Find Research outputs

Search results

• 1800

  "Future Life-long Learning: A Provisional Model for the Creation of Value."

  Brown, S., Chroust, G., Dyer, G., Horiuchi, Y., Metcalf, G., Rhee, M., Rhee, Y. P., Rowl, G. & Tagliaferri, C., 1800, In: Default journal. 11(1998), p. 59-68

  Research output: Contribution to journal › Article › peer-review

• Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

  Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1312-1316

  Research output: Contribution to journal › Article › peer-review

• Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

  Xu, Y. & Aizawa, T., 1800, In: Ceramic Transaction.. 89 (1998), p. 205-216

  Research output: Contribution to journal › Article › peer-review

• Granular Modeling Approach to Electro-Packaging Materials.

  Aizawa, T., Iwai, T. & Kihara, J., 1800, In: J. Mechanics of Materials.. (1998), p. 83-91

  Research output: Contribution to journal › Article › peer-review

• High speed bulk mechanical alloying of Cu/Ag/Co systems.

  Kobayashi, O., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM. 37 (1996) 1497-1504..

  Research output: Contribution to journal › Article › peer-review

• Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0 - 0.5) alloys prepared by bulk mechanical alloying..

  Kuji, T., Nakano, H. & Aizawa, T., 1800, In: J. Alloys and Compounds. 330-332 (2002), p. 590-596

  Research output: Contribution to journal › Article › peer-review

• Hydrogen absorption of nanocrystalline palladium.

  Kuji, T., Matsumura, Y., Uchida, H. & Aizawa, T., 1800, In: J. Alloys and Compounds.. 330-332 (2002), p. 718-722

  Research output: Contribution to journal › Article › peer-review

• "Idealized Systems Design for Making Japanese University Students Better International Communicators,"

  Horiuchi, Y., 1800, In: Default journal. 9(1996), p. 17-23

  Research output: Contribution to journal › Article › peer-review

• Identification of Zinc Finger Proteins Bound to a Silencer Region in the Rat Glutathione Transferase P Gene.

  Tanabe, A., Oshima, K., Osada, S., Nishihara, T. & Imagawa, M., 1800, In: Biol. Pharm. Bull.. 24, p. 970-974

  Research output: Contribution to journal › Article › peer-review

• Improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Science and Engineering. A308 (2001), p. 283-287

  Research output: Contribution to journal › Article › peer-review

• Improvement of crashworthiness in ultra light-weight metallic foam by heat-treatment for microstructural modification of base material.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Transactions.. 42 [10] (2001), p. 2087-2092

  Research output: Contribution to journal › Article › peer-review

• Improvement of friction and wear performance of titanium nitride films by chlorine ion implantation.

  Mitsuo, A. & Aizawa, T., 1800, In: materials transactions, jim. 40 [12] (1999), p. 1361-1366

  Research output: Contribution to journal › Article › peer-review

• Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: J. American Ceramic Society.. 79 (1996), p. 2221-2223

  Research output: Contribution to journal › Article › peer-review

• In-situ solid-state synthesis of Mg2Si/MgO/Mg composites.

  Du, W., Kondoh, K., Yuasa, E., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Science Forum.. 419-422 (2003), p. 783-788

  Research output: Contribution to journal › Article › peer-review

• In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

  Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [5] (2003), p. 981-985

  Research output: Contribution to journal › Article › peer-review

• Introduction to CAL (Extended Abstract)

  Sakai, K. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｍｅｍｏ　ＴＭ０４.

  Research output: Contribution to journal › Article › peer-review

• "It's a Small World Idea Book Team: 1999 Asilomar Summary."

  Horiuchi, Y., Jenks, L. & Park, S-H., 1800, In: Default journal. 12(2000), p. 55-62

  Research output: Contribution to journal › Article › peer-review

• "It's a Small World Ideabook Team "Into the Rabbit Hole" Board Game Status Report: A Spiral Connecting 2002 and 2003 ISI Asilomar Conversations."

  Devon, C., Gill, P., Jenks, L. & Horiuchi, Y., 1800, In: Default journal. 16(2003), p. 101-10

  Research output: Contribution to journal › Article › peer-review

• Laser shock loading device for real time evaluation of shock induced reaction.

  Ito, K. & Aizawa, T., 1800, In: J. Materials Processing Technology.. 85 (1998), p. 91-96

  Research output: Contribution to journal › Article › peer-review

• Leaky pseudo surface wave on the water - Si (110) interface.

  Xu, Y. & Aizawa, T., 1800, In: Physical Letters.. A 260 (1999), p. 512-515

  Research output: Contribution to journal › Article › peer-review

• Low temperature sintering of dense alumina wire by green microstructure control.

  Du, W., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Proc. 2000 Powder Metallurgy World Congress..

  Research output: Contribution to journal › Article › peer-review

• Magnesium matrix composite with solid-state synthesized Mg2Si dispersoids.

  Kondoh, K., Oginuma, H., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Transactions.. 44 [4] (2003), p. 611-618

  Research output: Contribution to journal › Article › peer-review

• Magnetic powder forming simulation subjected to pressing in magnetic Field.

  Tamura, S., Aizawa, T. & Kihara, J., 1800, In: Default journal. 45 (1994), p. 353-358

  Research output: Contribution to journal › Article › peer-review

• Measurement of ultrasonic attenuation in material surface layer by spectroscopy technique with ultrasonic reflectivity measurement.

  Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In: JSME International Journal.. (1995), p. 393-402

  Research output: Contribution to journal › Article › peer-review

• Mechanical alloying behavior in molybdenum-silicon system.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: Materials Science Forum.. 235 (1997), p. 157-162

  Research output: Contribution to journal › Article › peer-review

• Mechanically Induced Reaction for Solid-State Synthesis of Mg2Si and Mg2Sn

  Aizawa, T. & Song, R., 1800, In: J. Intermetallics. p. 382-391

  Research output: Contribution to journal › Article › peer-review

• Mechanical properties of bulk sintered titanium nitride ceramics.

  Kuwahara, H., Mazaki, N., Takahashi, M., Watanabe, T., Yang, X. & Aizawa, T., 1800, In: Materials Science and Engineering.. A 319-321 (2001), p. 687-691

  Research output: Contribution to journal › Article › peer-review

• Mesoscopic Modeling for Superplasticity.

  mechanics, I. T., equation, T. S., method, T. E., modeling., A. M. & Aizawa, T., 1800, In: Materials Science Forum.. 233-234 (1997), p. 37-46

  Research output: Contribution to journal › Article › peer-review

• Microscopic determination of surface wave velocities in heat treated steels by ultrasonic reflectivity measurement.

  Ihara, I., Aizawa, T. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 87-95

  Research output: Contribution to journal › Article › peer-review

• Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

  Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A290 (2000), p. 139-144

  Research output: Contribution to journal › Article › peer-review

• Microstructure model for hot deformation and creep behavior on the basis of homogenization theory.

  Aizawa, T., Tsumori, F. & Prawato, Y., 1800, In: Advanced Technology of Plasticity.. 2 (2002), p. 1213-1218

  Research output: Contribution to journal › Article › peer-review

• Micro-XPS analysis of slide-tested TiN films with/without Cl+ implantation.

  Yoshitake, M., Akhadejdamrong, T., Aizawa, T. & Yoshihara, K., 1800, In: Surface and Interface Analysis.. 34 (2002), p. 698-702

  Research output: Contribution to journal › Article › peer-review

• Modeling creep damage based on the real microstructure.

  Prawato, Y. & Aizawa, T., 1800, In: J. Practical Failure Analysis.. 2 [6] (2002), p. 68-79

  Research output: Contribution to journal › Article › peer-review

• Morphology-free processing of magnesium alloys.

  Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In: Materials Transactions..

  Research output: Contribution to journal › Article › peer-review

• MR2719766

  Kameko, M., 1800, In: Mathematical Reviews.

  Research output: Contribution to journal › Article › peer-review

• Nano-crystallization by high speed mechanical alloying.

  Aizawa, T. & Kihara, J., 1800, In: Powder Metallurgy World Congress-94.. (1994), p. 1357-1360

  Research output: Contribution to journal › Article › peer-review

• Nano-granulation in Co-Cu system by bulk mechanical alloying.

  Aizawa, T., Cheng, Z., Tokumitsu, K. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 233-241

  Research output: Contribution to journal › Article › peer-review

• Nanogranulation process into magnetoresistant Co-Cu alloy on the route of bulk mechanical alloying.

  Aizawa, T. & Zhoh, C., 1800, In: Materials Science and Engineering.. A285 (2000), p. 1-7

  Research output: Contribution to journal › Article › peer-review

• Nano-structured materials via bulk mechanical alloying..

  Aizawa, T. & Kondoh, K., 1800, In: Scripta Materiala. 44 (2001), p. 1751-1755

  Research output: Contribution to journal › Article › peer-review

• NATIONAL GARDEN PARK DEVELOPMENT PROJECT

  Isamu Koike, I. K. & Taniguchi, T., 1800, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Nondestructive evaluation of Co agglomeration and WC growth in WC/Co superhard alloys.

  Aizawa, T. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 575-583

  Research output: Contribution to journal › Article › peer-review

• Non-equilibration of nanostructured Mg2Ni by bulk mechanical alloying.

  Aizawa, T., Kuji, T. & Nakano, H., 1800, In: Materials Transactions.. 42 (2001), p. 1284-1292

  Research output: Contribution to journal › Article › peer-review

• Nontraditional mechanical alloying by the controlled plastic deformation, flow and fracture processes.

  Aizawa, T., Kihara, J. & Benson, D. J., 1800, In: Materials Transactions, JIM.. 36 (1995), p. 138-149

  Research output: Contribution to journal › Article › peer-review

• Normal and anormal microstructure of plasma nitrided Fe-Cr alloys.

  Granito, N., Kuwahara, H. & Aizawa, T., 1800, In: J. Materials Science.. 37 (2002), p. 835-844

  Research output: Contribution to journal › Article › peer-review

• Parallel Constraint Logic Programming Language GDCC and Its Parallel Constraint Solvers

  Terasaki, S., Hawley, D. J., Sawada, H., Satoh, K., Menju, S., Kawagishi, T., Iwayama, N. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｒｅｐｏｒｔ.

  Research output: Contribution to journal › Article › peer-review

• Phase Separation into Nano-crystalline Nitrides in Ternary　Ti-Si-N System via N Implantation.

  Muraishi, S. & Aizawa, T., 1800, In: Materials Science Forum,. 475-479 (2004), p. 3651-3654

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding as an environmentally benign surface structuring process.

  Aizawa, T. & Kuwahara, H., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1303-1310

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding design for aluminum and aluminum alloys

  Visuttipitukul, P. & Aizawa, T., 1800, In: Surface Engineering. 22, p. 187-195

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding of cold-pressed and BMA-forged Al compacts.

  P.Visuttipitukul, P. V., Aizawa, T., Kondoh, K. & Kuwahara, H., 1800, In: Jpn. J. Powder and Powder Metallurgy.. 49 [11] (2002), p. 1028-1035

  Research output: Contribution to journal › Article › peer-review

• Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution.

  Kuwahara, H., Y.Al-Abdullat, Y. A-A., Mazaki, N., Tsutsumi, S. & Aizawa, T., 1800, In: Materials Transactions.. 42 [7] (2001), p. 1317-1321

  Research output: Contribution to journal › Article › peer-review