Find Research outputs

Search results

• 2013

  A principle of next generation spintronics motor

  Furukawa, S. & Akatsu, K., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1355-1360 6 p. 6579286. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Spintronics
  • Stators
  • Finite element method
  1 Citation (Scopus)

• A simple unipolar excitation strategy for switched reluctance motors by using PWM current control

  Nakao, N. & Akatsu, K., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1111-1117 7 p. 6579247. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric current control
  • Pulse width modulation
  • Switching frequency
  • Torque
  9 Citations (Scopus)

• A study of dual winding method for compound magnetomotive force motor

  Hijikata, H., Shigeta, T., Kariya, N., Akatsu, K. & Kato, T., 2013 Nov 11, In: IEEJ Transactions on Industry Applications. 133, 10, p. 986-994 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnets
  • Poles
  3 Citations (Scopus)

• A study on improvement in permanent magnet synchronous motor with high permeability magnet

  Miyamasu, M., Nakamura, Y., Akatsu, K. & Masuzawa, M., 2013 Oct 7, In: IEEJ Transactions on Industry Applications. 133, 9, p. 943-951 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnets
  • Synchronous motors
  • Permanent magnets
  • Eddy currents
  • Fluxes
  4 Citations (Scopus)

• Basic properties of an axial-type switched reluctance motor

  Arihara, H. & Akatsu, K., 2013 Jan 28, In: IEEE Transactions on Industry Applications. 49, 1, p. 59-65 7 p., 6361291.

  Research output: Contribution to journal › Article › peer-review

  • Torque
  • Air
  • Inductance
  • Finite element method
  • Experiments
  31 Citations (Scopus)

• Characteristics of a Switched Reluctance Motor using Grain-Oriented electric steel sheet

  Sugawara, Y. & Akatsu, K., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1105-1110 6 p. 6579246. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel sheet
  • Steel
  • Silicon steel
  11 Citations (Scopus)

• Coupled analysis technique involving magnetic-field-control/circuit simulation and loss estimation for permanent magnet synchronous machine

  Narita, K., Yamada, T., Sakashita, Y. & Akatsu, K., 2013 May 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 183, 3, p. 9-16 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Circuit simulation
  • Permanent magnets
  • Magnetic fields
  • Iron
  • Fluxes

• Current optimization strategy for surface permanent magnet synchronous motor drives based on a rigorous mathematical model

  Nakao, N. & Akatsu, K., 2013 Aug 22, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 1188-1195 8 p. 6556284. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Synchronous motors
  • Permanent magnets
  • Torque
  • Mathematical models
  • Magnets
  4 Citations (Scopus)

• Design methodology for variable-flux, flux-intensifying interior permanent magnet machines for an electric-vehicle-class inverter rating

  Limsuwan, N., Fukushige, T., Akatsu, K. & Lorenz, R. D., 2013 Dec 31, 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013. p. 1547-1554 8 p. 6646889. (2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric vehicles
  • Permanent magnets
  • Fluxes
  • Torque
  • Magnetization
  18 Citations (Scopus)

• Efficiency comparison between brushless DC motor and brushless AC motor considering driving method and mAChine design

  Miyamasu, M. & Akatsu, K., 2013, In: IEEJ Journal of Industry Applications. 2, 1, p. 79-86 8 p.

  Research output: Contribution to journal › Article › peer-review

  • AC motors
  • Brushless DC motors
  • Machine design
  • Synchronous motors
  • Pulse width modulation
  8 Citations (Scopus)

• Efficiency contours and loss minimization over a driving cycle of a variable-flux flux-intensifying interior permanent magnet machine

  Fukushige, T., Limsuwan, N., Kato, T., Akatsu, K. & Lorenz, R. D., 2013 Dec 31, 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013. p. 591-597 7 p. 6646755. (2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Magnets
  • Magnetization
  • Permanent magnets
  • Fluxes
  • Rare earths
  25 Citations (Scopus)

• High efficiency SRM drive using a current source inverter

  Takahashi, T., Nagai, T. & Akatsu, K., 2013, 1st International Future Energy Electronics Conference, IFEEC 2013. IEEE Computer Society, p. 223-228 6 p. 6687507. (1st International Future Energy Electronics Conference, IFEEC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Inductance
  • Hysteresis
  • Torque
  • Networks (circuits)
  4 Citations (Scopus)

• High power transformer and motor drive system design for an electriChelicopter

  Kawakami, N. & Akatsu, K., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1065-1070 6 p. 6579240. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Power transformers
  • Systems analysis
  • Inductive power transmission
  • Networks (circuits)
  1 Citation (Scopus)

• Integrated DC-DC chopper using Energy Harvesting

  Takahashi, T. & Akatsu, K., 2013, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 941-947 7 p. 6579219. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Energy harvesting
  • Inductance
  1 Citation (Scopus)

• Motor control methods with a behavior model based on FEA results

  Usui, M., Nakao, N. & Akatsu, K., 2013 Aug 1, 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013. p. 445-450 6 p. 6527060. (Proceedings of the International Conference on Power Electronics and Drive Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sensorless control
  • Finite element method
  • Torque control
  • Simulators
  • Experiments
  2 Citations (Scopus)

• New trend of motor technology for automobiles - Introduction and overview

  Akatsu, K. & Matsui, N., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 130-135 6 p. 6579085. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Automobiles
  • Rare earths
  • Fluxes
  5 Citations (Scopus)

• Principle and basic characteristic of MATRIX motor with variable parameters achieved through arbitrary winding connections

  Hijikata, H. & Akatsu, K., 2013, In: IEEJ Journal of Industry Applications. 2, 6, p. 283-291 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchronous motors
  • Permanent magnets
  • Power electronics
  • Electronic equipment
  • Torque
  6 Citations (Scopus)

• Recent related technologies for EV/HEV applications in JAPAN

  Akatsu, K., Watanabe, N., Fujitsuna, M., Doki, S. & Fujimoto, H., 2013 Sep 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 141-146 6 p. 6579087. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Hybrid vehicles
  4 Citations (Scopus)

• Secondary resistive losses with high-frequency injection-based self-sensing in IPM machines

  Limsuwan, N., Kato, T., Yu, C. Y., Tamura, J., Reigosa, D. D., Akatsu, K. & Lorenz, R. D., 2013 Aug 5, In: IEEE Transactions on Industry Applications. 49, 4, p. 1499-1507 9 p., 6491469.

  Research output: Contribution to journal › Article › peer-review

  • Permanent magnets
  • Magnets
  • Eddy currents
  • Iron
  • Fluxes
  20 Citations (Scopus)

• Suggested design space in a PMSM parameter plane for variable flux machines

  Gagas, B., Fukushige, T., Limsuwan, N., Yu, C. Y., Akatsu, K. & Lorenz, R. D., 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 549-556 8 p. 6556149. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Permanent magnets
  • Fluxes
  • Magnets
  • Torque
  • Demagnetization
  11 Citations (Scopus)

• Torque ripple suppression of permanent magnet synchronous motors considering total loss reduction

  Nakao, N. & Akatsu, K., 2013 Dec 31, 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013. p. 3880-3887 8 p. 6647215. (2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Synchronous motors
  • Permanent magnets
  • Torque
  • Iron
  • Copper
  6 Citations (Scopus)
• 2015

  An accurate iron loss evaluation method based on finite element analysis for switched reluctance motors

  Narita, K., Asanuma, T., Semba, K., Sano, H., Yamada, T., Aiso, K. & Akatsu, K., 2015 Oct 27, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., p. 4413-4417 5 p. 7310283

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Iron
  • Finite element method
  • Eddy currents
  • Hysteresis loops
  • Hysteresis
  14 Citations (Scopus)

• Analysis and PCB design of class D inverter for wireless power transfer systems operating at 13.56 MHz

  Trung, N. K., Ogata, T., Tanaka, S. & Akatsu, K., 2015, In: IEEJ Journal of Industry Applications. 4, 6, p. 703-713 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Inductive power transmission
  • Networks (circuits)
  • Inductance
  23 Citations (Scopus)

• An examination of impedance matching in receiving side of wireless power transfer system operating at 13.56MHz

  Sato, M., Trung, N. K. & Akatsu, K., 2015 Dec 18, 2015 IEEE 2nd International Future Energy Electronics Conference, IFEEC 2015. Institute of Electrical and Electronics Engineers Inc., 7361563

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Inductive power transmission
  • Networks (circuits)
  • Diodes
  • Acoustic impedance

• A novel single phase SRM simply driven by commercial AC power supply

  Aiso, K. & Akatsu, K., 2015 Oct 27, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., p. 3878-3885 8 p. 7310208

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Rotors (windings)
  • Domestic appliances
  • Fans
  • Diodes
  • Copper
  1 Citation (Scopus)

• Controlled voltage source vector control for switched reluctance motors using PWM method

  Nakao, N. & Akatsu, K., 2015 Oct 1, In: IEEJ Transactions on Industry Applications. 135, 10, p. 999-1008 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Variable speed drives
  • Magnetization
  • Controllability
  • Hysteresis
  • Pulse width modulation
  2 Citations (Scopus)

• Design Methodology for Variable Leakage Flux IPM for Automobile Traction Drives

  Kato, T., Minowa, M., Hijikata, H., Akatsu, K. & Lorenz, R. D., 2015 Sep 1, In: IEEE Transactions on Industry Applications. 51, 5, p. 3811-3821 11 p., 7115116.

  Research output: Contribution to journal › Article › peer-review

  • Automobiles
  • Fluxes
  • Permanent magnets
  • Torque
  • Rotors
  24 Citations (Scopus)

• Direct torque control of permanent magnet synchronous motor using real-time simulator with FEA based motor model

  Tanabe, R. & Akatsu, K., 2015 Oct 27, 2015 17th European Conference on Power Electronics and Applications, EPE-ECCE Europe 2015. Institute of Electrical and Electronics Engineers Inc., 7309273

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Torque control
  • Synchronous motors
  • Permanent magnets
  • Simulators
  • Finite element method
  2 Citations (Scopus)

• Efficiency Contours and Loss Minimization Over a Driving Cycle of a Variable Flux-Intensifying Machine

  Fukushige, T., Limsuwan, N., Kato, T., Akatsu, K. & Lorenz, R. D., 2015 Jul 1, In: IEEE Transactions on Industry Applications. 51, 4, p. 2984-2989 6 p., 07046393.

  Research output: Contribution to journal › Article › peer-review

  • Magnetization
  • Magnets
  • Fluxes
  • Permanent magnets
  • Demagnetization
  56 Citations (Scopus)

• Electric drive technologies contributing to low-fuel-comsumption vehicles

  Mizutani, R., Tachibana, T., Morimoto, M., Akatsu, K. & Hoshi, N., 2015 Sep 1, In: IEEJ Transactions on Industry Applications. 135, 9, p. 884-891 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Electric drives
  • Fuel economy
  • Internal combustion engines
  12 Citations (Scopus)

• High efficiency SRM drive using a Quasi-Current Source Inverter

  Suzuki, Y. & Akatsu, K., 2015 Dec 18, 2015 IEEE 2nd International Future Energy Electronics Conference, IFEEC 2015. Institute of Electrical and Electronics Engineers Inc., 7361450

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Hysteresis
  • Torque
  • Sampling
  • Experiments
  2 Citations (Scopus)

• High voltage driving method by using cluster inverters for SRM

  Miyane, K. & Akatsu, K., 2015 Jul 27, 9th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2015-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 1617-1622 6 p. 7167993

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Networks (circuits)
  • Bridge circuits

• Measurement and electromagnetic field analysis of IEEJ benchmark IPM motors - Comparison of distributed winding and concentrated winding IPMSMs

  Kaimori, H. & Akatsu, K., 2015, In: Journal of the Institute of Electrical Engineers of Japan. 135, 2, p. 75-82 8 p.

  Research output: Contribution to journal › Article › peer-review

• PCB design for 13.56MHz half-bridge class D inverter for wireless power transfer system

  Trung, N. K., Ogata, T., Tanaka, S. & Akatsu, K., 2015 Jul 27, 9th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2015-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 1692-1699 8 p. 7168005

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Inductive power transmission
  • Networks (circuits)
  • Inductance
  7 Citations (Scopus)

• Proposal and machine characteristics of a single-phase srm driven by commercial AC power supply

  Aiso, K. & Akatsu, K., 2015 Nov 1, In: IEEJ Transactions on Industry Applications. 135, 11, p. 1091-1099 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Switching circuits
  • Induction motors
  • Sensors
  • Experiments

• Ringing suppressing method in 13.56MHz resonant inverter for wireless power transfer systems

  Trung, N. K. & Akatsu, K., 2015 Oct 27, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., p. 2275-2281 7 p. 7309980. (2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Inductive power transmission
  • Networks (circuits)
  • Damping
  • Topology
  7 Citations (Scopus)

• Variable characteristics DC motor by changing brush lead angle to expand the operation range

  Takura, D. & Akatsu, K., 2015 Jul 27, 9th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2015-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 695-700 6 p. 7167859

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Brushes
  • Lead
  • Synchronous motors
  • Permanent magnets
  • Experiments
  1 Citation (Scopus)

• Variable magnetization machine in electrified vehicle application

  Fukushige, T., Kato, T., Akatsu, K. & Lorenz, R. D., 2015 Sep 1, In: IEEJ Transactions on Industry Applications. 135, 9, p. 922-928 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnetization
  • Rotors
  • Magnetic circuits
  • Magnets
  • Electric vehicles
  3 Citations (Scopus)

• Vibration reduction method in SRM with a smoothing voltage commutation by PWM

  Tanabe, A. & Akatsu, K., 2015 Jul 27, 9th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2015-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 600-604 5 p. 7167845

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric commutation
  • Pulse width modulation
  • Acoustic noise
  • Natural frequencies
  • Industry
  14 Citations (Scopus)

• Wide range operation by low-voltage inverter-fed MATRIX motor with single-layer distributed winding for automobile traction motor

  Hijikata, H., Sakai, Y., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2015 Oct 27, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., p. 6545-6551 7 p. 7310576

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Traction motors
  • Automobiles
  • Electric current control
  • Finite element method
  2 Citations (Scopus)
• 2017

  A built-in high temperature half-bridge power module with low stray inductance and low thermal resistance for in-wheel motor application

  Suzuki, T., Yamashita, M., Mori, T., Araki, S., Tanimoto, S., Iizuka, S., Niitsuma, Y. & Akatsu, K., 2017, Silicon Carbide and Related Materials 2016. Zekentes, K., Zekentes, K., Vasilevskiy, K. V. & Frangis, N. (eds.). Trans Tech Publications Ltd, p. 677-680 4 p. (Materials Science Forum; vol. 897 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • wheels
  • thermal resistance
  • inductance
  • Heat resistance
  • Inductance
  3 Citations (Scopus)

• Advanced torque control of permanent magnet synchronous motor using finite element analysis based motor model with a real-time simulator

  Tanabe, R. & Akatsu, K., 2017, In: IEEJ Journal of Industry Applications. 6, 3, p. 173-180 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Torque control
  • Synchronous motors
  • Permanent magnets
  • Simulators
  • Finite element method
  7 Citations (Scopus)

• An examination of optimizing input impedance for wireless power transfer operating with high power condition

  Uchida, K. & Akatsu, K., 2017 Jul 25, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017. Institute of Electrical and Electronics Engineers Inc., p. 633-637 5 p. 7992112

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • High Power
  • Inductive power transmission
  • Impedance
  • Acoustic impedance
  • Output
  2 Citations (Scopus)

• A novel magnetic gear for high speed motor system

  Aiso, K., Akatsu, K. & Aoyama, Y., 2017 Aug 3, 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017. Institute of Electrical and Electronics Engineers Inc., 8002311

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Rotors
  • Magnets
  • Permanent magnets
  • Fluxes
  • Torque
  4 Citations (Scopus)

• A novel reluctance magnetic gear for high speed motor

  Aiso, K. & Akatsu, K., 2017 Feb 13, ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7854742

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • High Speed
  • Rotor
  • Magnets
  • Rotors
  • Eddy Currents
  13 Citations (Scopus)

• A practical approach for electromagnetic analysis with the effect of the residual strain due to manufacturing processes

  Sano, H., Narita, K., Zeze, E., Yamada, T., Kazuki, U. & Akatsu, K., 2017 Feb 13, ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7854757

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Manufacturing
  • Steel sheet
  • Degradation
  • Function Approximation
  9 Citations (Scopus)

• A research trend of electric machines with development of finite element analysis

  Hijikata, H. & Akatsu, K., 2017 Jun 1, In: IEEJ Transactions on Electrical and Electronic Engineering. 12, p. S171-S176

  Research output: Contribution to journal › Article › peer-review

  • Electric machinery
  • Finite element method
  • Torque
  • Magnetic fields

• A thermal dissipation characteristics of integrated in-wheel motor using SiC power module

  Iizuka, S. & Akatsu, K., 2017 Jul 25, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017. Institute of Electrical and Electronics Engineers Inc., p. 1251-1255 5 p. 7992222. (2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wheel
  • Dissipation
  • Inverter
  • Wheels
  • Cooling
  1 Citation (Scopus)

• Complex vector form PI control for harmonic current control of a PMSM

  Okajima, Y. & Akatsu, K., 2017, In: IEEJ Transactions on Industry Applications. 137, 3, p. 238-245 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Electric current control
  • Transient analysis
  • Controllers
  • Permanent magnets
  • Poles
  2 Citations (Scopus)

• Controlled Voltage Source Vector Control for Switched Reluctance Motors Using PWM Method

  Nakao, N. & Akatsu, K., 2017 Jan 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 198, 2, p. 27-38 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Variable speed drives
  • Magnetization
  • Controllability
  • Hysteresis
  • Pulse width modulation
  2 Citations (Scopus)