If you made any changes in Pure these will be visible here soon.

Research Output 1989 2019

  • 2378 Citations
  • 25 h-Index
  • 296 Article
  • 26 Conference contribution
  • 3 Chapter
Filter
Conference contribution
Conference contribution

Application of scanning confocal electron microscopy to nanomaterials and the improvement in resolution by image processing

Zhang, X., Takeguchi, M., Hashimoto, A., Mitsuishi, K. & Shimojo, M., 2011, Materials Science Forum. Vol. 675 677. p. 259-262 4 p. (Materials Science Forum; vol. 675 677).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Confocal microscopy
Nanostructured materials
Electron microscopy
image processing
Image processing

Carbon nanostructures formation by electron beam induced deposition at the apex of tungsten needle tip

Che, R. C., Takeguchi, M., Shimojo, M., Zhang, W. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 178-179 2 p. 1595272

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Needles
Tungsten
Electron beams
Nanostructures
Carbon

Characterization of magnetic nanostructures fabricated by electron beam induced-chemical vapor deposition with iron carbonyl gas

Takeguchi, M., Shimojo, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 62-63 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical vapor deposition
Electron beams
Nanostructures
Iron
Gases

Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Kahn, H., Boer, M., Judy, M. & Spearing, S. (eds.). Vol. 657.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Strain hardening
Cantilever beams
Grain boundary sliding
Dislocations (crystals)
2 Citations (Scopus)

Electron beam-induced nano-deposition using a transmission electron microscope

Shimojo, M., Mitsuishi, K., Tanaka, M., Song, M. & Furuya, K., 2005, Materials Science Forum. Vol. 480-481. p. 129-132 4 p. (Materials Science Forum; vol. 480-481).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beams
Electron microscopes
Gases
High resolution electron microscopy
Gold
1 Citation (Scopus)

Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel

Inamura, T., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Martensite
Fatigue of materials
Cryogenics
Temperature

Fabrication and characterization of nano-dots produced by electron beam induced deposition using metal carbonyls

Shimojo, M., Takeguchi, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 144-145 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beams
Fabrication
Electron microscopes
Metals
Field emission
1 Citation (Scopus)

Fabrication of iron oxide nanostructures by electron beam-induced deposition

Shimojo, M., Takeguchi, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2007, Materials Science Forum. PART 2 ed. Vol. 561-565. p. 1101-1104 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron oxides
Electron beams
Nanostructures
Fabrication
Carbon
4 Citations (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 52-61 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Fatigue crack propagation
Thin films
Crack closure
Mechanical testing
6 Citations (Scopus)

Fatigue properties for micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 247-252 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Fatigue of materials
Fatigue crack propagation
Crack propagation
Stress intensity factors
37 Citations (Scopus)

Fatigue testing machine of micro-sized specimens for MEMS applications

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 241-246 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Fatigue testing
MEMS
Diamonds
Actuators

Formation of iron nano-dots by electron beam induced deposition using an ultrahigh vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 60-61 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh vacuum
Electron beams
Electron microscopes
Iron
Fabrication
5 Citations (Scopus)

Formation of nano-sized crystals during plastic deformation in amorphous alloys

Ogura, A., Sato, M., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Plastic deformation
Transmission electron microscopy
Crystal orientation
Crystals
15 Citations (Scopus)

Fracture behavior of micro-sized Ni-P amorphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 273-278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Cracks
Fatigue of materials
Fracture toughness
Mechanical testing
8 Citations (Scopus)

Fracture behavior of micro-sized specimens with fatigue pre-crack prepared from a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 72-81 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amorphous alloys
Crack propagation
Fatigue of materials
Cracks
Thin films

Gold seeds arrangement on a nanoporous anodic aluminum oxide membrane by centrifugal force

Chu, F., Tanaka, M., Shimojo, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 212-213 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seed
Gold
Membranes
Aluminum
Oxides

In situ generation and growth behavior of alpha-Fe nanocrystals by electron beam induced deposition using iron pentacarbonyl

Zhang, W., Shimojo, M., Takeguchi, M., Che, R. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 164-165 2 p. 1595265

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanocrystals
Electron beams
Iron

Mapping of phase distribution in electron holography with a stage-scanning system

Lei, D., Mitsuishi, K., Harada, K., Shimojo, M., Ju, D. & Takeguchi, M., 2013, Materials Science Forum. Vol. 750. p. 152-155 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron holography
Holograms
holography
Electron optics
Scanning
2 Citations (Scopus)

Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystallization
Molecular dynamics
Plastic deformation
Metals
Computer simulation

On proximity effect in electron beam induced deposition

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 154-155 2 p. 1595260

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beams

Position controlled fabrication of metal nanostructures with focused electron beam

Furuya, K., Shimojo, M., Takeguchi, M., Song, M., Mitsuishi, K. & Tanaka, M., 2008, TMS Annual Meeting. Vol. 1. p. 105-110 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beams
Nanostructures
Gases
Metals
electron beams

Potential distribution in resistivity measurement for nanorods formed by electron beam induced deposition

Takeguchi, M., Shimojo, M., Tanaka, M., Mitsuishi, M., Che, R., Zhang, W. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 232-233 2 p. 1595299

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanorods
Electron beams

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, Vol. 833. p. 215-221 7 p. (Materials Science Forum; vol. 833).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron holography
Fresnel diffraction
Holograms
holography
Diffraction

Resistivity measurements of nanorods formed by electron beam-induced deposition

Shimojo, M., Takeguchi, M., Che, R., Zhang, W., Tanaka, M., Mitsuishi, K. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 158-159 2 p. 1595262

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanorods
Electron beams

Resolution in nanofabrication by electron-beam induced deposition combined with low energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 118-119 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanotechnology
Electron beams
Masks
Ions
Deposits

TEM characterization of microstructure and composition of nanostructures formed by electron beam induced deposition with tetrakis(trifluorophoshite)- metal precursors

Takeguchi, M., Shimojo, M., Tanaka, M., Mitsuishi, K. & Furuya, K., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 176-177 2 p. 4456161

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beams
Nanostructures
Transmission electron microscopy
Microstructure
Metals