If you made any changes in Pure these will be visible here soon.

Research Output 1989 2019

  • 2378 Citations
  • 25 h-Index
  • 296 Article
  • 26 Conference contribution
  • 3 Chapter
2001
1 Citation (Scopus)

Crystallization in an amorphous metal during shear deformation: A molecular dynamics study

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, In : International Journal of Materials and Product Technology. SPEC. ISS. VOL.1, p. 71-76 6 p.

Research output: Contribution to journalArticle

Crystallization
Shear deformation
Molecular dynamics
Shear stress
Metals

Deformation behavior of a fine-grained 304 stainless steel using micro-sized specimens

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, In : International Journal of Materials and Product Technology. SPEC. ISS. VOL.1, p. 298-303 6 p.

Research output: Contribution to journalArticle

Stainless Steel
Stainless steel
Austenitic stainless steel
Strain hardening
Grain boundaries

Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Kahn, H., Boer, M., Judy, M. & Spearing, S. (eds.). Vol. 657.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Strain hardening
Cantilever beams
Grain boundary sliding
Dislocations (crystals)
19 Citations (Scopus)

Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique

Inamura, T., Nagano, S., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : J. Acoustic Emission. 19, p. 85-90

Research output: Contribution to journalArticle

Effects of noble gas environments on fatigue crack growth in titanium alloys

Shimojo, M., Kusama, R., Otsubo, M. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel

Inamura, T., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Martensite
Fatigue of materials
Cryogenics
Temperature

Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

66 Citations (Scopus)

Fatigue crack growth behavior of micro-sized specimens prepared from an electroless plated Ni-P amorphous alloy thin film

Takashima, K., Higo, Y., Sugiura, S. & Shimojo, M., 2001, In : Materials Transactions. 42, 1, p. 68-73 6 p.

Research output: Contribution to journalArticle

Amorphous alloys
Fatigue crack propagation
cracks
Thin films
thin films
4 Citations (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 52-61 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Fatigue crack propagation
Thin films
Crack closure
Mechanical testing
4 Citations (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film; Mechanical Properties of Structural Films

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001 Jan 1, In : American Society for Testing and Materials. ASTM STP 1413, p. 52-61

Research output: Contribution to journalArticle

13 Citations (Scopus)

Fatigue crack propagation mechanisms in poly(methyl methacrylate) by in situ observation with a scanning laser microscope

Ishiyama, C., Asai, T., Kobayashi, M., Shimojo, M. & Higo, Y., 2001 Dec 15, In : Journal of Polymer Science, Part B: Polymer Physics. 39, 24, p. 3103-3113 11 p.

Research output: Contribution to journalArticle

crack propagation
Polymethyl Methacrylate
Fatigue crack propagation
Polymethyl methacrylates
polymethyl methacrylate
13 Citations (Scopus)

Fatigue crack propagation mechanisms in poly (methyl methacrylate) by in-situ observation with a scanning laser microscope

Ishiyama, C., Asai, T., Kobayashi, M., Shimojo, M. & Higo, Y., 2001 Jan 1, In : J.polym.Sci.,Pt.B. 39, p. 3103-3113

Research output: Contribution to journalArticle

Fatigue life extension of austenitic stainless steel using nano-sized martensites formed at intersections of dislocations

Inamura, T., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Formation of nano-sized crystals during plastic deformation in amorphous alloys

Ogura, A., Sato, M., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Plastic deformation
Transmission electron microscopy
Crystal orientation
Crystals
6 Citations (Scopus)

Formation of nano-sized martensite particles and its application to fatigue strengthening in an austenitic stainless steel

Inamura, T., Shimojo, M., K., K., Takashima, T. & Higo, Y., 2001 Jan 1, In : Default journal. p. 155-158

Research output: Contribution to journalArticle

19 Citations (Scopus)

Formation of nanosized martensite particles in stainless steels

Shimojo, M., Inamura, T., Myeong, T. H., Takashima, K. & Higo, Y., 2001 Feb, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 32, 2, p. 261-265 5 p.

Research output: Contribution to journalArticle

Stainless Steel
martensite
Martensite
stainless steels
Stainless steel
19 Citations (Scopus)

Formation of nano-sized martensite particles in stainless steels

Shimojo, M., Inamura, T., Myeong, T. H., Takashima, K. & Higo, Y., 2001 Jan 1, In : Metall. Mater. Trans. A. 32A, p. 261-265

Research output: Contribution to journalArticle

8 Citations (Scopus)

Fracture behavior of micro-sized specimens with fatigue pre-crack from a Ni-P amorphous alloy thin film; Mechanical Properties of Structural Films

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001 Jan 1, In : American Society for Testing and Materials. ASTM ASTP1413, p. 72-81

Research output: Contribution to journalArticle

8 Citations (Scopus)

Fracture behavior of micro-sized specimens with fatigue pre-crack prepared from a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 72-81 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Crack propagation
Fatigue of materials
Cracks
Thin films
2 Citations (Scopus)

Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystallization
Molecular dynamics
Plastic deformation
Metals
Computer simulation

Preparation of titanium-inert gas alloys by cyclic plastic deformation

Otsubo, M., Shimojo, M. & Higo, Y., 2001, In : International Journal of Materials and Product Technology. SPEC ISS. VOL.2, p. 506-510 5 p.

Research output: Contribution to journalArticle

Noble Gases
Inert gases
Titanium
Plastic deformation
Ball milling

Size effect of corrosion properties in micro-sized 304 austenitic stainless steel specimens

Mizutani, Y., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy

Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001 Jan 1, In : Default journal.

Research output: Contribution to journalArticle

2000

Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films

Takashima, K., Ogura, A., Ichikawa, Y., Shimojo, M. & Higo, Y., 2000 Jan 1, In : Default journal. p. 574

Research output: Contribution to journalArticle

Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 Jan 1, In : Default journal. p. 10

Research output: Contribution to journalArticle

Deformation behavior of micro-sized austenitic stainless steel specimens

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2000 Jan 1, In : Default journal. p. 52-53

Research output: Contribution to journalArticle

7 Citations (Scopus)
Noble Gases
Inert gases
Titanium
Fatigue crack propagation
rare gases
11 Citations (Scopus)

Effects of sorbed water on crack propagation in poly(methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 Oct, In : Journal of Materials Science. 35, 19, p. 5001-5011 11 p.

Research output: Contribution to journalArticle

Polymethyl Methacrylate
Polymethyl methacrylates
Tensile stress
Crack propagation
Water
11 Citations (Scopus)

Effects of sorbed water on crack propagation in poly (methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 Jan 1, In : J. Mater. Sci.. 35, p. 5001-5011

Research output: Contribution to journalArticle

Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens

Takashima, K., Maekawa, S., Ichikawa, Y., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 526-529

Research output: Contribution to journalArticle

6 Citations (Scopus)

Fatigue properties for micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 247-252 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Fatigue of materials
Fatigue crack propagation
Crack propagation
Stress intensity factors
6 Citations (Scopus)

Fatigue properties of micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. 605, p. 273-278

Research output: Contribution to journalArticle

37 Citations (Scopus)

Fatigue testing machine of micro-sized specimens for MEMS applications

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 241-246 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Fatigue testing
MEMS
Diamonds
Actuators

Fracture and fatigue properties of micro-sized specimens for bio-medical applications

Higo, Y., Takashima, K., Shimojo, M. & Ishiyama, C., 2000 Jan 1, In : Default journal. p. 106

Research output: Contribution to journalArticle

15 Citations (Scopus)

Fracture behavior of micro-sized Ni-P amorphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 273-278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Cracks
Fatigue of materials
Fracture toughness
Mechanical testing
24 Citations (Scopus)

Fracture behavior of micro-sized Ni-P amourphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. 605, p. 247-252

Research output: Contribution to journalArticle

Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P amorphous alloy thin film

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 243-246

Research output: Contribution to journalArticle

Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens;

Ogura, A., Ichikawa, Y., Shimojo, M., Takashima, K., Higo, Y. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 574-577

Research output: Contribution to journalArticle

18 Citations (Scopus)

Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 Jun, In : Japanese Journal of Applied Physics, Part 2: Letters. 39, 6 B

Research output: Contribution to journalArticle

Shear deformation
Molecular dynamics
Shear stress
Crystallization
crystallization

New equipment for evaluating performance of microelements on MEMS

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 Jan 1, In : Default journal. p. 997-1000

Research output: Contribution to journalArticle

1999

A new fatigue testing machine for micro-sized specimens

Takashima, K., Kimura, T., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 1999 Jan 1, In : Default journal. 3, p. 1871-1876

Research output: Contribution to journalArticle

A study of a fatigue striation formation mechanism by in-situ observation under a laser microscope during cyclic loading on PMMA

Kobayashi, M., Asai, T., Bokoi, Y., Ishiyama, C., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 144

Research output: Contribution to journalArticle

Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 1999 Jan 1, In : Default journal. p. 74-78

Research output: Contribution to journalArticle

Effects of humidity on environmental stress crack propagation in polymethyl methacrylate (PMMA)

Ishiyama, C., Sakuma, T., Bokoi, Y., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. p. 142

Research output: Contribution to journalArticle

Effects of inert gas on fatigue crack growth in titanium

Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. 4, p. 2311-2316

Research output: Contribution to journalArticle

Fatigue life extension by nano-sized martensite particles in steels

Inamura, T., Abe, R., Myeong, T. H., Shimojo, M. & Higo, Y., 1999 Jan 1, In : Default journal. 3, p. 1761-1766

Research output: Contribution to journalArticle

5 Citations (Scopus)

Fatigue striation formation in an Fe-3%Si alloy -- Effects of crystallographic orientation and neighboring grains --

Shimojo, M., Uchida, Y., Turuoka, S. & Higo, Y., 1999 Jan 1, In : Fatigue Fract. Eng. Mater. Struct.. 22, p. 153-159

Research output: Contribution to journalArticle

5 Citations (Scopus)

Fatigue striation formation in an Fe-3%Si alloy - effects of crystallographic orientation and neighbouring grains

Shimojo, M., Uchida, Y., Turuoka, S. & Higo, Y., 1999 Feb, In : Fatigue and Fracture of Engineering Materials and Structures. 22, 2, p. 153-159 7 p.

Research output: Contribution to journalArticle

Fatigue of materials
Cracks
Bicrystals
Crystal orientation
Single crystals
28 Citations (Scopus)

Fatigue tests of Ni-P amorphous alloy microcantilever beams

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y., Sugiura, S., Pfister, B. & Swain, M. V., 1999, In : Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 38, 12 B, p. 7194-7198 5 p.

Research output: Contribution to journalArticle

fatigue tests
Amorphous alloys
Fatigue of materials
Fatigue crack propagation
fatigue life