• 37 Citations
  • 3 h-Index
20032019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 37 Citations
  • 3 h-Index
  • 19 Article
  • 16 Conference contribution
  • 1 Paper
Filter
Conference contribution
2019

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 Jan 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (eds.). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2014

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 Jan 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (eds.). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; vol. 1017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2013

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 Oct 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Cutting performance of different types of diamond-like carbon coatings

Yokota, T., Sawa, T. & Yokouchi, M., 2012 Dec 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 173-176 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of adjusted synthesized water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 373-381 9 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of deionized refined water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Apr 30, Ultra-Precision Machining Technologies. p. 365-372 8 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of electric rust preventive machining method - Improvement of electric rust preventive chip sedimentation system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 979-984 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of electric rust preventive machining method - Optimization of water recycle system

Nishikawa, N., Sato, Y., Andou, F., Sawa, T., Hagihara, Y., Kato, H., Yoshihara, N., Okawai, H., Murase, T., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 Dec 11, Emerging Technology in Precision Engineering XIV. p. 973-978 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Evaluation of the grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and the critical grain holding power

Sawa, T., Ikuse, Y., Nishikawa, N., Odaki, T., Tomita, S., Yokota, T. & Yokouchi, M., 2012 Dec 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 27-30 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2006

Influences of surface roughness of rake face on cutting performance in ductile materials

Takekazu, S., Shinichi, T., Masaki, W., Masayuki, O. & Kuniaki, U., 2006 Dec 1, ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology. p. 233-236 4 p. (ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2005

Ultra-smoothness grinding of cemented carbide using newly developed method

Yasui, H., Yamamoto, Y., Miyamoto, K., Furuya, S. & Sawa, T., 2005 Dec 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2004

Ultra-smoothness grinding of glass with # 140 metal bond diamond wheel

Sawa, T. & Yasui, H., 2004 Dec 1, Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004. Chen, W., Yamane, Y., Fan, R. & Ochi, A. (eds.). p. 215-218 4 p. (Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution