3-D stress analysis using the Jones Matrix image fourier polarimetry technique

Souichirou Katsumata, Kenichi Sakaue, Masahisa Takashi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Although various kinds of optical techniques for the analysis of 3-D stress fields have been proposed up to date, they are still far from being satisfied. The integrated photoelastic technique is widely adopted in the analysis of 3-D stress field over the world including the Jones matrix image Fourier polarimetry Technique in this study. In the previous research, it has been confirmed that three optical parameters which has been related to stress components, can be measured in high accuracy, and the separation of stress components by the Simplex method was examined. Moreover, the authors successfully separated and determined the optical parameters in each laminated thin disk loaded in different directions each other standing on the equivalence theorem in polarimetry. In this paper, the authors evaluate laminated layer 2-D stress fields in a set of 3 sliced disks and compare them with an actual 3-D stress field under an equivalent loading condition. Namely, disks made of quartz 2mm and 3mm in thickness were loaded at several locations and directions to realize 3-D stress field. A 3-D stress field on laminated layers model was loaded in the similar condition. Since the phase difference and azimuth angle are measured in high accuracy, the technique is expected to be an effective technique for the analysis of actual 3-D stress field.

Original languageEnglish
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
EditorsC. Quan, F.S. Chau, A. Asundi, B.S. Wong, C.T. Lim
Pages245-250
Number of pages6
Volume5852 PART I
DOIs
Publication statusPublished - 2005
Externally publishedYes
EventThird International Conference on Experimental Mechanics and Third Conference of the Asian Committee on Experimental Mechanics - Singapore, Singapore
Duration: 2004 Nov 292004 Dec 1

Other

OtherThird International Conference on Experimental Mechanics and Third Conference of the Asian Committee on Experimental Mechanics
CountrySingapore
CitySingapore
Period04/11/2904/12/1

Fingerprint

Polarimeters
stress analysis
polarimetry
Stress analysis
stress distribution
matrices
simplex method
azimuth
equivalence
quartz
theorems
Quartz

Keywords

  • 3-D Photoelastisity
  • Rotation of principal birefringence axes
  • Separation of optical parameter

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Katsumata, S., Sakaue, K., & Takashi, M. (2005). 3-D stress analysis using the Jones Matrix image fourier polarimetry technique. In C. Quan, F. S. Chau, A. Asundi, B. S. Wong, & C. T. Lim (Eds.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 5852 PART I, pp. 245-250). [40] https://doi.org/10.1117/12.621520

3-D stress analysis using the Jones Matrix image fourier polarimetry technique. / Katsumata, Souichirou; Sakaue, Kenichi; Takashi, Masahisa.

Proceedings of SPIE - The International Society for Optical Engineering. ed. / C. Quan; F.S. Chau; A. Asundi; B.S. Wong; C.T. Lim. Vol. 5852 PART I 2005. p. 245-250 40.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Katsumata, S, Sakaue, K & Takashi, M 2005, 3-D stress analysis using the Jones Matrix image fourier polarimetry technique. in C Quan, FS Chau, A Asundi, BS Wong & CT Lim (eds), Proceedings of SPIE - The International Society for Optical Engineering. vol. 5852 PART I, 40, pp. 245-250, Third International Conference on Experimental Mechanics and Third Conference of the Asian Committee on Experimental Mechanics, Singapore, Singapore, 04/11/29. https://doi.org/10.1117/12.621520
Katsumata S, Sakaue K, Takashi M. 3-D stress analysis using the Jones Matrix image fourier polarimetry technique. In Quan C, Chau FS, Asundi A, Wong BS, Lim CT, editors, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 5852 PART I. 2005. p. 245-250. 40 https://doi.org/10.1117/12.621520
Katsumata, Souichirou ; Sakaue, Kenichi ; Takashi, Masahisa. / 3-D stress analysis using the Jones Matrix image fourier polarimetry technique. Proceedings of SPIE - The International Society for Optical Engineering. editor / C. Quan ; F.S. Chau ; A. Asundi ; B.S. Wong ; C.T. Lim. Vol. 5852 PART I 2005. pp. 245-250
@inproceedings{7dcc5487915448bc999b22a75dfceb58,
title = "3-D stress analysis using the Jones Matrix image fourier polarimetry technique",
abstract = "Although various kinds of optical techniques for the analysis of 3-D stress fields have been proposed up to date, they are still far from being satisfied. The integrated photoelastic technique is widely adopted in the analysis of 3-D stress field over the world including the Jones matrix image Fourier polarimetry Technique in this study. In the previous research, it has been confirmed that three optical parameters which has been related to stress components, can be measured in high accuracy, and the separation of stress components by the Simplex method was examined. Moreover, the authors successfully separated and determined the optical parameters in each laminated thin disk loaded in different directions each other standing on the equivalence theorem in polarimetry. In this paper, the authors evaluate laminated layer 2-D stress fields in a set of 3 sliced disks and compare them with an actual 3-D stress field under an equivalent loading condition. Namely, disks made of quartz 2mm and 3mm in thickness were loaded at several locations and directions to realize 3-D stress field. A 3-D stress field on laminated layers model was loaded in the similar condition. Since the phase difference and azimuth angle are measured in high accuracy, the technique is expected to be an effective technique for the analysis of actual 3-D stress field.",
keywords = "3-D Photoelastisity, Rotation of principal birefringence axes, Separation of optical parameter",
author = "Souichirou Katsumata and Kenichi Sakaue and Masahisa Takashi",
year = "2005",
doi = "10.1117/12.621520",
language = "English",
volume = "5852 PART I",
pages = "245--250",
editor = "C. Quan and F.S. Chau and A. Asundi and B.S. Wong and C.T. Lim",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - 3-D stress analysis using the Jones Matrix image fourier polarimetry technique

AU - Katsumata, Souichirou

AU - Sakaue, Kenichi

AU - Takashi, Masahisa

PY - 2005

Y1 - 2005

N2 - Although various kinds of optical techniques for the analysis of 3-D stress fields have been proposed up to date, they are still far from being satisfied. The integrated photoelastic technique is widely adopted in the analysis of 3-D stress field over the world including the Jones matrix image Fourier polarimetry Technique in this study. In the previous research, it has been confirmed that three optical parameters which has been related to stress components, can be measured in high accuracy, and the separation of stress components by the Simplex method was examined. Moreover, the authors successfully separated and determined the optical parameters in each laminated thin disk loaded in different directions each other standing on the equivalence theorem in polarimetry. In this paper, the authors evaluate laminated layer 2-D stress fields in a set of 3 sliced disks and compare them with an actual 3-D stress field under an equivalent loading condition. Namely, disks made of quartz 2mm and 3mm in thickness were loaded at several locations and directions to realize 3-D stress field. A 3-D stress field on laminated layers model was loaded in the similar condition. Since the phase difference and azimuth angle are measured in high accuracy, the technique is expected to be an effective technique for the analysis of actual 3-D stress field.

AB - Although various kinds of optical techniques for the analysis of 3-D stress fields have been proposed up to date, they are still far from being satisfied. The integrated photoelastic technique is widely adopted in the analysis of 3-D stress field over the world including the Jones matrix image Fourier polarimetry Technique in this study. In the previous research, it has been confirmed that three optical parameters which has been related to stress components, can be measured in high accuracy, and the separation of stress components by the Simplex method was examined. Moreover, the authors successfully separated and determined the optical parameters in each laminated thin disk loaded in different directions each other standing on the equivalence theorem in polarimetry. In this paper, the authors evaluate laminated layer 2-D stress fields in a set of 3 sliced disks and compare them with an actual 3-D stress field under an equivalent loading condition. Namely, disks made of quartz 2mm and 3mm in thickness were loaded at several locations and directions to realize 3-D stress field. A 3-D stress field on laminated layers model was loaded in the similar condition. Since the phase difference and azimuth angle are measured in high accuracy, the technique is expected to be an effective technique for the analysis of actual 3-D stress field.

KW - 3-D Photoelastisity

KW - Rotation of principal birefringence axes

KW - Separation of optical parameter

UR - http://www.scopus.com/inward/record.url?scp=28444479151&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=28444479151&partnerID=8YFLogxK

U2 - 10.1117/12.621520

DO - 10.1117/12.621520

M3 - Conference contribution

AN - SCOPUS:28444479151

VL - 5852 PART I

SP - 245

EP - 250

BT - Proceedings of SPIE - The International Society for Optical Engineering

A2 - Quan, C.

A2 - Chau, F.S.

A2 - Asundi, A.

A2 - Wong, B.S.

A2 - Lim, C.T.

ER -