• 2447 Citations
  • 25 h-Index
1989 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 2447 Citations
  • 25 h-Index
  • 299 Article
  • 26 Conference contribution
  • 3 Chapter
Filter
Conference contribution
Conference contribution

Application of scanning confocal electron microscopy to nanomaterials and the improvement in resolution by image processing

Zhang, X., Takeguchi, M., Hashimoto, A., Mitsuishi, K. & Shimojo, M., 2011, Materials Science Forum. Vol. 675 677. p. 259-262 4 p. (Materials Science Forum; vol. 675 677).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanostructures formation by electron beam induced deposition at the apex of tungsten needle tip

Che, R. C., Takeguchi, M., Shimojo, M., Zhang, W. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 178-179 2 p. 1595272

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterization of magnetic nanostructures fabricated by electron beam induced-chemical vapor deposition with iron carbonyl gas

Takeguchi, M., Shimojo, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 62-63 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Kahn, H., Boer, M., Judy, M. & Spearing, S. (eds.). Vol. 657.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electron beam-induced nano-deposition using a transmission electron microscope

Shimojo, M., Mitsuishi, K., Tanaka, M., Song, M. & Furuya, K., 2005, Materials Science Forum. Vol. 480-481. p. 129-132 4 p. (Materials Science Forum; vol. 480-481).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel

Inamura, T., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fabrication and characterization of nano-dots produced by electron beam induced deposition using metal carbonyls

Shimojo, M., Takeguchi, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 144-145 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of iron oxide nanostructures by electron beam-induced deposition

Shimojo, M., Takeguchi, M., Mitsuishi, K., Tanaka, M. & Furuya, K., 2007, Materials Science Forum. PART 2 ed. Vol. 561-565. p. 1101-1104 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 52-61 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Fatigue properties for micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 247-252 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Fatigue testing machine of micro-sized specimens for MEMS applications

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 241-246 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

38 Citations (Scopus)

Formation of iron nano-dots by electron beam induced deposition using an ultrahigh vacuum transmission electron microscope

Tanaka, M., Chu, F., Shimojo, M., Takeguchi, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 60-61 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Formation of nano-sized crystals during plastic deformation in amorphous alloys

Ogura, A., Sato, M., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Fracture behavior of micro-sized Ni-P amorphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 605. p. 273-278 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Fracture behavior of micro-sized specimens with fatigue pre-crack prepared from a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 ed. American Society for Testing and Materials, p. 72-81 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Gold seeds arrangement on a nanoporous anodic aluminum oxide membrane by centrifugal force

Chu, F., Tanaka, M., Shimojo, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 212-213 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

In situ generation and growth behavior of alpha-Fe nanocrystals by electron beam induced deposition using iron pentacarbonyl

Zhang, W., Shimojo, M., Takeguchi, M., Che, R. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 164-165 2 p. 1595265

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mapping of phase distribution in electron holography with a stage-scanning system

Lei, D., Mitsuishi, K., Harada, K., Shimojo, M., Ju, D. & Takeguchi, M., 2013, Materials Science Forum. Vol. 750. p. 152-155 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (eds.). Vol. 634.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

On proximity effect in electron beam induced deposition

Mitsuishi, K., Shimojo, M., Takeguchi, M., Tanaka, M. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 154-155 2 p. 1595260

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position controlled fabrication of metal nanostructures with focused electron beam

Furuya, K., Shimojo, M., Takeguchi, M., Song, M., Mitsuishi, K. & Tanaka, M., 2008, TMS Annual Meeting. Vol. 1. p. 105-110 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Potential distribution in resistivity measurement for nanorods formed by electron beam induced deposition

Takeguchi, M., Shimojo, M., Tanaka, M., Mitsuishi, M., Che, R., Zhang, W. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 232-233 2 p. 1595299

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, Vol. 833. p. 215-221 7 p. (Materials Science Forum; vol. 833).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Resistivity measurements of nanorods formed by electron beam-induced deposition

Shimojo, M., Takeguchi, M., Che, R., Zhang, W., Tanaka, M., Mitsuishi, K. & Furuya, K., 2005, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. Vol. 2005. p. 158-159 2 p. 1595262

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Resolution in nanofabrication by electron-beam induced deposition combined with low energy ion milling

Mitsuishi, K., Shimojo, M., Tanaka, M., Takeguchi, M. & Furuya, K., 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 118-119 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TEM characterization of microstructure and composition of nanostructures formed by electron beam induced deposition with tetrakis(trifluorophoshite)- metal precursors

Takeguchi, M., Shimojo, M., Tanaka, M., Mitsuishi, K. & Furuya, K., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 176-177 2 p. 4456161

Research output: Chapter in Book/Report/Conference proceedingConference contribution