Find Research outputs — Shibaura Institute of Technology

2013

A simple microfluidic gradient generator with a soft-lithographically prototyped, high-aspect-ratio, ∼2 μm wide microchannel

Ogawa, T., Matsunaga, N., Inomata, S., Tanaka, M. & Futai, N., 2013 Oct 31, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013. p. 5521-5524 4 p. 6610800. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2011

Phase-mode LAPS and its application to chemical imaging

Miyamoto, K. I., Wagner, T., Yoshinobu, T., Kanoh, SI. & Schöning, M. J., 2011 May 20, In: Sensors and Actuators, B: Chemical. 154, 1, p. 28-32 5 p.

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

2019

Study of High-speed SRM with Amorphous steel sheet for EV

Tomioka, T. & Akatsu, K., 2019 Aug, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922014. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2018

Characterization of Electrospun Bi₂Sr₂CaCu₂O_8+δ Nanowires with Reduced Preparation Temperature

Zeng, X. L., Koblischka, M. R., Laurent, F., Karwoth, T., Koblischka-Veneva, A. D., Hartmann, U., Chang, C., Kumar, P. & Eibl, O., 2018 Jun 1, In: IEEE Transactions on Applied Superconductivity. 28, 4, 7200505.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

2011

Development of an upper limb patient simulator for physical therapy exercise

Takhashi, Y., Komeda, T., Koyama, H., Yamamoto, S. I., Arimatsu, T., Kawakami, Y., Inoue, K. & Ito, Y., 2011 Nov 2, 2011 IEEE International Conference on Rehabilitation Robotics, ICORR 2011 - Rehab Week Zurich 2011. 5975510. (IEEE International Conference on Rehabilitation Robotics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

16 Citations (Scopus)

2016

A Study of a Driver Model Using Unconscious Driving Behaviors

Ito, T. & Yamazaki, K., 2016, In: Procedia Computer Science. 96, p. 754-761 8 p.

Research output: Contribution to journal › Article › peer-review

2011

An access-point selection algorithm for user QoS and system optimization based on user cooperative moving

Miyata, S., Murase, T. & Yamaoka, K., 2011 Dec 1, 2011 International Conference on the Network of the Future, NOF 2011 - Proceedings. p. 76-80 5 p. 6126687. (2011 International Conference on the Network of the Future, NOF 2011 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2018

Development of Engineering Education Program for Students before Starting Graduation Researches on Forefront Technologies

Oka, T., Suzuki, T., Abe, K., Yamauchi, T., Yamagiwa, K., Sato, T., Tanabe, Y. & Narumi, T., 2018 Sep 17, Proceedings - 2017 7th World Engineering Education Forum, WEEF 2017- In Conjunction with: 7th Regional Conference on Engineering Education and Research in Higher Education 2017, RCEE and RHEd 2017, 1st International STEAM Education Conference, STEAMEC 2017 and 4th Innovative Practices in Higher Education Expo 2017, I-PHEX 2017. Institute of Electrical and Electronics Engineers Inc., p. 136-139 4 p. 8467132

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2011

Prototype of SC inverter

Osamura, K., Sakai, A., Nakamura, T., Oka, T., Fukuda, S. & Yamaguchi, S., 2011 Jun 1, In: IEEE Transactions on Applied Superconductivity. 21, 3 PART 2, p. 1445-1448 4 p., 5675739.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Hydrogen permselective silica hybrid membranes prepared by a novel CVD method

Nomura, M., Monma, K., Matsuyama, E., Kimura, S., Miyake, R. & Utsumi, K., 2011 Jun 1, In: Transactions of the Materials Research Society of Japan. 36, p. 209-212

Research output: Contribution to journal › Article › peer-review

2015

State consensus for hierarchical multi-agent dynamical systems with inter-layer communication time delay

Duan, Z., Zhai, G. & Xiang, Z., 2015 Mar 1, In: Journal of the Franklin Institute. 352, 3, p. 1235-1249 15 p.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

2011

Measurement of wakuwaku feeling of interactive systems using biological signals

Ohkura, M., Hamano, M., Watanabe, H. & Aoto, T., 2011 Dec 1, Emotional Engineering: Service Development. Springer London, p. 327-343 17 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

6 Citations (Scopus)

2016

Gait Generation for a Small Biped Robot using Approximated Optimization Method

Nguyen, T., Tao, L. & Hasegawa, H., 2016 Nov 14, In: IOP Conference Series: Materials Science and Engineering. 157, 1, 012009.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

2017

Degree sum conditions for path-factors with specified end vertices in bipartite graphs

Matsubara, R., Matsumura, H., Tsugaki, M. & Yamashita, T., 2017 Feb 6, In: Discrete Mathematics. 340, 2, p. 87-95 9 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2016

Does Sympathy to Colleague Overcome Shame of Defect?

Nagayoshi, S. & Nakamura, J., 2016, In: Unknown Journal. 96, p. 1720-1729 10 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2017

The study of kawaii feeling by using eye tracking

Laohakangvalvit, T., Iida, I., Charoenpit, S. & Ohkura, M., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, Vol. 483. p. 185-197 13 p. (Advances in Intelligent Systems and Computing; vol. 483).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2011

Graph-based Semi-Supervised Kernel Regression via Gaussian Process

Guo, X., Uehara, K. & Yasumura, Y., 2011 Mar 29, In: Default journal.

Research output: Contribution to journal › Article › peer-review

Urban Redevelopment and College Campuses

Maeda, H., 2011 Nov 15, The New Dimensions of Campus Planning. Architectural Institute of Japan

Research output: Chapter in Book/Report/Conference proceeding › Chapter

2017

Operation of power-based BOCDR: Measurement sensitivity influenced by spatial resolution

Lee, H., Mizuno, Y. & Nakamura, K., 2017, Conference on Lasers and Electro-Optics/Pacific Rim, CLEOPR 2017. OSA - The Optical Society, s1720. (Optics InfoBase Conference Papers; vol. Part F122-CLEOPR 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2020

Pulse-by-pulse optical observation of growth of laser-induced periodic surface structure at oblique incidence

Shibata, K. & Matsuo, S., 2020 Sep 1, In: Journal of Laser Micro Nanoengineering. 15, 2, p. 128-131 4 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Evaluation of the efficacy of a phage cocktail against gentamicin-resistant Klebsiella pneumoniae

Paran, A. K., Mamora, D., Fong, G. K. Y., Lihan, S., Zulkarnain, A. & Tan, C. S., 2020 Apr 1, In: Journal of Sustainability Science and Management. 15, 3, p. 86-100 15 p.

Research output: Contribution to journal › Article › peer-review

2015

Plasma-cavitation pencil cutter for powerful micro-processing

Arakawa, Y., Ohmura, M., Tsujimoto, D. & Yamanishi, Y., 2015 Aug 5, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015. Institute of Electrical and Electronics Engineers Inc., p. 521-524 4 p. 7180975

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2016

A scalable 3D heterogeneous multi-core processor with inductive-coupling thruchip interface

Miura, N., Koizumi, Y., Sasaki, E., Take, Y., Matsutani, H., Kuroda, T., Amano, H., Sakamoto, R., Namiki, M., Usami, K., Kondo, M. & Nakamura, H., 2016 May 24, 2013 IEEE Hot Chips 25 Symposium, HCS 2013. Institute of Electrical and Electronics Engineers Inc., 7478328. (2013 IEEE Hot Chips 25 Symposium, HCS 2013).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2017

Micro-needle with polygonal structure of micro-channel for stress and blood or drug flow optimization

Ibrahim, M. D., Yunos, Y. S., Watanabe, N., Mohtadzar, N. A. A., Semait, S. N. H., Rigit, A. R. H., Sunami, Y., Wong, L. K., Rahman, M. R. A. & Mohtar, M. Z., 2017 Jul 31, In: Engineering Journal. 21, 4, p. 207-216 10 p.

Research output: Contribution to journal › Article › peer-review

2011

Scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Wang, P., Behan, G., Kirkl, A. I., Nellist, P. D., Cosgriff, E. C., D'Alfonso, A. J., Morgan, A. J., Allen, L. J., Hashimoto, A., Takeguchi, M., Mitsuishi, K. & Shimojo, M., 2011 Sep 1, In: Default journal.

Research output: Contribution to journal › Article › peer-review

14 Citations (Scopus)

2018

A method of verification from the third party view for iot prototype system and its implementational evaluation

Dosaka, S., Ohe, N., Nakajima, K., Yonemori, H., Inoue, M., Kambe, H. & Koizumi, H., 2018 Jan 1, In: IEEJ Transactions on Electronics, Information and Systems. 138, 6, p. 743-754 12 p.

Research output: Contribution to journal › Article › peer-review

2012

Improved ferrite magnet vernier machine for an in-wheel machine

Sato, K., Hosoya, R. & Shimomura, S., 2012 Dec 1, PECon 2012 - 2012 IEEE International Conference on Power and Energy. p. 414-419 6 p. 6450248. (PECon 2012 - 2012 IEEE International Conference on Power and Energy).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

11 Citations (Scopus)

2017

Functionally graded aluminum foam consisting of dissimilar aluminum alloys fabricated by sintering and dissolution process

Hangai, Y., Morita, T. & Utsunomiya, T., 2017 Jun 1, In: Materials Science and Engineering A. 696, p. 544-551 8 p.

Research output: Contribution to journal › Article › peer-review

21 Citations (Scopus)

2020

The composition and poling-dependent photovoltaic studies in ferroelectric (Bi_1−xSr_x)(Fe_1−xTi_x)O₃ thin films

Biswas, P. P., Thirmal, C., Pal, S., Miryala, M., Murakami, M. & Murugavel, P., 2020 Jan 1, In: Journal of Materials Science: Materials in Electronics. 31, 2, p. 1515-1523 9 p.

Research output: Contribution to journal › Article › peer-review

2015

Simulation of acoustical noise reduction for magnetic resonance imaging by an active control headphone with piezoelectric plate and earmuff

Osada, R., Muto, K., Yagi, K. & Chen, G., 2015, INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering. The Institute of Noise Control Engineering of the USA, Inc.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2011

Bifurcation in mutually coupled three neurons with inhibitory synapses

Ioka, E., Matusya, Y. & Kitajima, H., 2011 Nov 7, 2011 20th European Conference on Circuit Theory and Design, ECCTD 2011. p. 612-615 4 p. 6043617. (2011 20th European Conference on Circuit Theory and Design, ECCTD 2011).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2019

A synthetic replica having surface morphology of decellularized tissue regulated orientation and shape of cells

Kimura, T., Kobayashi, M., Hashimoto, Y., Fujisato, T., Nakamura, N. & Kisliida, A., 2019 Jan 1, Society for Biomaterials Annual Meeting and Exposition 2019: The Pinnacle of Biomaterials Innovation and Excellence - Transactions of the 42nd Annual Meeting. Society for Biomaterials, 1 p. (Transactions of the Annual Meeting of the Society for Biomaterials and the Annual International Biomaterials Symposium; vol. 40).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Semi-autonomous Collision Avoidance Flight Using Two Dimensional Laser Range Finder with Mirrors for Bridge Inspection

Abiko, S., Harada, T., Hasegawa, T., Yuta, S. & Shimaji, N., 2019 Mar 11, 2018 IEEE International Conference on Robotics and Biomimetics, ROBIO 2018. Institute of Electrical and Electronics Engineers Inc., p. 2267-2272 6 p. 8664780. (2018 IEEE International Conference on Robotics and Biomimetics, ROBIO 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2017

Molecular-cloud-scale Chemical Composition. II. Mapping Spectral Line Survey toward W3(OH) in the 3 mm Band

Nishimura, Y., Watanabe, Y., Harada, N., Shimonishi, T., Sakai, N., Aikawa, Y., Kawamura, A. & Yamamoto, S., 2017 Oct 10, In: Astrophysical Journal. 848, 1, 17.

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

2012

Anti-resonance peak damping of PDN impedance by on-board snubber circuits

Iijima, Y., Matsumura, M. & Sudo, T., 2012 Dec 1, 2012 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2012. p. 127-130 4 p. 6469429. (2012 IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2012).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

2011

Advanced adaptive control for piezo-actuated nano-positioner

Chen, X., Su, C. Y. & Fukuda, T., 2011, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 3346-3351 6 p. 6119849. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2014

Optimal threshold configuration with equality based call admission control with cooperative users (mixed loss and delay system)

Miyata, S., Yamaoka, K. & Kinoshita, H., 2014 Jan 1, p. 105-111. 7 p.

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

2016

SPECTRAL LINE SURVEY TOWARD MOLECULAR CLOUDS in the LARGE MAGELLANIC CLOUD

Nishimura, Y., Shimonishi, T., Watanabe, Y., Sakai, N., Aikawa, Y., Kawamura, A. & Yamamoto, S., 2016 Feb 20, In: Astrophysical Journal. 818, 2, 161.

Research output: Contribution to journal › Article › peer-review

18 Citations (Scopus)

2018

A Study of automated image capturing HDI environment using NAVIO 2

Manawadu, U. A., Karunarathna, M. W. Y. C., Gunawardana, H. D. C. N., Premachandra, C., De Silva, P. R. S. & Wijesinghe, W. A. S., 2018 Dec 12, 2018 IEEE 7th Global Conference on Consumer Electronics, GCCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 499-500 2 p. 8574657

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2019

A Geometric Edge Detection Method from Cross-sectional Shapes of Cloth-like Object

Yamamoto, I., Yoshimi, T. & Hirayama, M., 2019 Oct, ICCAS 2019 - 2019 19th International Conference on Control, Automation and Systems, Proceedings. IEEE Computer Society, p. 292-295 4 p. 8971697. (International Conference on Control, Automation and Systems; vol. 2019-October).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2011

Preparation and properties of sol-gel thin film containing quinacridone latent pigment by using laser irradiation

Ohishi, T. & Ishitsuka, H., 2011 Jan 1, In: IOP Conference Series: Materials Science and Engineering. 18, SYMPOSIUM 2A, 032010.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Citations (Scopus)

2018

Development of an active upper limb orthosis controlled by EMG with upper arm rotation

Hanafusa, A., Shiki, F., Ishii, H., Nagura, M., Kubota, Y., Ohnishi, K. & Shibata, Y., 2018, Intelligent Human Systems Integration - Proceedings of the 1st International Conference on Intelligent Human Systems Integration IHSI 2018: Integrating People and Intelligent Systems. Karwowski, W. & Ahram, T. (eds.). Springer Verlag, p. 163-169 7 p. (Advances in Intelligent Systems and Computing; vol. 722).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2012

Systems Design Analysis of Stranded Commuters Behaviors

Horiuchi, Y., 2012 Apr 12, In: EMCSR Proceedings (To be published soon.).

Research output: Contribution to journal › Article › peer-review

2019

Kawaii Spoons for Senior Citizens

Ohkura, M., Tivatansakul, S. & Akimoto, K., 2019, Springer Series on Cultural Computing. Springer, p. 147-151 5 p. (Springer Series on Cultural Computing).

Research output: Chapter in Book/Report/Conference proceeding › Chapter

2012

Effect of inclined support surface on postural strategy during anterior-posterior platform translations

Ishizawa, M. & Yamamoto, S. I., 2012 Dec 14, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2012. p. 4772-4775 4 p. 6347034. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2014

A path-planning algorithm for humanoid climbing robot using Kinect sensor

Dung, N. A. & Shimada, A., 2014 Oct 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1549-1554 6 p. 6935284. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5 Citations (Scopus)

2020

Development of a surgical instrument with a single strain area for measuring biaxial cutting forces

Suzuki, M., Abiko, S., Tsujita, T. & Abe, K., 2020 Jul, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. Institute of Electrical and Electronics Engineers Inc., p. 1613-1618 6 p. 9158871. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2011

Development of precise micro press forming system for fabrication of micro parts

Yang, M., Aizawa, T., Nakano, S. & Ito, K., 2011 Dec 1, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1093-1096 4 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2020

Seamless 90-degree attitude transition flight of a quad tilt-rotor UAV under full position control

Magariyama, T. & Abiko, S., 2020 Jul, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. Institute of Electrical and Electronics Engineers Inc., p. 839-844 6 p. 9158965. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2018

The Co-evolution of Disks and Stars in Embedded Stages: The Case of the Very-low-mass Protostar IRAS 15398-3359

Okoda, Y., Oya, Y., Sakai, N., Watanabe, Y., Jrgensen, J. K., Van Dishoeck, E. F. & Yamamoto, S., 2018 Sep 10, In: Astrophysical Journal Letters. 864, 2, L25.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Filters for Research output

Search results