Jan 1, In : Phil. Mag.. 84, p. 1281-1289

Research output: Contribution to journalArticle

Microstructure evolution and creep behavior of near-¡ Ti alloy produced by thermomechanical processing

Masuyama, H., Shimagami, K., Toda, Y., Matsunaga, T., Ito, T., Shimojo, M. & Yamabe-Mitarai, Y., 2019 Jan 1, In : Materials Transactions. 60, 11, p. 2336-2345 10 p.

Research output: Contribution to journalArticle

Creep
microstructure
Microstructure
Lamellar structures
Processing
6 Citations (Scopus)

Modeling of semi-shell nanostructures formed by metal deposition on dielectric nanospheres and numerical evaluation of plasmonic properties

Fujimura, R., Zhang, R., Kitamoto, Y., Shimojo, M. & Kajikawa, K., 2014, In : Japanese Journal of Applied Physics. 53, 3, 035201.

Research output: Contribution to journalArticle

Nanospheres
Nanostructures
evaluation
Metals
metals
5 Citations (Scopus)

Modulation of friction dynamics in water by changing the combination of the loop- and graft-type poly(ethylene glycol) surfaces

Seo, J. H., Tsutsumi, Y., Kobari, A., Shimojo, M., Hanawa, T. & Yui, N., 2015 Feb 7, In : Soft Matter. 11, 5, p. 936-942 7 p.

Research output: Contribution to journalArticle

Grafts
Polyethylene glycols
glycols
ethylene
friction
18 Citations (Scopus)

Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 Jun, In : Japanese Journal of Applied Physics, Part 2: Letters. 39, 6 B

Research output: Contribution to journalArticle

Shear deformation
Molecular dynamics
Shear stress
Crystallization
crystallization
6 Citations (Scopus)

Morphology of iron silicide nanorods formed by electron-beam-induced deposition using ultrahigh-vacuum transmission electron microscope

Tanaka, M., Han, M., Takeguchi, M., Chu, F., Shimojo, M., Mitsuishi, K. & Furuya, K., 2005 Jul 26, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 44, 7 B, p. 5635-5638 4 p.

Research output: Contribution to journalArticle

Ultrahigh vacuum
Nanorods
ultrahigh vacuum
nanorods
Electron beams

Nano-cluster arrays of In and In/Ag compound on Si(111)-7x7 studied by UHV-TEM/STM

Tanaka, M., Teraoka, A. & Shimojo, M., 2009 Oct 1, In : Default journal.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Nanodot and nanorod formation in electron-beam-induced deposition using iron carbonyl

Shimojo, M., Zhang, W., Takeguchi, M., Tanaka, M., Mitsuishi, K. & Furuya, K., 2005 Jul 26, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 44, 7 B, p. 5651-5653 3 p.

Research output: Contribution to journalArticle

Nanorods
nanorods
Electron beams
rods
electron beams
8 Citations (Scopus)

Nano-dot and nano-rod formation in electron beam induced deposition using iron carbonyl

Shimojo, M., Zhang, W., Takeguchi, M., Tanaka, M., Mitsuishi, K. & Furuya, K., 2005 Jan 1, In : Jpn. J. Appl. Phys. 44, p. 5651-5653

Research output: Contribution to journalArticle

6 Citations (Scopus)

Nano-fabrication combining electron-beam-induced deposition and low energy ion beam

Mitsuishi, K., Shimojo, M., Tanaka, M. & Furuya, K., 2006 Jan 1, In : Nucl. Instrum. Meth. B. 242, p. 244-246

Research output: Contribution to journalArticle

Nano-fabrication technique using electron-beam-induced deposition with low energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M. & Furuya, K., 2005 Mar 1, In : Default journal. p. 29-34

Research output: Contribution to journalArticle

118 Citations (Scopus)

Nano-fabrication using a sub-nanometer-sized probe of high energy electrons

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M., Song, M. & Furuya, K., 2003 Jan 1, In : Appl. Phys. Lett.. 83, p. 2064-2066

Research output: Contribution to journalArticle

Nanofabrication using electron-beam induced deposition combined with low energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi., M. & Furuya, K., 2004 Nov 1, In : Default journal. p. 28

Research output: Contribution to journalArticle

6 Citations (Scopus)
nanofabrication
Nanotechnology
Electron beams
Deposits
deposits

Nanofabrication using electron beam induced deposition technique

Shimojo, M. & Furuya, M. SK. MM. TM. TK., 2011 Dec 1, In : Encyclopedia of Nanoscience and Nanotechnology. 17, p. 209-230

Research output: Contribution to journalArticle

42 Citations (Scopus)

Nanoscale energy-filtered scanning confocal electron microscopy using a double-aberration-corrected transmission electron microscope

Wang, P., Behan, G., Takeguchi, M., Hashimoto, A., Mitsuishi, K., Shimojo, M., Kirkland, A. I. & Nellist, P. D., 2010 May 20, In : Physical Review Letters. 104, 20, 200801.

Research output: Contribution to journalArticle

aberration
electron microscopes
scanning electron microscopy
energy dissipation
scanning
37 Citations (Scopus)

Nanostructure characterization of tungsten-containing nanorods deposited by electron-beam-induced chemical vapour decomposition

Han, M., Mitsuishi, K., Shimojo, M. & Furuya, K., 2004 Apr 21, In : Philosophical Magazine. 84, 12, p. 1281-1289 9 p.

Research output: Contribution to journalArticle

nanorods
tungsten
electron beams
vapors
decomposition
16 Citations (Scopus)

Nanostructure fabrication by electron beam induced deposition with metal carbonyl precursor and water vapor

Takeguchi, M., Shimojo, M. & Furuya, K., 2007 Jan 1, In : Jpn. J. Appl. Phys.. 46, p. 6183-6186

Research output: Contribution to journalArticle

16 Citations (Scopus)
nanofabrication
Nanorods
Water vapor
nanorods
water vapor
9 Citations (Scopus)

Nanostructures fabricated by electron beam induced chemical vapor deposition

Takeguchi, M., Shimojo, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2004 Jul, In : Superlattices and Microstructures. 36, 1-3, p. 255-264 10 p.

Research output: Contribution to journalArticle

Chemical vapor deposition
Electron beams
Nanostructures
Gases
vapor deposition

Nanostructures fabrication by electron beam induced deposition with Fe(CO)5 and H2O followed by thermal treatment

Takeguchi, M., Che, R., Shimojo, M. & Furuya, K., 2006 Oct 1, In : Default journal.

Research output: Contribution to journalArticle

New equipment for evaluating performance of microelements on MEMS

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 997-1000

Research output: Contribution to journalArticle

Non-destructive inspection of fatigue damage by measuring internal friction

Inamura, T., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 157-161

Research output: Contribution to journalArticle

One-dimensional nano-crystalline fabrication inside transmission electron microscope

Che, R. C., Takeguchi, M., Shimojo, M., Furuya, K. & Peng, L. -M., 2005 Mar 1, In : Default journal. p. 37-40

Research output: Contribution to journalArticle

3 Citations (Scopus)

Optical and electrical Kerr effects in polydiacetylene nanoparticle submonolayer probed by surface plasmon resonance spectroscopy

Kuraishi, O., Tanaka, D., Shimojo, M. & Kajikawa, K., 2012 Jun 13, In : Journal of Physics D: Applied Physics. 45, 23, 235105.

Research output: Contribution to journalArticle

Optical Kerr effect
Surface plasmon resonance
Kerr effects
surface plasmon resonance
Spectroscopy

Optical and structural characteristics of gold island films

Gupta, G., Tanaka, D., Ito, Y., Shibata, D., Shimojo, M., Furuya, K. & Kajikawa, K., 2008 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Optical rectification and electro-optic effect of plasmonic metamolecule

Uchiho, Y., Shimojo, M. & Kajikawa, K., 2011 May 1, In : Default journal.

Research output: Contribution to journalArticle

22 Citations (Scopus)

Optical response of gold-nanoparticle-amplified surface plasmon resonance spectroscopy

Uchiho, Y., Shimojo, M., Furuya, K. & Kajikawa, K., 2010 Mar 25, In : Journal of Physical Chemistry C. 114, 11, p. 4816-4824 9 p.

Research output: Contribution to journalArticle

Surface plasmon resonance
surface plasmon resonance
Gold
Spectroscopy
gold
9 Citations (Scopus)

Patterning technique for gold nanoparticles on substrates using a focused electron beam

Noriki, T., Abe, S., Kajikawa, K. & Shimojo, M., 2015, In : Beilstein Journal of Nanotechnology. 6, 1, p. 1010-1015 6 p.

Research output: Contribution to journalArticle

Gold
Electron beams
electron beams
gold
Nanoparticles
1 Citation (Scopus)

Peculiar effects of inert gases on fatigue crack growth in an (α + β)-titanium alloy

Shimojo, M., 2003 Aug 15, In : Materials Science and Engineering A. 354, 1-2, p. 24-30 7 p.

Research output: Contribution to journalArticle

Noble Gases
titanium alloys
Inert gases
Fatigue crack propagation
Titanium alloys
1 Citation (Scopus)

Peculiar effects of inert gases on fatigue crack growth in an ( α+β )-titanium alloy

Shimojo, M., 2003 Jan 1, In : Mater. Sci. Eng. A.. A354, p. 24-30

Research output: Contribution to journalArticle

5 Citations (Scopus)

Phase of the electric field localized at surface-immobilized gold nanospheres determined by second-harmonic interferometry

Yamaguchi, T., Okawa, H., Hashimoto, K., Shimojo, M. & Kajikawa, K., 2011 Feb 28, In : Physical Review B - Condensed Matter and Materials Physics. 83, 8, 085425.

Research output: Contribution to journalArticle

Nanospheres
Interferometry
Gold
Monolayers
interferometry
2 Citations (Scopus)

Phase Transformation and Shape Memory Effect of Ti–Pd–Pt–Zr High-Temperature Shape Memory Alloys

Yamabe-Mitarai, Y., Takebe, W. & Shimojo, M., 2017 Dec 1, In : Shape Memory and Superelasticity. 3, 4, p. 381-391 11 p.

Research output: Contribution to journalArticle

Shape memory effect
Phase transitions
Recovery
Austenite
Temperature
6 Citations (Scopus)

Position and size controlled fabrication of iron silicide nano-rods by electron beam induced deposition using an ultrahigh vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M., Mitsuishi, K. & Furuya, K., 2005 Jan 1, In : Jpn. J. Appl. Phys. 44, p. 5635-5638

Research output: Contribution to journalArticle

19 Citations (Scopus)

Position- and size-controlled fabrication of iron silicide nanorods by electron-beam-induced deposition using an ultrahigh-vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M., Mitsuishi, K. & Furuya, K., 2005 May 2, In : Applied Physics Letters. 86, 18, p. 1-3 3 p., 183104.

Research output: Contribution to journalArticle

ultrahigh vacuum
nanorods
electron microscopes
electron beams
iron
5 Citations (Scopus)

Position and size controlled fabrication of nano-metals and semiconductors with fine focused electron beam

Furuya, K., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2003 Jan 1, In : Rev. Adv. Mater. Sci.. 5, p. 381-386

Research output: Contribution to journalArticle

5 Citations (Scopus)

Position and size controlled fabrication of nano-metals and -semiconductors with fine focused electron beam

Furuya, K., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2003 Dec, In : Reviews on Advanced Materials Science. 5, 4, p. 381-386 6 p.

Research output: Contribution to journalArticle

Nanocrystals
Electron beams
Metals
electron beams
Semiconductor materials

Position and size controlled fabrication of nm-sized structures with intense focused electron beam

Furuya, K., Shimojo, M., Mitsuishi, K., Takeguchi, M., Tanaka, M. & Song, M., 2005 Oct 1, In : Default journal.

Research output: Contribution to journalArticle

Possibility of root growth measurement under ground by acoustic emission sensor

Okushima, L., Shimojo, M., Higo, Y., Ohtani, T. & Sase, S., 1996 Jan 1, In : Default journal. p. 339-343

Research output: Contribution to journalArticle

15 Citations (Scopus)

Post-deposition processes for nanostructures formed by electron beam induced deposition with Pt(PF3)4 precursor

Takeguchi, M., Shimojo, M. & Furuya, K., 2008 Jan 1, In : Appl. Phys. A. 93, p. 439-442

Research output: Contribution to journalArticle

15 Citations (Scopus)

Post-deposition processes for nanostructures formed by electron beam induced deposition with Pt(PF3)4 precursor

Takeguchi, M., Shimojo, M. & Furuya, K., 2008 Nov, In : Applied Physics A: Materials Science and Processing. 93, 2, p. 439-442 4 p.

Research output: Contribution to journalArticle

Nanowires
Electron beams
Nanostructures
nanowires
electron beams

Preparation of titanium-inert gas alloys by cyclic plastic deformation

Otsubo, M., Shimojo, M. & Higo, Y., 2001, In : International Journal of Materials and Product Technology. SPEC ISS. VOL.2, p. 506-510 5 p.

Research output: Contribution to journalArticle

Noble Gases
Inert gases
Titanium
Plastic deformation
Ball milling
12 Citations (Scopus)

Proximity effect in electron beam-induced deposition

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M. & Furuya, K., 2006 Jan 1, In : Jpn. J. Appl. Phys. 45, p. 5517-5521

Research output: Contribution to journalArticle

12 Citations (Scopus)

Proximity effect in electron-beam-induced deposition

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M. & Furuya, K., 2006 Jun 20, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 45, 6 B, p. 5517-5521 5 p.

Research output: Contribution to journalArticle

Electrostatic force
Electron beams
electron beams
electrostatics
nanofabrication

Quantification of fresh surface area produced at a fatigue crack tip

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1993 Jan 1, In : Default journal. p. 751-756

Research output: Contribution to journalArticle

3 Citations (Scopus)

Random laser of dye-injected holey photonic-crystal fiber

Yonenaga, Y., Fujimura, R., Shimojo, M., Kubono, A. & Kajikawa, K., 2015 Jul 14, In : Physical Review A - Atomic, Molecular, and Optical Physics. 92, 1, 013824.

Research output: Contribution to journalArticle

dyes
photonics
fibers
crystals
lasers
8 Citations (Scopus)

Relation between the amount of fresh bare surface at the crack tip and the fatigue crack propagation rate

Shimojo, M., Higo, Y. & Nunomura, S., 1991, In : ISIJ International. 31, 8, p. 870-874 5 p.

Research output: Contribution to journalArticle

Fatigue crack propagation
Crack tips
Fatigue of materials
Plastics
Electric charge
6 Citations (Scopus)

Relationship between fatigue striation height and stress ratio

Uchida, Y., Shimojo, M. & Higo, Y., 1999, In : Journal of Materials Science. 34, 10, p. 2411-2419 9 p.

Research output: Contribution to journalArticle

Fatigue of materials
Scanning
Stress intensity factors
Failure analysis
Aluminum alloys