Find Research outputs

2020

Decoupling and Sequential Array Antennas - Effects of Coplanar Feedline on Radiation Characteristics

Hirose, K., Kikkawa, Y. & Nakano, H., 2020 Mar, In: IEEE Antennas and Wireless Propagation Letters. 19, 3, p. 423-427 5 p., 8979441.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Degree Sum Condition for the Existence of Spanning k-Trees in Star-Free Graphs

Furuya, M., Maezawa, S. I., Matsubara, R., Matsuda, H., Tsuchiya, S. & Yashima, T., 2020, (Accepted/In press) In: Discussiones Mathematicae - Graph Theory.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Design and implementation of an online leadership education

Maruyama, T. & Inoue, M., 2020 Dec 8, Proceedings of 2020 IEEE International Conference on Teaching, Assessment, and Learning for Engineering, TALE 2020. Mitsuhara, H., Goda, Y., Ohashi, Y., Rodrigo, M. M. T., Shen, J., Venkatarayalu, N., Wong, G., Yamada, M. & Chi-Un Lei, L. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 930-933 4 p. 9368431. (Proceedings of 2020 IEEE International Conference on Teaching, Assessment, and Learning for Engineering, TALE 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Designing Sustainable Healthcare Service Based on Dynamic Extraction of Requirements Hidden from User's Language

Hirata, S., 2020 May, 2nd IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability 2020, ECBIOS 2020. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 145-146 2 p. 9203723. (2nd IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability 2020, ECBIOS 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Design of Ad Hoc Wireless Mesh Networks Formed by Unmanned Aerial Vehicles with Advanced Mechanical Automation

Shinkuma, R. & Mandayam, N. B., 2020 May, Proceedings - 16th Annual International Conference on Distributed Computing in Sensor Systems, DCOSS 2020. Institute of Electrical and Electronics Engineers Inc., p. 288-295 8 p. 9183511. (Proceedings - 16th Annual International Conference on Distributed Computing in Sensor Systems, DCOSS 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Design of an HMI System Promoting Smooth and Safe Transition to Manual from Level 3 Automated Driving

Kasuga, N., Tanaka, A., Miyaoka, K. & Ishikawa, T., 2020 Jan 1, In: International Journal of Intelligent Transportation Systems Research. 18, 1

Research output: Contribution to journal › Article › peer-review

Design of N-path notch filter circuits for hum noise suppression in biomedical signal acquisition

Afifah, K. & Retdian, N., 2020 Oct 1, In: IEICE Transactions on Electronics. E103C, 10, p. 480-488 9 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Design of zirconium quaternary system alloys and their properties

Ashida, M., Tsutsumi, Y., Homma, K., Chen, P., Shimojo, M. & Hanawa, T., 2020, In: Materials Transactions. 61, 4, p. 776-781 6 p.

Research output: Contribution to journal › Article › peer-review

Detail plans and preparations for the science operations of the XRISM mission

Terada, Y., Holland, M., Loewenstein, M., Tashiro, M., Takahashi, H., Nobukawa, M., Mizuno, T., Tamura, T., Uno, S., Watanabe, S., Baluta, C., Burns, L., Ebisawa, K., Eguchi, S., Fukazawa, Y., Hayashi, K., Iizuka, R., Katsuda, S., Kitaguchi, T., Kubota, A. & 18 others, Miller, E., Mukai, K., Nakashima, S., Nakazawa, K., Odaka, H., Ohno, M., Ota, N., Sato, R., Sugawara, Y., Shidatsu, M., Tamba, T., Tanimoto, A., Terashima, Y., Tsuboi, Y., Uchida, Y., Uchiyama, H., Yamauchi, S. & Yaqoob, T., 2020, Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray. den Herder, J-W. A., Nikzad, S. & Nakazawa, K. (eds.). SPIE, 114445E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11444).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Detecting Suspicious Objects with a Humanoid Robot Having a Metal Detector

Matsushima, S., Tsujita, T. & Abiko, S., 2020 Jan, Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, SII 2020. Institute of Electrical and Electronics Engineers Inc., p. 832-837 6 p. 9025870. (Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, SII 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Detection and Tracking of Moving Objects at Road Intersections Using a 360-Degree Camera for Driver Assistance and Automated Driving

Premachandra, C., Ueda, S. & Suzuki, Y., 2020, In: IEEE Access. 8, p. 135652-135660 9 p., 9146556.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Determination of lactate by sequential injection analysis using a fluoride ion-selective electrode detector

Takahashi, Y. & Masadome, T., 2020 Nov 5, In: Denki Kagaku. 88, 6, p. 522-524 3 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Determination of polyhexamethylene biguanide hydrochloride using a lactone-rhodamine B-based fluorescence optode

Funaki, A., Horikoshi, Y., Kobayashi, T. & Masadome, T., 2020, In: Molecules. 25, 2, 262.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Detoxificación enzimática de cianuro mediante el uso de una dihidratasa parcialmente purificada de la cepa serratia marcescens aq07

Karamba, K. I., Sabullah, M. K., Zulkharnain, A., Gomez-Fuentes, C. & Ahmad, S. A., 2020 May 1, In: Revista Mexicana de Ingeniera Qumica. 19, 2, p. 717-730 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

Development of a fast heat-transport system utilizing PCM and heat pipes

Ono, N., 2020 Aug, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 106, 8, p. 564-570 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Development of a Lightweight Deformable Surface Mechanism (DSM) by Applying Shape-Memory Alloy (SMA) and the Sponge for Handling Objects

Zhang, P., Saito, N., Shigemune, H. & Sugano, S., 2020 Oct 11, 2020 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2020. Institute of Electrical and Electronics Engineers Inc., Vol. 2020-October. p. 1406-1411 6 p. 9283459

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Development of an Automated Camera-Based Drone Landing System

Demirhan, M. & Premachandra, C., 2020, In: IEEE Access. 8, p. 202111-202121 11 p., 9245521.

Research output: Contribution to journal › Article › peer-review

Open Access

6 Citations (Scopus)

Development of an optode detector for determination of anionic surfactants by flow injection analysis

Sato, R., Yamada, R. & Masadome, T., 2020, In: Analytical Sciences. 36, 3, p. 379-383 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Development of a Programming Course for Senior Citizens Taught by Senior Citizens

Ohashi, Y., Yamachi, H., Murokoshi, Y., Kumeno, F. & Tsujimura, Y., 2020 Mar 28, Proceedings of the 2020 8th International Conference on Information and Education Technology, ICIET 2020. Association for Computing Machinery, p. 18-23 6 p. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access

2 Citations (Scopus)

Development of a sit-to-stand assistance chair for elderly people

Aharari, A. & Yang, W. S., 2020, In: International Journal of Reasoning-based Intelligent Systems. 12, 2, p. 149-155 7 p.

Research output: Contribution to journal › Article › peer-review

Development of a surgical instrument with a single strain area for measuring biaxial cutting forces

Suzuki, M., Abiko, S., Tsujita, T. & Abe, K., 2020 Jul, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. Institute of Electrical and Electronics Engineers Inc., p. 1613-1618 6 p. 9158871. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Development of fast-acting neutral-typed soil improvement material in classification of soils

Ide, K., Miura, T., Yamada, Y., Takada, N., Mitsumoto, J. & Inazumi, S., 2020, In: Zairyo/Journal of the Society of Materials Science, Japan. 69, 1, p. 69-74 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Development of pulsed electro-acoustic measurement system with high positional resolution at high temperature using P(VDF/TrFE) thin film

Aoki, H., Nojiri, Y., Enoki, K., Miyake, H., Tanaka, Y. & Nishikawa, H., 2020 Sep 13, Proceedings of 2020 International Symposium on Electrical Insulating Materials, ISEIM 2020. Institute of Electrical Engineers of Japan, p. 293-296 4 p. (Proceedings of the International Symposium on Electrical Insulating Materials; vol. 2020-September).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

DGEMM using tensor cores, and its accurate and reproducible versions

Mukunoki, D., Ozaki, K., Ogita, T. & Imamura, T., 2020, High Performance Computing - 35th International Conference, ISC High Performance 2020, Proceedings. Sadayappan, P., Chamberlain, B. L., Juckeland, G. & Ltaief, H. (eds.). Springer, p. 230-248 19 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 12151 LNCS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access

2 Citations (Scopus)

Dielectrophoretic devices fabricated by proton beam writing for concentration, assembly, and detection of nanoparticles

Kimura, T., Kawashima, R., Yamamoto, K., Uchida, S., Ishii, Y. & Nishikawa, H., 2020 Sep 13, Proceedings of 2020 International Symposium on Electrical Insulating Materials, ISEIM 2020. Institute of Electrical Engineers of Japan, p. 245-248 4 p. (Proceedings of the International Symposium on Electrical Insulating Materials; vol. 2020-September).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Differential contributions of fatigue-induced strength loss and slowing of angular velocity to power loss following repeated maximal shortening contractions

Akagi, R., Hinks, A., Davidson, B. & Power, G. A., 2020 Feb 1, In: Physiological reports. 8, 3, e14362.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

Dimensionality and superconducting parameters of YBa₂Cu₃O_7−d/(WO₃ NPs)_x composites deduced from excess conductivity analysis

Almessiere, M. A., Hannachi, E., Slimani, Y., Yasin, G., Mumtaz, M., Koblischka, M. R., Koblischka-Veneva, A., Manikandan, A. & Baykal, A., 2020 Mar 1, In: Materials Chemistry and Physics. 243, 122665.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Direct and selective electrodeposition of palladium from betainium bis(trifluoromethanesulfonyl)imide ionic liquid phase after solvent extraction together with other platinum group metals

Kono, S., Takao, K. & Arai, T., 2020, In: Transactions of the Atomic Energy Society of Japan. 19, 2, p. 76-84 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Direct etching and implanted metalization in soft matter

Ichikawa, K., Fukuyama, Y., Maeda, S. & Yamanishi, Y., 2020, 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017. Chemical and Biological Microsystems Society, p. 421-422 2 p. (21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Directionality Effect on Strength of Partial-Joint-Penetration Groove Weld Joints

Luo, P., Asada, H., Uang, C. M. & Tanaka, T., 2020 Apr 1, In: Journal of Structural Engineering. 146, 4, 04020030.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Direct Measurement of the Cosmic-Ray Carbon and Oxygen Spectra from 10 GeV/ n to 2.2 TeV/ n with the Calorimetric Electron Telescope on the International Space Station

(CALET Collaboration), 2020 Dec 18, In: Physical Review Letters. 125, 25, 251102.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Direct Torque Control for PMSM by Using Flux Sensor

Kawashima, N. & Akatsu, K., 2020 Nov 24, 23rd International Conference on Electrical Machines and Systems, ICEMS 2020. Institute of Electrical and Electronics Engineers Inc., p. 355-358 4 p. 9291230. (23rd International Conference on Electrical Machines and Systems, ICEMS 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Discussion on shear properties and flow model in screw tightening lubricant PIB under low sliding speed conditions

Otsu, T., Komatsu, K. & Hashimura, S., 2020 Nov, In: Tribology International. 151, 106474.

Research output: Contribution to journal › Article › peer-review

Disposable robotic finger driven pneumatically by flat tubes and a hollow link mechanism

Tanaka, J. & Matsuhira, N., 2020, In: Journal of Robotics and Mechatronics. 32, 5, p. 958-976 19 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Distance control between an object and an end effector for contactless surface tracking works by a humanoid robot

Matsushima, S., Tsujita, T. & Abiko, S., 2020 Jul, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. Institute of Electrical and Electronics Engineers Inc., p. 1724-1729 6 p. 9159007. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Distributed Processing Allocation of Machine Learning in Wireless Sensor Networks

Motoyama, J., Ooka, R., Miyoshi, T., Yamazaki, T. & Asaka, T., 2020 Sep 28, 2020 IEEE International Conference on Consumer Electronics - Taiwan, ICCE-Taiwan 2020. Institute of Electrical and Electronics Engineers Inc., 9258076. (2020 IEEE International Conference on Consumer Electronics - Taiwan, ICCE-Taiwan 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Does the combination of different pitches and the absence of pitch type information influence timing control during batting in baseball?

Kidokoro, S., Matsuzaki, Y. & Akagi, R., 2020, In: PLoS ONE. 15, 3, e0230385.

Research output: Contribution to journal › Article › peer-review

Open Access

Drazin inverse conditions for stability of positive singular systems

Ding, X. & Zhai, G., 2020 Sep, In: Journal of the Franklin Institute. 357, 14, p. 9853-9870 18 p.

Research output: Contribution to journal › Article › peer-review

Drop impact analysis and shock absorbing motion of a life-sized one-legged robot with soft outer shells and a flexible joint

Hidaka, Y., Tsujita, T. & Abiko, S., 2020 Jul, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. Institute of Electrical and Electronics Engineers Inc., p. 928-933 6 p. 9158856. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Dual real-time in vivo monitoring system of the brain-gut axis

Nishimura, Y., Fukuda, Y., Okonogi, T., Yoshikawa, S., Karasuyama, H., Osakabe, N., Ikegaya, Y., Sasaki, T. & Adachi, T., 2020 Apr 2, In: Biochemical and Biophysical Research Communications. 524, 2, p. 340-345 6 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Dynamic indoor space reconstruction using temporal point clouds

Nozaki, R. & Nakagawa, M., 2020.

Research output: Contribution to conference › Paper › peer-review

Dynamic indoor space reconstruction using temporal point clouds

Nozaki, R. & Nakagawa, M., 2020 Jan 1.

Research output: Contribution to conference › Paper › peer-review

Eagle Eye for ER Doctor: Basic Study on Drone based TeleMonitoring System for an Inaccessible Area

Karunarathna, Y., Kawanaka, H., Premachandra, C. & Tsuruoka, S., 2020 Mar 6, Proceedings of International Conference on Image Processing and Robotics, ICIPRoB 2020. Sudantha, B. H. (ed.). Institute of Electrical and Electronics Engineers Inc., 9367347. (Proceedings of International Conference on Image Processing and Robotics, ICIPRoB 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Early career researchers present their latest work at the virtual conference on thermoelectrics 2020

Zevalkink, A., Gorai, P., Mele, P., Narducci, D. & Pei, Y., 2020 Nov 23, In: ACS Applied Energy Materials. 3, 11, p. 10278-10281 4 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

Efecto de metales pesados y otros xenobioticos en la biodegradación de residuos de aceite de canola mediante la cepa adaptada al frío Rhodococcus sp. AQ5-07

Ibrahim, S., Zulkharnain, A., Zahri, K. N. M., Lee, G. L. Y., Convey, P., Gomez-Fuentes, C., Sabri, S., Khalil, K. A., Alias, S. A., Gonzalez-Rocha, G. & Ahmad, S. A., 2020 Sep 1, In: Revista Mexicana de Ingeniera Quimica. 19, 3, p. 1041-1052 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

Effect of Drying Temperature to the Thin Layer Drying Model of Sago Starch

Kamal, M. M., Baini, R., Fong, L. S., Hussain, M. H. M. & Mohamaddan, S., 2020, Intelligent Manufacturing and Energy Sustainability - Proceedings of ICIMES 2019. Reddy, A. N. R., Marla, D., Simic, M., Favorskaya, M. N. & Satapathy, S. C. (eds.). Springer, p. 575-582 8 p. (Smart Innovation, Systems and Technologies; vol. 169).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of gold layer thickness on the low-temperature crystallization process of germanium thin films by gold-induced crystallization

Sunthornpan, N., Tauchi, K., Tezuka, N. & Kyuno, K., 2020 Aug 1, In: Japanese Journal of Applied Physics. 59, 8, 080904.

Research output: Contribution to journal › Article › peer-review

Effect of impurity elements on localized corrosion of zirconium in chloride containing environment

Tsutsumi, Y., Muto, I., Nakano, S., Tsukada, J., Manaka, T., Chen, P., Ashida, M., Sugawara, Y., Shimojo, M., Hara, N., Katayama, H. & Hanawa, T., 2020 Nov, In: Journal of the Electrochemical Society. 167, 14, 141507.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Effect of infill pattern and density on tensile properties of 3d printed polylactic acid parts via fused deposition modeling (FDM)

Derise, M. R. & Zulkharnain, A., 2020, In: International Journal of Mechanical and Mechatronics Engineering. 20, 2, p. 54-63 10 p.

Research output: Contribution to journal › Article › peer-review

Effect of laser temperature control on Brillouin optical correlation-domain reflectometry

Mizuno, Y., Motoishi, N., Noda, K., Lee, H. & Nakamura, K., 2020 May 1, In: Applied Physics Express. 13, 5, 052001.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Filters for Research output

Search results