Find Research outputs

Search results

• 1999

  Development of Ultra High Speed Milling Machine using Reciprocating Layer Cutter Path

  Takahashi, I., Anzai, M. & Nakagawa, T., 1999, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 5, p. 714-718 5 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• An example of a positive definite function which is not of positive type on

  N.Sakakibara, N. S., Furuta, K. & Sakakibara, N., 1999 May 1, In: Mathematical Journal of Ibaraki University. 31, p. 43-46

  Research output: Contribution to journal › Article › peer-review
• 2007

  Wideband and High-Isolation Properties by the Combination of Thin-Film Embedded Capacitor and Planer EBG Structure

  Sudo, T., Ichijo, S. & Kushihira, T., 2007 May 31, In: IEEE 57th Electronic Components and Technology Conference. p. 1212-1217

  Research output: Contribution to journal › Article › peer-review
• 1994

  Dirichlet series that appear in the additire number theory of matrices (和文)

  Shigeki, E. & Egami, S., 1994 Jan 1, In: Default journal. 886, p. 178-186

  Research output: Contribution to journal › Article › peer-review
• 2007

  Disaster-Response In formation Sharing System based on Cellular Phone with GPS

  Aoki, M., Yonemura, S. & Shimokura, K., 2007 Jul 1, In: Proc. of HCI international 2007. p. 250-255

  Research output: Contribution to journal › Article › peer-review
• 2004

  The effects of background knowledge on L2 reading comprehension: Special focus on background knowledge test methods

  Ushiro, Y., Koizumi, R., In’nami, Y., Shimizu, M., Hijikata, Y., Kikuchi, K., Nakagawa, C., Naya, M., Ohkubo, A. & Innami, Y., 2004 Mar 20, In: JACET Bulletin. 38, p. 63-77

  Research output: Contribution to journal › Article › peer-review
• 2006

  Takeoff and Landing Control using Force Sensor by Electrically-Powered Helicopters

  Fujita, M. & Shimada, A., 2006 Mar 26, In: The 9th IEEE International Workshop on Advanced Motion Control - AMC'06. p. 62-65

  Research output: Contribution to journal › Article › peer-review

  8 Citations (Scopus)
• 2005

  Adaptive notification system guaranteeing message reachability

  Kasai, H., Yamazaki, K. & Kurakake, S., 2005, Proceedings - International Conference on Pervasive Services, ICPS '05. p. 208-217 10 p. 1506412. (Proceedings - International Conference on Pervasive Services, ICPS '05; vol. 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)
• 1998

  Low temperature wafer direct bonding between GaZnAsP etch stop layer and Gd3GasO12.

  Yokoi, H. & Mizumoto, T., 1998 Sep 17, In: European Physical Society. p. 336

  Research output: Contribution to journal › Article › peer-review
• 2015

  Estimation of velocity vector by target tracking

  Anjo, T. & Tanaka, N., 2015, In: Acoustical Science and Technology. 36, 2, p. 161-163 3 p.

  Research output: Contribution to journal › Article › peer-review
• 1992

  AVITAL,a Privata Teaching System by FAX Communication

  Iizawa, I., A., A., Sugiki, S., N., N., Shirota, S., Y., Y., Kunii, K. & H.S., H. S., 1992 Jun 1, In: proceedingd. p. 293-301

  Research output: Contribution to journal › Article › peer-review

  1 Citation (Scopus)
• 2013

  Rapid Solidification of Levitated and Undercooled Ge Alloy Melt

  Yuusuke, I., Nagayama, K. & Kuribayashi, K., 2013 Feb 1, In: J.Crystal growth.

  Research output: Contribution to journal › Article › peer-review
• 1999

  Fatigue strength improvement methods by treating the weld toe

  Miki, C., Anami, K., Tani, H. & Sugimoto, I., 1999 Feb, In: Unknown Journal. 17, 1, p. 111-119 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)
• 2006

  Fundamental study on bone formation using collagen orientation induced by magnetic fields

  Shinohara, H., Takei, H., Saito, D., Kotani, M., Ueno, S. & Nakahira, A., 2006 Jan, In: Journal of the Ceramic Society of Japan. 114, 1325, p. 131-134 4 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 1989

  Optical distortion of transmissive optics at high power CO₂laser irradiation

  Takahashi, H., Kimura, M. & Sano, R., 1989 May, In: Applied Optics. 28, 9, p. 1727-1730 4 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Electrical properties of a multilayer thin film substrate for multichip packages

  Shimada, O., Ito, K., Miyagi, T., Kimijima, S. & Sudo, T., 1989, p. 121-127. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)
• 1998

  Virtual Surgery System Using Deformable Organ Models and Force Feedback System with Three Fingers

  Suzuki, N., Hattori, A., Takatsu, A., Kumano, T., Ikemoto, A., Adachi, Y. & Uchiyama, A., 1998 Oct 11, In: Lecture Notes in Computer Science. 1496, p. 398-403

  Research output: Contribution to journal › Article › peer-review

  11 Citations (Scopus)
• 2002

  Use of fiber reinforced polymer composite as reinforcing material for concrete

  Uomoto, T., Mutsuyoshi, H., Katsuki, F. & Misra, S., 2002 Jun 1, In: Journal of material in civil engineering. 14, p. 191-209

  Research output: Contribution to journal › Article › peer-review

  90 Citations (Scopus)
• 2016

  Delay insertion based P2PTV traffic localization considering peer's relaying capability

  Wechtaisong, C. & Morino, H., 2016 Oct 3, Proceedings - Asia-Pacific Conference on Communications, APCC 2016. Institute of Electrical and Electronics Engineers Inc., p. 573-578 6 p. 7581499

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 1992

  Development of a New Type of Resin Mortar Using High Molecular Weight Methacrylate for Repair of Concrete Floors

  Motohashi, K., Nomaguchi, K., Iwai, E. & Tanaka, K., 1992 Jan 1, In: International CIB W70 Symposium on Innovations in Management, Maintenance and Modernization of Buildings (Rotterdam). 6, p. Part 7.3.4

  Research output: Contribution to journal › Article › peer-review
• 1990

  A Diary Study of Language Teaching Experiences as a Tool for Self-development

  Kawaguchi, K., 1990 Aug 1, In: Columbia University, Teachers College.

  Research output: Contribution to journal › Article › peer-review
• 2010

  Ground motion characteristics of 2007 Niigata-ken Chuetsu-oki earthquake

  Hijikata, K., Nishimura, I., Mizutani, H., Tokumitsu, R., Mashimo, M. & Tanaka, S., 2010 Jul, In: Journal of Structural and Construction Engineering. 75, 653, p. 1279-1288 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)
• 2012

  The digital camera as a GPS compass: Location matching using point clouds

  Nakagawa, M., Kato, D., Endo, H., Itaya, H., Ochiai, K. & Nakanishi, A., 2012, International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives. International Society for Photogrammetry and Remote Sensing, Vol. 39. p. 391-396 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2003

  Surface Micromachining in Optical Isolator with Semiconductor Guiding Layer for Enhancement of Magnetooptic Effect

  Yokoi, H., Mizumoto, T., Sakai, T., Ohtsuka, T. & Nakano, Y., 2003 Aug, In: Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. 42, 8, p. 5094-5097 4 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2006

  Regulation of MARCKS phosphorylation level and localization in SH-SY5Y cells stimulated with IGF-I

  Shiraishi, M., Tanabe, A. & Sasaki, Y., 2006 Jun 20, In: Default journal. p. 276

  Research output: Contribution to journal › Article › peer-review
• 2008

  A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

  Sawa, T., Nagato, Y., Ikuse, Y. & Unno, K., 2008 Mar, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 74, 3, p. 247-251 5 p.

  Research output: Contribution to journal › Article › peer-review
• 2014

  Development of building continuity support system as building management system for business continuity: Fundamental research on implementation of resilient buildings

  Masuda, Y., 2014 Jun, In: Journal of Environmental Engineering. 79, 700, p. 535-544 10 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2010

  EFFECT OF CURING CONDITIONS AND EXPOSURE CONDITIONS ON DRYING SHRINKAGE OF CONCRETE

  Inokuchi, K. & Iyoda, T., 2010 Nov 29, In: The 4th ACF International conference 2010.

  Research output: Contribution to journal › Article › peer-review
• 1999

  Florida International University, School of Architecture, Design Competition Project

  Isozaki, A., Kikuchi, M., Ohno, K., Imamura, Y., Taketomi, Y. & Maffei, A., 1999 Mar 1, In: "GA" and other architectural magazines.

  Research output: Contribution to journal › Article › peer-review
• 1997

  Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

  Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 Jun 1, In: Default journal. (1997.6), p. 264-269

  Research output: Contribution to journal › Article › peer-review
• 1983

  Insulin Release from Monolayer Culture of Adult Rat Pancreatic Islets Using a Perifusion System

  Ohgawara, H., Hirata, Y., Machiyama, E., Kabei, N., Sakurai, Y. & Ito, S., 1983 Jan 1, In: Journal of the Japan Diabetes Society. 26, 4, p. 469-475 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 1996

  New electrical modeling approach for simultaneous switching noise for high-performance packages

  Kato, K., Miura, M., Ito, K., Yamaji, Y. & Sudo, T., 1996 Jan 1, In: Proceedings - Electronic Components and Technology Conference. p. 739-746 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)
• 2009

  On-chip temperature control under suspended microbridge for cell immobilization and culture system

  Yamanishi, Y., Teramoto, J., Magariyama, Y., Ishihama, A., Fukuda, T. & Arai, F., 2009 Jan 1, Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1683-1685 3 p. (Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2011

  Development of Gyro Mechanism that Controls Posture of Motorcycles

  Mitsuhashi, Y. & Furukawa, Y., 2011 Sep 8, In: Proc. of FAST-zero'11 Symposium.

  Research output: Contribution to journal › Article › peer-review
• 2015

  Secondary organic aerosol composition formed from volatile organic compounds on various environmental conditions

  Arai, M., Kagi, N., Fujii, S., Namiki, N., Sekiguchi, K., Azuma, K., Suwa, Y. & Tamura, H., 2015.

  Research output: Contribution to conference › Paper › peer-review

• A high resolution time-to-digital converter utilizing coupled oscillator, ORIGAMI

  Shima, T. & Nicodimus, R., 2015 Oct 16, 2015 European Conference on Circuit Theory and Design, ECCTD 2015. Institute of Electrical and Electronics Engineers Inc., 7300110

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2016

  Study on tribological properties of polyisobutylene lubricant for use in screw tightening

  Otsu, T., Komatsu, K. & Hashimura, S., 2016, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 61, 12, p. 866-873 8 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2007

  Effects of pore morphology on fatigue strength and fracture surface of lotus-type porous copper

  Seki, H., Tane, M., Otsuka, M. & Nakajima, H., 2007 May, In: Journal of Materials Research. 22, 5, p. 1331-1338 8 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2013

  A circularly polarized triple-loop antenna with a single feed

  Hirose, K., Nakagawa, H., Shibasaki, T. & Nakano, H., 2013 Dec 1, 2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Proceedings. p. 924-925 2 p. 6711121. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  Analysis of information provision methods for indoor navigation using interactive floor projection

  Suyama, M., Hayashi, F. & Sasaki, T., 2018 Feb 1, SII 2017 - 2017 IEEE/SICE International Symposium on System Integration. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 1010-1015 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2010

  The valediction by the ex-president

  Machida, H., 2010 Sep 22, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 55, 7, 1 p.

  Research output: Contribution to journal › Article › peer-review
• 2013

  Remote cognitive rehabilitation support system for menu and meal preparation

  Sano, M., Ohtani, K., Miyawaki, K., Yonemura, S., Mitsumori, H. & Ohde, M., 2013 Jan 1, CEA 2013 - Proceedings of the 5th International Workshop on Multimedia for Cooking and Eating Activities. Association for Computing Machinery, p. 27-32 6 p. (CEA 2013 - Proceedings of the 5th International Workshop on Multimedia for Cooking and Eating Activities).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 1999

  Experimental Study on the Deterioration of Adhesion Property of Continuous Fiber Sheet

  Katsuki, F. & Maruyama, F. KT. UY. MK., 1999 Nov 1, In: Fourth International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (Separate Volume). p. 45-56

  Research output: Contribution to journal › Article › peer-review
• 2008

  Trial Forming of Artificial Bone by Inkjet-type Powder-layered Manufacturing

  Yamazawa, K., Anzai, M., Himeno, R., Suzuki, H., Narahara, H. & Suzuki, S., 2008 Mar 1, In: International Journal of Automation Technology. Vol.2, p. 156-161

  Research output: Contribution to journal › Article › peer-review
• 2004

  One-wavelength planer antenna with unbalanced feed

  HIROSE, K., ARAO, Y. & NAKANO, H., 2004 Mar 23, In: General conference of IEICE. B, p. 130

  Research output: Contribution to journal › Article › peer-review
• 2017

  第2章「働き方に関する埼玉県を取り巻く状況」

  Nagahara, T., 2017 Mar, 多様な働き方「埼玉スタイル」の推進: 平成28年度政策課題共同研究研究報告書. 彩の国さいたま人づくり広域連合, p. 14 22 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter (peer-reviewed)
• 1996

  Synthetic criterion for level-1 crack-free package - proposal of a superior package structure

  Inoue, Y., Sawada, K., Kawamura, N. & Sudo, T., 1996 Jan 1, In: Proceedings - Electronic Components and Technology Conference. p. 71-77 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)
• 2021

  Utilization of Behavior Data Due to Differences in Determination of Activity

  Anzai, R. & Yang, W. S., 2021, Advances in Industrial Design - Proceedings of the AHFE 2021 Virtual Conferences on Design for Inclusion, Affective and Pleasurable Design, Interdisciplinary Practice in Industrial Design, Kansei Engineering, and Human Factors for Apparel and Textile Engineering, 2021. Shin, C. S., Di Bucchianico, G., Fukuda, S., Ghim, Y-G., Montagna, G. & Carvalho, C. (eds.). Springer Science and Business Media Deutschland GmbH, p. 40-46 7 p. (Lecture Notes in Networks and Systems; vol. 260).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  Column: The vibe

  Heneghan, T., 2018 Jan 1, In: A + U-Architecture and Urbanism. 2018-January, 576, p. 114-115 2 p.

  Research output: Contribution to journal › Short survey › peer-review
• 2009

  Covert representation of second-next movement in the pre-supplementary motor area of monkeys

  Nakajima, T., Hosaka, R., Mushiake, H. & Tanji, J., 2009 Apr, In: Journal of neurophysiology. 101, 4, p. 1883-1889 7 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)