Find Research outputs

Search results

• 1800

  Nano-crystallization by high speed mechanical alloying.

  Aizawa, T. & Kihara, J., 1800, In: Powder Metallurgy World Congress-94.. (1994), p. 1357-1360

  Research output: Contribution to journal › Article › peer-review

• Nano-granulation in Co-Cu system by bulk mechanical alloying.

  Aizawa, T., Cheng, Z., Tokumitsu, K. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 233-241

  Research output: Contribution to journal › Article › peer-review

• Nanogranulation process into magnetoresistant Co-Cu alloy on the route of bulk mechanical alloying.

  Aizawa, T. & Zhoh, C., 1800, In: Materials Science and Engineering.. A285 (2000), p. 1-7

  Research output: Contribution to journal › Article › peer-review

• Nano-structured materials via bulk mechanical alloying..

  Aizawa, T. & Kondoh, K., 1800, In: Scripta Materiala. 44 (2001), p. 1751-1755

  Research output: Contribution to journal › Article › peer-review

• NATIONAL GARDEN PARK DEVELOPMENT PROJECT

  Isamu Koike, I. K. & Taniguchi, T., 1800, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Nondestructive evaluation of Co agglomeration and WC growth in WC/Co superhard alloys.

  Aizawa, T. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 575-583

  Research output: Contribution to journal › Article › peer-review

• Non-equilibration of nanostructured Mg2Ni by bulk mechanical alloying.

  Aizawa, T., Kuji, T. & Nakano, H., 1800, In: Materials Transactions.. 42 (2001), p. 1284-1292

  Research output: Contribution to journal › Article › peer-review

• Nontraditional mechanical alloying by the controlled plastic deformation, flow and fracture processes.

  Aizawa, T., Kihara, J. & Benson, D. J., 1800, In: Materials Transactions, JIM.. 36 (1995), p. 138-149

  Research output: Contribution to journal › Article › peer-review

• Normal and anormal microstructure of plasma nitrided Fe-Cr alloys.

  Granito, N., Kuwahara, H. & Aizawa, T., 1800, In: J. Materials Science.. 37 (2002), p. 835-844

  Research output: Contribution to journal › Article › peer-review

• Parallel Constraint Logic Programming Language GDCC and Its Parallel Constraint Solvers

  Terasaki, S., Hawley, D. J., Sawada, H., Satoh, K., Menju, S., Kawagishi, T., Iwayama, N. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｒｅｐｏｒｔ.

  Research output: Contribution to journal › Article › peer-review

• Phase Separation into Nano-crystalline Nitrides in Ternary　Ti-Si-N System via N Implantation.

  Muraishi, S. & Aizawa, T., 1800, In: Materials Science Forum,. 475-479 (2004), p. 3651-3654

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding as an environmentally benign surface structuring process.

  Aizawa, T. & Kuwahara, H., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1303-1310

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding design for aluminum and aluminum alloys

  Visuttipitukul, P. & Aizawa, T., 1800, In: Surface Engineering. 22, p. 187-195

  Research output: Contribution to journal › Article › peer-review

• Plasma nitriding of cold-pressed and BMA-forged Al compacts.

  P.Visuttipitukul, P. V., Aizawa, T., Kondoh, K. & Kuwahara, H., 1800, In: Jpn. J. Powder and Powder Metallurgy.. 49 [11] (2002), p. 1028-1035

  Research output: Contribution to journal › Article › peer-review

• Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution.

  Kuwahara, H., Y.Al-Abdullat, Y. A-A., Mazaki, N., Tsutsumi, S. & Aizawa, T., 1800, In: Materials Transactions.. 42 [7] (2001), p. 1317-1321

  Research output: Contribution to journal › Article › peer-review

• Proceedings of FGCS'92 Workshop on Constraint Logic Programming

  Aiba, A., 1800, In: ICOT Technical Memo.

  Research output: Contribution to journal › Article › peer-review

• Processing and characterization of alumina wire by controlled fracture forming process: (I) Forming behavior and evolution of green microstructure.

  Du, W. B., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A316 (2001), p. 238-247

  Research output: Contribution to journal › Article › peer-review

• Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties.

  Du, W. B., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A316 (2001), p. 248-257

  Research output: Contribution to journal › Article › peer-review

• Progressive steps in the platform science and technology for advanced magnesium alloys..

  Kojima, Y., Aizawa, T., Kamado, S. & Higashi, K., 1800, In: Materials Science Forum. 419-422 (2003), p. 3-20

  Research output: Contribution to journal › Article › peer-review

• "Proposal of Virtual Transportation as an Idealized Alternative in Consumption Society."

  Horiuchi, Y., 1800, In: Systems: Journal of Transdisciplinary Science. 5(2000), p. 61-73

  Research output: Contribution to journal › Article › peer-review

• Protein Structure Prediction Based on Multi-Level Description

  Onizuka, K., Tsuda, H., Ishikawa, M. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｒｅｐｏｒｔ.

  Research output: Contribution to journal › Article › peer-review

• Pseudo surface wave on the (1012) plane of sapphire.

  Xu, Y. & Aizawa, T., 1800, In: J. Applied Physics.. 86 [11] (1999), p. 6507-6511

  Research output: Contribution to journal › Article › peer-review

• Quantitative nondestructive characterization of visco-elastic materials at high pressure.

  Aizawa, T., Ohno, J. & Kihara, J., 1800, In: Composites for the Pressure Vessel Industry.. ASME PVP-302 (1995), p. 121-140

  Research output: Contribution to journal › Article › peer-review

• Quantitative Nondestructive Evaluation of Surface Roughness Using Ultrasonic Reflectivity and Surface Wave Velocity.

  Aizawa, T. & Ihara, I., 1800, In: Ceramic Transaction.. 89 (1998), p. 159-170

  Research output: Contribution to journal › Article › peer-review

• Quantitative nondestructive evaluation on the ceramic coating by the acoustic spectro microscopy.

  Aizawa, T., Ito, M. & Kihara, J., 1800, In: Japanese J. Tribology.. 40-3 (1995), p. 171-179

  Research output: Contribution to journal › Article › peer-review

• Reaction-induced phase separation from supersaturated solid solution to nitride in thin films.

  Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In: Surface Coating Technology.. 188-189 (2004), p. 431-434

  Research output: Contribution to journal › Article › peer-review

• Reaction synthesis of refractory disilicides by mechanical alloying and shock reactive synthesis techniques.

  Yen, B. K., Aizawa, T., Kihara, J. & Sakakibara, N., 1800, In: Materials Science and Engineering. A239-240 (1997), p. 515-521

  Research output: Contribution to journal › Article › peer-review

• Resintering behavior of alumina compact on the route of controlled fracture forming.

  W.B.Du, W. B. D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Default journal. 46 [2] (1999), p. 125-130

  Research output: Contribution to journal › Article › peer-review

• Shock compaction of Al-based nanocrystal materials using on ion-beam device.

  Tsuchida, M., Aizawa, T. & K.Horioka, K. H., 1800, In: J. Materials Processing Technology.. 85 (1998), p. 148-152

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of (Mo, Ti) sillicides from pretreated powders.

  Aizawa, T., Sakakibara, N., Yen, B. K. & Syono, Y., 1800, In: Ceramic Transaction (Innovative Processing and Synthesis of Ceramics). 87 (1997), p. 135-142

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of refractory metal aluminides from a mechanically alloyed precursor.

  Aizawa, T., Asakawa, Y. & Kihara, J., 1800, In: Ann. Chim.. 20 (1995), p. 181-196

  Research output: Contribution to journal › Article › peer-review

• Shock reactive synthesis of TiAl.

  Aizawa, T., Kamenosono, S., Kihara, J., Kato, T., Tanaka, K. & Nakayama, Y., 1800, In: J. Intermetallics.. 3 (1995), p. 369-379

  Research output: Contribution to journal › Article › peer-review

• Simultaneous Determination of Elastic Constants and Crystallographic Orientation in Coarse-Grained Nickel by Acoustic Spectro-Microscopy.

  Xu, Y., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM.38 [6] (1997) 536-545.. 38 [6] (1997), p. 536-545

  Research output: Contribution to journal › Article › peer-review

• Smoothed Particle Modeling for Ceramic Injection Molding.

  Iwai, T., Aizawa, T. & Kihara, J., 1800, In: Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 167-172

  Research output: Contribution to journal › Article › peer-review

• Solid state recycle processing for magnesium alloy wastes via direct hot forging.

  Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In: Materials Transactions.. 43 [3] (2002), p. 322-325

  Research output: Contribution to journal › Article › peer-review

• Solid state recycling of recyclable aluminum wastes with in-process microstructure control.

  Aizawa, T., Luangvaranunt, T. & Kondoh, K., 1800, In: Materials Transaction.. 43 [3] (2002), p. 315-321

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of hydrogen storage Mg2Co alloys via bulk mechanical alloying

  Wang, Y., Aizawa, T. & Nishimura, C., 1800, In: Materials Transactions. 47, p. 1052-1057

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of magnesium alloys.

  Aizawa, T., 1800, In: Materials Science Forum.. 351 (2000), p. 299-310

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of magnesium thermoelectric alloys via bulk mechanical alloying.

  Aizawa, T. & Song, R., 1800, In: MRS Symposium Proceedings. 980 (2007), p. 205-210

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si1-xYx (Y = Ge and Si) thermoelectric materials via bulk mechanical alloying.

  R.Song, R. S., Aizawa, T., Yamamoto, A. & Obara, T., 1800, In: J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 347-350

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si from Mg-Si mixture powder.

  Kondoh, K., Oginuma, H., Yuasa, E. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1293-1300

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process

  Kondoh, K., Yuasa, E. & Aizawa, T., 1800, In: Materials Science Forum.. 419-422 (2003), p. 419-422

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2Si via bulk mechanical alloying.

  Aizawa, T. & Ichige, K-I., 1800, In: Materials Science Forum.. 351 (2000), p. 333-338

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying.

  Aizawa, T. & Song, R., 1800, In: Mater. Sci. Forum..

  Research output: Contribution to journal › Article › peer-review

• Solid-state synthesis of Mg-Si-Ge ternary thermoelectric materials..

  Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Transactions. 46 [7] (2005), p. 1490-1496

  Research output: Contribution to journal › Article › peer-review

• Solid state synthesis of non-equilibrium phase in Mg-Co and Mg-Fe systems via bulk mechanical alloying..

  Aizawa, T., Hasehira, K-I. & Nishimura, C., 1800, In: Materials Transactions.. 44 [4] (2003), p. 601-610

  Research output: Contribution to journal › Article › peer-review

• Steel Powder Compaction and Forming Analysis.

  Tamura, S., Aizawa, T., Mitsuno, T. & Kihara, J., 1800, In: The International Journal of Powder Metallurgy.. 34 [1] (1998), p. 1-11

  Research output: Contribution to journal › Article › peer-review

• Structure of surface wave on coarse-grained nickel by acoustic spectro-microscopy.

  Yu, Y., Aizawa, T. & Kihara, J., 1800, In: Material Transactions, JIM.. 37 (1996), p. 1690-1698

  Research output: Contribution to journal › Article › peer-review

• Superplastic forging analysis by the multi-level modeling.

  Aizawa, T., 1800, In: Materials Science Form.. 306 (1999), p. 621-630

  Research output: Contribution to journal › Article › peer-review

• Superplastic injection forming of magnesium alloys.

  Aizawa, T. & Mabuchi, M., 1800, In: Materials Science Forum.. 357 (2001), p. 35-40

  Research output: Contribution to journal › Article › peer-review