• 2475 Citations
  • 25 h-Index
1989 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Article

Nanostructure fabrication by electron beam induced deposition with metal carbonyl precursor and water vapor

Takeguchi, M., Shimojo, M. & Furuya, K., 2007 Jan 1, In : Jpn. J. Appl. Phys.. 46, p. 6183-6186

Research output: Contribution to journalArticle

16 Citations (Scopus)
16 Citations (Scopus)

Nanostructures fabrication by electron beam induced deposition with Fe(CO)5 and H2O followed by thermal treatment

Takeguchi, M., Che, R., Shimojo, M. & Furuya, K., 2006 Oct 1, In : Default journal.

Research output: Contribution to journalArticle

New equipment for evaluating performance of microelements on MEMS

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 997-1000

Research output: Contribution to journalArticle

Non-destructive inspection of fatigue damage by measuring internal friction

Inamura, T., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 157-161

Research output: Contribution to journalArticle

One-dimensional nano-crystalline fabrication inside transmission electron microscope

Che, R. C., Takeguchi, M., Shimojo, M., Furuya, K. & Peng, L. -M., 2005 Mar 1, In : Default journal. p. 37-40

Research output: Contribution to journalArticle

Optical and electrical Kerr effects in polydiacetylene nanoparticle submonolayer probed by surface plasmon resonance spectroscopy

Kuraishi, O., Tanaka, D., Shimojo, M. & Kajikawa, K., 2012 Jun 13, In : Journal of Physics D: Applied Physics. 45, 23, 235105.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Optical and structural characteristics of gold island films

Gupta, G., Tanaka, D., Ito, Y., Shibata, D., Shimojo, M., Furuya, K. & Kajikawa, K., 2008 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Optical rectification and electro-optic effect of plasmonic metamolecule

Uchiho, Y., Shimojo, M. & Kajikawa, K., 2011 May 1, In : Default journal.

Research output: Contribution to journalArticle

Optical response of gold-nanoparticle-amplified surface plasmon resonance spectroscopy

Uchiho, Y., Shimojo, M., Furuya, K. & Kajikawa, K., 2010 Mar 25, In : Journal of Physical Chemistry C. 114, 11, p. 4816-4824 9 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)

Patterning technique for gold nanoparticles on substrates using a focused electron beam

Noriki, T., Abe, S., Kajikawa, K. & Shimojo, M., 2015, In : Beilstein Journal of Nanotechnology. 6, 1, p. 1010-1015 6 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Peculiar effects of inert gases on fatigue crack growth in an (α + β)-titanium alloy

Shimojo, M., 2003 Aug 15, In : Materials Science and Engineering A. 354, 1-2, p. 24-30 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Peculiar effects of inert gases on fatigue crack growth in an ( α+β )-titanium alloy

Shimojo, M., 2003 Jan 1, In : Mater. Sci. Eng. A.. A354, p. 24-30

Research output: Contribution to journalArticle

1 Citation (Scopus)

Phase of the electric field localized at surface-immobilized gold nanospheres determined by second-harmonic interferometry

Yamaguchi, T., Okawa, H., Hashimoto, K., Shimojo, M. & Kajikawa, K., 2011 Feb 28, In : Physical Review B - Condensed Matter and Materials Physics. 83, 8, 085425.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Phase Transformation and Shape Memory Effect of Ti–Pd–Pt–Zr High-Temperature Shape Memory Alloys

Yamabe-Mitarai, Y., Takebe, W. & Shimojo, M., 2017 Dec 1, In : Shape Memory and Superelasticity. 3, 4, p. 381-391 11 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Position and size controlled fabrication of iron silicide nano-rods by electron beam induced deposition using an ultrahigh vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M., Mitsuishi, K. & Furuya, K., 2005 Jan 1, In : Jpn. J. Appl. Phys. 44, p. 5635-5638

Research output: Contribution to journalArticle

6 Citations (Scopus)

Position- and size-controlled fabrication of iron silicide nanorods by electron-beam-induced deposition using an ultrahigh-vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M., Mitsuishi, K. & Furuya, K., 2005 May 2, In : Applied Physics Letters. 86, 18, p. 1-3 3 p., 183104.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Position and size controlled fabrication of nano-metals and semiconductors with fine focused electron beam

Furuya, K., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2003 Jan 1, In : Rev. Adv. Mater. Sci.. 5, p. 381-386

Research output: Contribution to journalArticle

5 Citations (Scopus)

Position and size controlled fabrication of nano-metals and -semiconductors with fine focused electron beam

Furuya, K., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2003 Dec 1, In : Reviews on Advanced Materials Science. 5, 4, p. 381-386 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Position and size controlled fabrication of nm-sized structures with intense focused electron beam

Furuya, K., Shimojo, M., Mitsuishi, K., Takeguchi, M., Tanaka, M. & Song, M., 2005 Oct 1, In : Default journal.

Research output: Contribution to journalArticle

Possibility of root growth measurement under ground by acoustic emission sensor

Okushima, L., Shimojo, M., Higo, Y., Ohtani, T. & Sase, S., 1996 Jan 1, In : Default journal. p. 339-343

Research output: Contribution to journalArticle

Post-deposition processes for nanostructures formed by electron beam induced deposition with Pt(PF3)4 precursor

Takeguchi, M., Shimojo, M. & Furuya, K., 2008 Jan 1, In : Appl. Phys. A. 93, p. 439-442

Research output: Contribution to journalArticle

15 Citations (Scopus)

Post-deposition processes for nanostructures formed by electron beam induced deposition with Pt(PF3)4 precursor

Takeguchi, M., Shimojo, M. & Furuya, K., 2008 Nov, In : Applied Physics A: Materials Science and Processing. 93, 2, p. 439-442 4 p., 439.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Preparation of titanium-inert gas alloys by cyclic plastic deformation

Otsubo, M., Shimojo, M. & Higo, Y., 2001, In : International Journal of Materials and Product Technology. SPEC ISS. VOL.2, p. 506-510 5 p.

Research output: Contribution to journalArticle

Proximity effect in electron beam-induced deposition

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M. & Furuya, K., 2006 Jan 1, In : Jpn. J. Appl. Phys. 45, p. 5517-5521

Research output: Contribution to journalArticle

12 Citations (Scopus)

Quantification of fresh surface area produced at a fatigue crack tip

Shimojo, M., Chujo, M., Higo, Y. & Nunomura, S., 1993 Jan 1, In : Default journal. p. 751-756

Research output: Contribution to journalArticle

Random laser of dye-injected holey photonic-crystal fiber

Yonenaga, Y., Fujimura, R., Shimojo, M., Kubono, A. & Kajikawa, K., 2015 Jul 14, In : Physical Review A - Atomic, Molecular, and Optical Physics. 92, 1, 013824.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Relation between the Amount of Fresh Bare Surface at the Crack Tip and the Fatigue Crack Propagation Rate

Shimojo, M., Higo, Y. & Nunomura, S., 1991 Jan, In : ISIJ International. 31, 8, p. 870-874 5 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Relationship between fatigue striation height and stress ratio

Uchida, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Journal of Materials Science. 34, 10, p. 2411-2419 9 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Relationship between striation height and stress ratio

Uchida, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : J. Mater. Sci.. 34, p. 2411-2419

Research output: Contribution to journalArticle

6 Citations (Scopus)

Resistivity measurement of nanowires formed by electron beam induced chemical vapor deposition

Che, R., Takeguchi, M., Shimojo, M. & Furuya, K., 2005 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Resolution in new nanofabrication technique combining electron-beam-induced deposition and low-energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M. & Furuya, K., 2005 Jul 26, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 44, 7 B, p. 5627-5630 4 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Scanning confocal electron microscopy (SCEM)

Wang, P., Behan, G., Hashimoto, A., Takeguchi, M., Mitsuishi, K., Shimojo, M., Jones, L., Kirkl, A. I. & Nellist, P. D., 2010 Jun 1, In : Default journal.

Research output: Contribution to journalArticle

Scanning confocal electron microscopy (SCEM) combined with deconvolution technique

Takeguchi, M., Kirkl, M. TX. ZA. HK. MM. S. & Shimojo, M., 2012 Dec 1, In : Default journal.

Research output: Contribution to journalArticle

Scanning Confocal Electron Microscopy (SCEM) Combined with Deconvolution Technique

Takeguchi, M., Zhang, X., Hashimoto, A., Mitsuishi, K., Shimojo, M., Wang, P., Peter, N. D. & Kirkland, A. I., 2012, In : Microscopy and Microanalysis. 18, p. 332-333 2 p.

Research output: Contribution to journalArticle

Scanning confocal electron microscopy image calculation based on Bloch wave method

Mitsuishi, K., Takeguchi, M., Shimojo, M., Tanaka, M. & Furuya, K., 2007 Sep 1, In : Default journal.

Research output: Contribution to journalArticle

Scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Wang, P., Behan, G., Kirkl, A. I., Nellist, P. D., Cosgriff, E. C., D'Alfonso, A. J., Morgan, A. J., Allen, L. J., Hashimoto, A., Takeguchi, M., Mitsuishi, K. & Shimojo, M., 2011 Sep 1, In : Default journal.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Second-harmonic spectroscopy of surface immobilized gold nanospheres above a gold surface supported by self-assembled monolayers

Tsuboi, K., Abe, S., Fukuba, S., Shimojo, M., Tanaka, M., Furuya, K., Fujita, K. & Kajikawa, K., 2006 Nov 13, In : Journal of Chemical Physics. 125, 17, 174703.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Selective growth and characterization of metal nanostructures with transmission electron microscopes

Shimojo, M., Bysakh, S., Mitsuishi, K., Tanaka, M., Song, M. & Furuya, K., 2005 Jan 1, In : Appl. Surf. Sci. 241, p. 56-60

Research output: Contribution to journalArticle

7 Citations (Scopus)

Selective growth and characterization of nanostructures with transmission electron microscopes

Shimojo, M., Bysakh, S., Mitsuishi, K., Tanaka, M., Song, M. & Furuya, K., 2005 Feb 28, In : Applied Surface Science. 241, 1-2 SPEC. ISS., p. 56-60 5 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Simulation and deconvolution for chromatic aberration contained SCEM imaging

Zhang, X., Takeguchi, M., Hashimoto, A., Mitsuishi, K., Tezuka, M. & Shimojo, M., 2011 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Size effect of corrosion properties in micro-sized 304 austenitic stainless steel specimens

Mizutani, Y., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Strain synchronized polarization current analysis on Ti alloy in 0.9% NaCl solution during potentiostatic corrosion fatigue test

Ono, M., Shimojo, M., Higo, Y. & Nunomura, S., 1990 Jan 1, In : Default journal. p. 2019-2024

Research output: Contribution to journalArticle

Super-resolution phase reconstruction technique in electron holography with a stage-scanning system

Lei, D., Mitsuishi, K., Harada, K., Shimojo, M., Ju, D. & Takeguchi, M., 2014, In : Japanese Journal of Applied Physics. 53, 2 PART 2, 02BC23.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy

Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

TEM sample preparation using a new nanofabrication technique combining electron beam induced deposition and low energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M., Song, M. & Furuya, K., 2006 Jan 1, In : Microsc. Microanal. 12, p. 545-548

Research output: Contribution to journalArticle

2 Citations (Scopus)

TEM sample preparation using a new nanofabrication technique combining electron-beam-induced deposition and low-energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M., Song, M. & Furuya, K., 2006 Dec 1, In : Microscopy and Microanalysis. 12, 6, p. 545-548 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

The effect of the accelerating voltage in the size of deposit in electron-beam-induced deposition

Mitsuishi, K., Liu, Z. Q., Shimojo, M., Tanaka., M. & Furuya, K., 2004 Jun 1, In : Default journal. p. 401

Research output: Contribution to journalArticle