Find Research outputs

Search results

• 2002

  Resin-impregnated bulk RE-Ba-Cu-O current leads for the superconducting magnet on maglev train

  Tomita, M., Nagashima, K., Herai, T. & Murakami, M., 2002 Aug, In: Physica C: Superconductivity and its applications. 372-376, PART 2, p. 1216-1220 5 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)
• 2009

  Consensus algorithms for multi-agent systems: A matrix inequality based approach

  Zhai, G., Okuno, S., Imae, J. & Kobayashi, T., 2009, Proceedings of the 2009 IEEE International Conference on Networking, Sensing and Control, ICNSC 2009. p. 891-896 6 p. 4919398. (Proceedings of the 2009 IEEE International Conference on Networking, Sensing and Control, ICNSC 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)
• 2006

  Person Following Robot ApriAttenda(TM)

  Yoshimi, T., Nishiyama, M., Sonoura, T., Nakamoto, H., Tokura, S., Sato, H., Ozaki, F., Matsuhira, N. & Mizoguchi, H., 2006 Oct 11, In: Proc. of the 2006 IEEE/RSJ Int. Conf. on Intelligent Robot and Systems (IROS2006). p. Video 1 #7

  Research output: Contribution to journal › Article › peer-review
• 2008

  Magnetic properties of a melt-textured pellet of (Nd_0.33Eu _0.38Gd_0.28)Ba₂Cu₃O_y + 0.035 mol% Zn

  Jirsa, M., Rameś, M. & Muralidhar, M., 2008 Jan, In: Acta Physica Polonica A. 113, 1, p. 223-226 4 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)
• 2000

  Properties of melt-textured superconductors

  Murakami, M., 2000 Jun, In: JOM. 52, 6, p. 22-24 3 p.

  Research output: Contribution to journal › Article › peer-review
• 2001

  Bitter pattern study of flux distribution in the BSCCO (2212)

  Yasuda, E., Chikumoto, N., Nakayama, Y., Kishio, K., Nagatomo, T. & Murakami, M., 2001 Aug, In: Physica C: Superconductivity and its applications. 357-360, p. 564-567 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2003

  Coordination of torsional controller for parallel turbine-generator system operation

  Kakinoki, T., Yokoyama, R., Fujita, G., Koyanagi, K. & Funabashi, T., 2003 Dec 1, p. 108-111. 4 p.

  Research output: Contribution to conference › Paper › peer-review
• 2020

  High-temperature short-range order in Mn₃RhSi

  Yamauchi, H., Sari, D. P., Watanabe, I., Yasui, Y., Chang, L. J., Kondo, K., Ito, T. U., Ishikado, M., Hagihara, M., Frontzek, M. D., Chi, S., Fernandez-Baca, J. A., Lord, J. S., Berlie, A., Kotani, A., Mori, S. & Shamoto, S. I., 2020 Dec, In: Communications Materials. 1, 1, 43.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)
• 2014

  Effect of Sintering Time on the Optimal Synthesis Condition in MgB₂

  Ishiwata, J., Muralidhar, M., Koshizuka, N., Inoue, K. & Murakami, M., 2014, In: Physics Procedia. 58, p. 102-105 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)
• 2018

  Development, challenges, and prospects of carbon-based electrode for lithium-air batteries

  Li, O. L. & Ishizaki, T., 2018 Jan 1, Emerging Materials for Energy Conversion and Storage. Elsevier, p. 115-152 38 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  12 Citations (Scopus)
• 2011

  Nobel Fabrication of NIR-Vis Upconversion NaYF4:Ln(Ln=Yb,Er,Tm)Crystal Layers by Flux Coating Method

  Ishizaki, T., 2011, In: Journal of Materials Chemistry. 21, p. 13847-13852

  Research output: Contribution to journal › Article › peer-review
• 2019

  Conceptual Study on the Influence of the Physical & Social Neighborhood Environment on Active Aging in Johor Bahru, Malaysia

  Nordin, N. B. & Nakamura, H., 2019 Mar.

  Research output: Contribution to conference › Abstract › peer-review
• 2018

  FTIR-based Touch Pad for Smartphone-based HMD Enhancement

  Kitade, T., Yamada, W. & Manabe, H., 2018 Oct 11, UIST 2018 Adjunct - Adjunct Publication of the 31st Annual ACM Symposium on User Interface Software and Technology. Association for Computing Machinery, Inc, p. 174-175 2 p. (UIST 2018 Adjunct - Adjunct Publication of the 31st Annual ACM Symposium on User Interface Software and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2002

  Direct Detection of Superoxide Anion Generated in C60-Photosensitized Oxidation of NADH and an Analogue by Molecular Oxygen

  Nakanishi, I., Ohkubo, K., Fujita, S., Fukuzumi, S., Konishi, T., Fujitsuka, M., Ito, O. & Miyata, N., 2002 Jul 26, In: J. Chem. Soc., Perkin Trans. 2. 2002, p. 1829-1833

  Research output: Contribution to journal › Article › peer-review

  20 Citations (Scopus)

• Anisotropic superconducting properties of MgB₂ single crystals probed by in-plane electrical transport measurements

  Eltsev, Y., Lee, S., Nakao, K., Chikumoto, N., Tajima, S., Koshizuka, N. & Murakami, M., 2002 Apr 1, In: Physical Review B - Condensed Matter and Materials Physics. 65, 14, p. 1405011-1405014 4 p., 140501.

  Research output: Contribution to journal › Article › peer-review
  145 Citations (Scopus)

• Matrix chemical ratio and its optimization for highest flux pinning in ternary (Nd-Eu-Gd)Ba₂Cu₃O_y

  Muralidhar, M., Jirsa, M., Sakai, N. & Murakami, M., 2002 May 1, In: Superconductor Science and Technology. 15, 5, p. 688-693 6 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2004

  Power System Stability Improvement Using Doubly-Fed Rotary Frequency Converter

  Nakamura, A., Fujita, G., Yokoyama, R., Koyanagi, K. & Funabashi, T., 2004 Jul 1, In: ICEE 2004 Sapporo.

  Research output: Contribution to journal › Article › peer-review
• 2006

  Decentralized H2 Controller Design for Descriptor Systems: An LMI Approach;

  Zhai, G., Yoshida, M., Imae, J. & Kobayashi, T., 2006 Mar 1, In: Nonlinear Dynamics and Systems Theory. 6, p. 98-108

  Research output: Contribution to journal › Article › peer-review
• 2002

  Fabrication of ball end mills for high speed milling and their cutting characteristics

  Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristicsYi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M., 2002 Mar, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, p. 451 1 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  1 Citation (Scopus)
• 2000

  Switching performance of Nb3Sn persistent current switch

  Tomita, M., Nemoto, K., Sugawara, K. & Murakami, M., 2000 Nov, In: Physica C: Superconductivity and its applications. 341-348 (IV), p. 2633-2634 2 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)
• 2012

  Proposal of new module-style power system training device

  Hitotsumatsu, Y. & Fujita, G., 2012 Dec 1, Proceedings - 2012 47th International Universities Power Engineering Conference, UPEC 2012. 6398680. (Proceedings of the Universities Power Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2003

  Host-Guest Complexation Effect on a C60-Porphyrin Light-to-Photocurrent Conversion System

  Ikeda, A., Hatano, T., Konishi, T., Kikuchi, J. & Shinkai, S., 2003 Apr 1, In: Electrochemical Society Proceedings, (Fullerenes and Nanotubes: The Building Blocks of Next Generation Nanodevices). 2003, p. 164-174

  Research output: Contribution to journal › Article › peer-review
• 2008

  Editorial

  Cardwell, D. A., Murakami, M. & Salama, K., 2008 Jun 15, In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 151, 1, p. 1 1 p.

  Research output: Contribution to journal › Editorial › peer-review
• 2001

  Microstructure of (Nd, Eu, Gd)-123 matrix with (Nd, Eu, Gd)-211 inclusions

  Muralidhar, M., Jirsa, M., Iida, K., Sakai, N. & Murakami, M., 2001 Feb, In: Journal of Materials Research. 16, 2, p. 407-412 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2004

  Flux motion in Y-Ba-Cu-O bulk superconductors during pulse field magnetization

  Yoshizawa, K., Nariki, S., Sakai, N., Murakami, M., Hirabayasi, I. & Takizawa, T., 2004 Feb 1, In: Superconductor Science and Technology. 17, 2, p. S74-S78

  Research output: Contribution to journal › Article › peer-review
• 2002

  Magnetization behavior of MgB₂ and the effect of high energy heavy-ion irradiation

  Chikumoto, N., Yamamoto, A., Konczykowski, M. & Murakami, M., 2002 Oct 1, In: Physica C: Superconductivity and its applications. 378-381, PART 1, p. 466-469 4 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)
• 2010

  High speed machining: a review from a viewpoint of chip formation

  Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M., 2010 Oct 9, In: Proceedings of the Fourth International Conference on High Speed Machining.

  Research output: Contribution to journal › Article › peer-review
• 1996

  Low magnetic relaxation in a single crystal and a melt processed NdBa₂Cu₃O_7-δ sample

  Van Dalen, A. J. J., Koblischka, M. R., Kojo, H., Sawada, K., Higuchi, T. & Murakami, M., 1996 Aug 1, In: Superconductor Science and Technology. 9, 8, p. 659-664 6 p.

  Research output: Contribution to journal › Article › peer-review
  33 Citations (Scopus)
• 2004

  Mechanical properties of Gd123 bulk superconductor at liquid nitrogen temperature

  Murakami, A., Katagiri, K., Kasaba, K., Shoji, Y., Noto, K., Teshima, H., Sawamura, M. & Murakami, M., 2004 Jun, In: IEEE Transactions on Applied Superconductivity. 14, 2, p. 1050-1053 4 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)
• 2016

  EBSD analysis of MgB₂ bulk superconductors

  Koblischka-Veneva, A. D., Koblischka, M. R., Schmauch, J., Inoue, K., Muralidhar, M., Berger, K. & Noudem, J., 2016 Mar 11, In: Superconductor Science and Technology. 29, 4, 044007.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2008

  Development of movable machine tool with multi spindles and axes (Evaluation of machining accuracy in simultaneous multi spindle machining)

  Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y., 2008 Apr, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 74, 4, p. 991-996 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2009

  Real-time optimisation for parallel-parking control of four-wheeled vehicles

  Imae, J., Yoshimura, K., Zhai, G. & Kobayashi, T., 2009, In: International Journal of Modelling, Identification and Control. 6, 3, p. 255-262 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2012

  Nonlinear control of DFIG under symmetrical voltage dips with demagnetizing current solution

  Nguyen, T. D. V. & Fujita, G., 2012, 2012 IEEE International Conference on Power System Technology, POWERCON 2012. 6401383. (2012 IEEE International Conference on Power System Technology, POWERCON 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)
• 2011

  On hard and fuzzy c-means clustering with conditionally positive definite kernel

  Kanzawa, Y., Endo, Y. & Miyamoto, S., 2011 Sep 27, FUZZ 2011 - 2011 IEEE International Conference on Fuzzy Systems - Proceedings. p. 816-820 5 p. 6007431. (IEEE International Conference on Fuzzy Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2006

  Book Review on "Switched and Impulsive Systems: Analysis, Design, and Applications" (by Zhengguo Li, Yengchai Soh, and Changyun Wen)

  Zhai, G., 2006 Dec 1, In: IEEE Transactions on Automatic Control. 51, p. 2010-2011

  Research output: Contribution to journal › Article › peer-review
• 1997

  Effect of high-temperature heat-treatment on the pinning properties of melt-textured Nd123

  Chikumoto, N., Yoshioka, J., Otsuka, M., Hayashi, N. & Murakami, M., 1997 Aug 1, In: Physica C: Superconductivity and its applications. 281, 2-3, p. 253-259 7 p.

  Research output: Contribution to journal › Article › peer-review
  39 Citations (Scopus)
• 1996

  Ultra high speed milling and cutting tools

  Anzai, M., Takahashi, I. & Matsuoka, T., 1996 Dec 1, In: International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2010

  Quantizer design for interconnected feedback control systems

  Zhai, G., Chen, N. & Gui, W., 2010 Jan, In: Journal of Control Theory and Applications. 8, 1, p. 93-98 6 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 1994

  D.C susceptibility studies on silver doped BPSCCO (2223) superconductors

  Muralidhar, M., Satyavathi, S., Kishore, K. N., Pena, O. & Babu, V. H., 1994 Dec, In: Physica C: Superconductivity and its applications. 235-240, PART 5, p. 3199-3200 2 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2007

  Influence of Power Quality on Operation of Protection System

  N.X.Tung, N. X. T., G.Fujita, G. F. & Fujita, G., 2007 Dec 1, In: ISSE2007. p. 63-66

  Research output: Contribution to journal › Article › peer-review
• 2010

  Enhanced J_c in air-processed GdBa₂Cu ₃O_7-δ superconductor bulk grown by the additions of two Nd₂BaCuO₅ seeds

  Zhang, Y. F., Izumi, M., Murakami, M., Wang, D. D. & Li, P. L., 2010 Nov 1, In: Physica C: Superconductivity and its applications. 470, 20, p. 1164-1166 3 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2001

  Ac susceptibility of high-T_c superconductor REBa₂Cu₃O_y

  Enomoto, H., Inoue, K., Muralidhar, M., Murakami, M. & Takizawa, T., 2001 Aug, In: Physica C: Superconductivity and its applications. 357-360, p. 545-547 3 p.

  Research output: Contribution to journal › Article › peer-review

• Flux pinning in melt-processed ternary (Nd-Eu-Gd) and Nd-based superconductors

  Pradhan, A. K., Muralidhar, M., Feng, Y., Shibata, S., Murakami, M., Nakao, K. & Koshizuka, N., 2001 Mar, In: IEEE Transactions on Applied Superconductivity. 11, 1 III, p. 3706-3711 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)
• 2006

  Experimental study on improvement of transient stability with braking resistor

  Iida, S., Imamura, S., Shirai, G. & Fujita, G., 2006 Sep 18, In: IEEJ Transactions on Power and Energy. 126, 9, p. 894-900 7 p.

  Research output: Contribution to journal › Article › peer-review
• 2003

  Improvement of the trapping capacity of bulk superconductor with resin impregnation

  Tomita, M. & Murakami, M., 2003 Jun, In: IEEE Transactions on Applied Superconductivity. 13, 2 III, p. 3095-3098 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)
• 1994

  Effect of BaSnO₃ additions in MPMG-processed YBCO

  Monot, I., Higuchi, T., Sakai, N. & Murakami, M., 1994 Nov 10, In: Physica C: Superconductivity and its applications. 233, 1-2, p. 155-164 10 p.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)
• 2000

  Novel melt processing for Gd-Ba-Cu-O system

  Chauhan, H. S. & Murakami, M., 2000 Jun 1, In: Superconductor Science and Technology. 13, 6, p. 753-755 3 p.

  Research output: Contribution to journal › Conference article › peer-review
• 1999

  Improvement of critical current densities in bulk superconductors of the 123-type

  Muralidhar, M., Koblischka, M. R. & Murakami, M., 1999 Jan 1, In: Physica Status Solidi (A) Applied Research. 171, 2, p. R7-R8

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)
• 2000

  Confirmation of Ba-rich Nd_1+xBa_2-xCu₃O_7-δ solid solutions

  Osabe, G., Yoo, S. I., Sakai, N., Higuchi, T., Takizawa, T., Yasohama, K. & Murakami, M., 2000 Jun 1, In: Superconductor Science and Technology. 13, 6, p. 637-640 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  21 Citations (Scopus)
• 1996

  Decentralized H_∞ controller design for large-scale systems: a matrix inequality approach using a homotopy method

  Ikeda, M., Zhai, G. & Fujisaki, Y., 1996, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). (Proceedings of the IEEE Conference on Decision and Control; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  17 Citations (Scopus)