Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Shinji Hashimura
2016

Easy set-up and in situ automatic gear diagnostic system using only laser reflection

Tanaka, E., Nakajima, K., Okabe, K., Takebe, H., Nagamura, K., Ikejo, K., Hashimura, S., Muramatsu, K., Watanuki, K. & Nemoto, R., 2016, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 10, 4

Research output: Contribution to journalArticle

2019

Effects of Clamp Force on Fatigue Strength of Aluminum Alloy Bolts

Hashimura, S., Kamibeppu, K., Nutahara, T., Fukuda, K. & Miyashita, Y., 2019, In : Procedia Structural Integrity. 19, p. 204-213 10 p.

Research output: Contribution to journalConference article

Open Access

Robustness of polyisobutylene for friction coefficients between bearing surfaces of bolted joints

Hashimura, S., Miki, T., Otsu, T., Komatsu, K., Inoue, S., Yamashita, S. & Omiya, Y., 2019 Jan 1, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2018

An influence of tightening torque stored in tightening process on fatigue strength of aluminum bolts

Hashimura, S., Nutahara, T. & Kamibeppu, K., 2018 Jan 1, Advances in Fracture and Damage Mechanics XVII. Rodriguez-Tembleque, L., Dominguez, J. & Aliabadi, F. M. H. (eds.). Trans Tech Publications Ltd, p. 229-234 6 p. (Key Engineering Materials; vol. 774 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

Fatigue characteristics of nonferrous bolts at elevated temperature

Hashimura, S., Torii, T. & Otsu, T., 2015 Jan 1, In : Key Engineering Materials. 627, p. 265-268 4 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
2012

Tightening characteristics of nonferrous bolts and usefulness of magnesium alloy bolts

Hashimura, S., Miyashita, Y., Kurakake, Y., Yamanaka, S. & Hibi, G., 2012, In : SAE Technical Papers.

Research output: Contribution to journalConference article

1 Citation (Scopus)
2020

Discussion on shear properties and flow model in screw tightening lubricant PIB under low sliding speed conditions

Otsu, T., Komatsu, K. & Hashimura, S., 2020 Nov, In : Tribology International. 151, 106474.

Research output: Contribution to journalArticle

2016
5 Citations (Scopus)
2019

Development of detection method for clamped part stiffness in bolted joint

Hashimura, S., Komatsu, K., Shinohara, N., Nishioka, I. & Otsu, T., 2019 Apr 2, In : SAE Technical Papers. 2019-April, April

Research output: Contribution to journalConference article

2018
3 Citations (Scopus)
2016

Study on tribological properties of polyisobutylene lubricant for use in screw tightening

Otsu, T., Komatsu, K. & Hashimura, S., 2016, In : Toraibarojisuto/Journal of Japanese Society of Tribologists. 61, 12, p. 866-873 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2015

Development of the easy set-up and in situ automatic gear diagnostic system using a laser beam

Nakajima, K., Tanaka, E., Okabe, K., Takebe, H., Nagamura, K., Ikejo, K., Hashimura, S., Muramatsu, K., Watanuki, K. & Nemoto, R., 2015, ASME 2015 Power Transmission and Gearing Conference; 23rd Reliability, Stress Analysis, and Failure Prevention Conference. American Society of Mechanical Engineers (ASME), Vol. 10.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2013

Bolt load loss behavior of magnesium alloy AZ91D bolted joints clamped with aluminum alloy A5056 bolt

Sujatanond, S., Miyashita, Y., Hashimura, S., Mutoh, Y. & Otsuka, Y., 2013 May 2, Machinery Electronics and Control Engineering II. p. 135-139 5 p. (Applied Mechanics and Materials; vol. 313-314).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011

Fatigue characteristics of bolted joint under transverse vibration: Influence of bolt tightening conditions on transverse fatigue strength

Hashimura, S., Kurakake, Y. & Umeno, S., 2011 Jan 5, Advances in Fracture and Damage Mechanics IX, FDM 2010. p. 609-612 4 p. (Key Engineering Materials; vol. 452-453).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Fatigue characteristics of nonferrous bolts

Hashimura, S., Torn, T., Miyashita, Y., Yamanaka, S. & Hibi, G., 2014 Jan 1, Advances in Fracture and Damage Mechanics XII. p. 417-420 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2015

Design of electrostatic adhesion device using the flexible electrodes

Takada, A., Nakamura, S., Yamanishi, Y., Hashimura, S., Nagasawa, S., Kogure, T. & Maeda, S., 2015 Jan 9, 2014 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2014. Institute of Electrical and Electronics Engineers Inc., 7006081

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Easy set-up and in situ automatic gear diagnostic system using only laser reflection

Tanaka, E., Nakajima, K., Okabe, K., Takebe, H., Nagamura, K., Ikejo, K., Hashimura, S., Muramatsu, K., Watanuki, K. & Nemoto, R., 2016, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 10, 4, 00531.

Research output: Contribution to journalArticle

Open Access
2019

Effect of surface roughness on film formation properties of screw tightening lubricant PIB

Otsu, T., Komatsu, K. & Hashimura, S., 2019 Aug 1, In : Tribology International. 136, p. 1-12 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2020
Open Access

Autonomous oil flow generated by self-oscillating polymer gels

Yoshimura, K., Otsuka, Y., Mao, Z., Cacucciolo, V., Okutaki, T., Yamagishi, H., Hashimura, S., Hosoya, N., Sato, T., Yamanishi, Y. & Maeda, S., 2020 Dec 1, In : Scientific Reports. 10, 1, 12834.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
2018

Evaluation of the Clamping Force of Bolted Joints Using Local Mode Characteristics of a Bolt Head

Hosoya, N., Hosokawa, T., Kajiwara, I., Hashimura, S. & Huda, F., 2018 Dec 1, In : Journal of Nondestructive Evaluation. 37, 4, 75.

Research output: Contribution to journalArticle

2 Citations (Scopus)