• 37 Citations
  • 3 h-Index
20032019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 37 Citations
  • 3 h-Index
  • 19 Article
  • 16 Conference contribution
  • 1 Paper
2019

Automating the mold-material grinding process

Sawa, T., 2019 Jan 1, In : International Journal of Automation Technology. 13, 6, p. 722-727 6 p.

Research output: Contribution to journalArticle

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)
2017

A study of dry drilling method on chromium molybdenum steel

Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I., 2017, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.

Research output: Contribution to journalArticle

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (eds.). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Performance of diamond-like carbon coated tool in dry cutting of aluminum alioys

Yokota, T., Sawa, T. & Yokouchi, M., 2015 Jun 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 6, p. 604-609 6 p.

Research output: Contribution to journalArticle

2014

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, In : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

Research output: Contribution to journalArticle

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 Jan 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (eds.). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; vol. 1017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 Apr 1, In : Precision Engineering. 38, 2, p. 365-370 6 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2013

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 Oct 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of electric rust preventive machining method system - safe water using for machining fluid: Complete removal of bacteria (Enterobacter aerogenes)-

Nishikawa, N., Omoe, K., Murakami, K., Sato, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 Dec 1, In : International Journal of Precision Engineering and Manufacturing. 14, 6, p. 897-902 6 p.

Research output: Contribution to journalArticle

Effect of alcohol aqueous solution mist in turning of aluminum alloy using DLC coated tool

Yokota, T., Sawa, T., Yokouchi, M. & Morita, N., 2013 Jan, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 79, 1, p. 81-86 6 p.

Research output: Contribution to journalArticle

Open Access
2012

Cutting performance of different types of diamond-like carbon coatings

Yokota, T., Sawa, T. & Yokouchi, M., 2012 Dec 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 173-176 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of adjusted synthesized water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 373-381 9 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of deionized refined water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 365-372 8 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Improvement of electric rust preventive chip sedimentation system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 979-984 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of electric rust preventive machining method - Optimization of water recycle system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 973-978 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of the combination of DLC film and alcohol mist in turning of aluminum alloy

Yokota, T., Sawa, T. & Yokouchi, M., 2012 Sep, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 78, 9, p. 777-781 5 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power

Sawa, T., Ikuse, Y., Nishikawa, N., Odaki, T., Tomita, S., Yokota, T. & Yokouchi, M., 2012 Dec 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 27-30 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011
Open Access

Formulation of grinding force of fine-ceramics in constant-cut surface grinding

Sawa, T., Ikuse, Y., Unno, K. & Morita, N., 2010 May, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 76, 5, p. 567-571 5 p.

Research output: Contribution to journalArticle

Open Access
2009

Basic study on the development of the general purpose vertical milling machine for educational skill training

Sawa, T., Okabe, M., Siga, A., Mutoh, M., Kurihara, T. & Unno, K., 2009 Aug 7, In : Key Engineering Materials. 407-408, p. 155-158 4 p.

Research output: Contribution to journalArticle

Development of polishingless ultra-smoothness grinding method (3rd report) -Influence of normal feed-

Yasui, H., Sakamoto, R., Tanaka, Y., Yamamoto, Y. & Sawa, T., 2008 Nov, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 74, 11, p. 1188-1192 5 p.

Research output: Contribution to journalArticle

Open Access
2006

Influences of surface roughness of rake face on cutting performance in ductile materials

Takekazu, S., Shinichi, T., Masaki, W., Masayuki, O. & Kuniaki, U., 2006 Dec 1, ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology. p. 233-236 4 p. (ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2005

Ultra-smoothness grinding of cemented carbide using newly developed method

Yasui, H., Yamamoto, Y., Miyamoto, K., Furuya, S. & Sawa, T., 2005 Dec 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultra-smoothness grinding of silicon carbide in depth of cut of 1mm

Yasui, H., Yamamoto, Y. & Sawa, T., 2005 Jan 1, p. 599-602. 4 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)
2004

Ultra-smoothness grinding of glass with # 140 metal bond diamond wheel

Sawa, T. & Yasui, H., 2004 Dec 1, Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004. Chen, W., Yamane, Y., Fan, R. & Ochi, A. (eds.). p. 215-218 4 p. (Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2003

Examination of newly developed twin electrode electrolytic dressing method using DC power source - Possibility of application to bronze bond diamond wheel

Translated title of the contribution: Examination of newly developed twin electrode electrolytic dressing method using DC power source - Possibility of application to bronze bond diamond wheelSawa, T., Ikuse, Y., Unno, K. & Yasui, H., 2003 Mar, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 3, p. 412-416 5 p.

Research output: Contribution to journalArticle

Open Access