Find Research Outputs

1800

Solid-state synthesis of magnesium thermoelectric alloys via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : MRS Symposium Proceedings. 980 (2007), p. 205-210

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si1-xYx (Y = Ge and Si) thermoelectric materials via bulk mechanical alloying.

R.Song, R. S., Aizawa, T., Yamamoto, A. & Obara, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 347-350

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si from Mg-Si mixture powder.

Kondoh, K., Oginuma, H., Yuasa, E. & Aizawa, T., 1800, In : Materials Transactions.. 42 (2001), p. 1293-1300

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process

Kondoh, K., Yuasa, E. & Aizawa, T., 1800, In : Materials Science Forum.. 419-422 (2003), p. 419-422

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si via bulk mechanical alloying.

Aizawa, T. & Ichige, K-I., 1800, In : Materials Science Forum.. 351 (2000), p. 333-338

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : Mater. Sci. Forum..

Research output: Contribution to journalArticle

Solid-state synthesis of Mg-Si-Ge ternary thermoelectric materials..

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions. 46 [7] (2005), p. 1490-1496

Research output: Contribution to journalArticle

Solid state synthesis of non-equilibrium phase in Mg-Co and Mg-Fe systems via bulk mechanical alloying..

Aizawa, T., Hasehira, K-I. & Nishimura, C., 1800, In : Materials Transactions.. 44 [4] (2003), p. 601-610

Research output: Contribution to journalArticle

Steel Powder Compaction and Forming Analysis.

Tamura, S., Aizawa, T., Mitsuno, T. & Kihara, J., 1800, In : The International Journal of Powder Metallurgy.. 34 [1] (1998), p. 1-11

Research output: Contribution to journalArticle

Structure of surface wave on coarse-grained nickel by acoustic spectro-microscopy.

Yu, Y., Aizawa, T. & Kihara, J., 1800, In : Material Transactions, JIM.. 37 (1996), p. 1690-1698

Research output: Contribution to journalArticle

Superplastic forging analysis by the multi-level modeling.

Aizawa, T., 1800, In : Materials Science Form.. 306 (1999), p. 621-630

Research output: Contribution to journalArticle

Superplastic injection forming of magnesium alloys.

Aizawa, T. & Mabuchi, M., 1800, In : Materials Science Forum.. 357 (2001), p. 35-40

Research output: Contribution to journalArticle

Surface controlled materials evaluation for Al-implanted Ni alloys.

Aizawa, T., Mitsuo, A. & Kihara, J., 1800, In : Nondestructive Characterization of Materials.. VI (1994), p. 13-20

Research output: Contribution to journalArticle

Surface nano-structuring of Zr thin film via Ni-implantation.

Muraishi, S. & Aizawa, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 65-68

Research output: Contribution to journalArticle

Surface reaction of magnesium in Hank's solutions.

Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 349-358

Research output: Contribution to journalArticle

Surface wave velocity determination by using reflection coefficient method on the liquid - anisotropic - solid interface.

Xu, Y. & Aizawa, T., 1800, In : J. Acoustic Society, America.. 107 [3] (2000), p. 1777-1780

Research output: Contribution to journalArticle

Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A220 (1996), p. 8-14

Research output: Contribution to journalArticle

Synthesis of Mg2Ni alloy by bulk mechanical alloying.

Aizawa, T., Kuji, T. & Nakano, H., 1800, In : J. Alloys and Compounds.. 291 (1999), p. 248-253

Research output: Contribution to journalArticle

T. Aizawa, R. Song and A. Yamamoto: Solid state synthesis of ternary thermoelectric magnesium alloy, Mg2Si1-xSnx.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions.. 47 [4] (2006), p. 1058-1065

Research output: Contribution to journalArticle

Texture control of bulk mechanical alloyed Bi-Te thermoelectric materials via shear extrusion.

Kim, S. S. & Aizawa, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 197-200

Research output: Contribution to journalArticle

"The 1992 Asilomar Conversation: A Journey for Sytems Travelers."

Banathy, B. H., Dyer, G., Horiuchi, Y. & Pruzan, P., 1800, In : Default journal. 6(1994), p. 39-56

Research output: Contribution to journalArticle

" The Fuschl Conversation 2002, The Y3K Team Summary Input Paper: Actions and Evolutionary Guidance for Y3K"

Dyer, G., Hammond, D., Horiuchi, Y., Otsubo, M. & Rowl, G., 1800, In : Default journal. 14(2002), p. 91-103

Research output: Contribution to journalArticle

The Fuschl Conversation 2004: Towards Y3K: A 2004 Prespective on Homonisation with Some Emphasis on Educational Systems

Dyer, G., Gelepithis, P. A. M., Horiuchi, Y. & Prasad, K., 1800, In : Administration and Informatics. 17(2005), p. 1-17

Research output: Contribution to journalArticle

The grain size and texture dependence of tensile properties in extruded Mg-9Al-1Zn.

Mabuchi, M., Chino, Y., Iwasaki, H., Aizawa, T. & Higashi, K., 1800, In : Materials Transactions.. 42 [7] (2001), p. 1182-1189

Research output: Contribution to journalArticle

The parallel logic programming system in the FGCS Project and its future directions

Uchida, S., Aiba, A., Rokusawa, K., Chikayama, T. & Hasegawa, R., 1800, In : Parallel Computing.

Research output: Contribution to journalArticle

Thermal and mechanical coupling in granular modeling for metal injection molding.

Iwai, T., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 42 (1994), p. 175-185

Research output: Contribution to journalArticle

Thermodynamic properties of Mg2.0Ni hydrides.

Kuji, T., Nakano, H. & Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 311-314

Research output: Contribution to journalArticle

Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Sceience Forum.

Research output: Contribution to journalArticle

Thermoelectric pn junction prepared on the route of bulk mechanical alloying..

Yang, Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : Default journal.

Research output: Contribution to journalArticle

Thermoelectric properties of anisotropy-controlled p-type Bi-Te-Sb system via bulk mechanical alloying and shear extrusion.

Kim, S. S., Yamamoto, S. & Aizawa, T., 1800, In : J. Alloys and Compounds.. 375 [1-2] (2004), p. 107-113

Research output: Contribution to journalArticle

Thermoelectric properties of Mg2Si1-xSnx systems synthesized by bulk mechanical alloying.

R.Song, R. S., Liu, Y. & Aizawa, T., 1800, In : Chinese J. Aeronautics. 19 (2006), p. S134-S138

Research output: Contribution to journalArticle

Thermoelectric properties of n-type (Bi2Se3)x(Bi2Te3)1-x prepared by bulk mechanical alloying and hot pressing.

Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : J. Alloys and Compounds.. 312 (2000), p. 326-330

Research output: Contribution to journalArticle

Thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1-x prepared via bulk mechanical alloying and hot pressing.

Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In : J. Alloys and Compounds.. 309 (2000), p. 225-228

Research output: Contribution to journalArticle

"The Y3K Problem: Achieving a Better World by the Year 3000."

Brhams, S., Dyer, G., Horiuchi, Y., Jenks, L. & Rowl, G., 1800, In : Default journal. 13(2000), p. 25-54

Research output: Contribution to journalArticle

Three- Dimensional Finite Element Process Simulation for Green Materials with Element Control.

Aizawa, T., Terziyski, J. & Kihara, J., 1800, In : Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 173-180

Research output: Contribution to journalArticle

Three dimensional forging simulations with finite element control.

Terziyski, J., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 45 (1994), p. 75-80

Research output: Contribution to journalArticle

Three dimensional granular modeling for metallic powder compaction and flow analysis.

Tamura, S., Aizawa, T. & Kihara, J., 1800, In : J. Materials Processing Technology.. 42 (1994), p. 175-185

Research output: Contribution to journalArticle

Transcultural Communications: Theory and Practice

Banathy, B. H., Jenlink, P., eds., E. & Horiuchi, Y., 1800, In : Default journal. p. 127-136

Research output: Contribution to journalArticle

Tribological properties of magnesium composite alloy with in-situ synthesized Mg2Si dispersoids.

Kondoh, K., Oginuma, H. & Aizawa, T., 1800, In : Materials Transactions.. 44 [4] (2003), p. 524-530

Research output: Contribution to journalArticle

Tribological property of Mg composites via powder metallurgy process.

Muramatsu, H., Kondoh, K., Aizawa, T. & Yuasa, E., 1800, In : Materials Science Forum.. 419-422 (2003), p. 801-804

Research output: Contribution to journalArticle

Tribology of dry drawing of various metal sheets with use of ceramics tools.

Kataoka, S., Murakawa, M., Aizawa, T. & Ike, H., 1800, In : Surface Coating Technology.. 177-178 (2004), p. 582-590

Research output: Contribution to journalArticle

Ultrasonic Array Sensing for In-Situ NDE in Extrusion Process for Green Ceramics: Nondestructive Evaluation of Ceramics,

Watanabe, T. & Aizawa, T., 1800, In : Ceramic Transactions.. 89 (1998), p. 33-44

Research output: Contribution to journalArticle