Find Research outputs

Search results

• 2004

  Power System Stability Improvement Using Doubly-Fed Rotary Frequency Converter

  Nakamura, A., Fujita, G., Yokoyama, R., Koyanagi, K. & Funabashi, T., 2004 Jul 1, In: ICEE 2004 Sapporo.

  Research output: Contribution to journal › Article › peer-review
• 2006

  Decentralized H2 Controller Design for Descriptor Systems: An LMI Approach;

  Zhai, G., Yoshida, M., Imae, J. & Kobayashi, T., 2006 Mar 1, In: Nonlinear Dynamics and Systems Theory. 6, p. 98-108

  Research output: Contribution to journal › Article › peer-review
• 2002

  Fabrication of ball end mills for high speed milling and their cutting characteristics

  Translated title of the contribution: Fabrication of ball end mills for high speed milling and their cutting characteristicsYi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M., 2002 Mar, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, p. 451 1 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  1 Citation (Scopus)
• 2012

  Proposal of new module-style power system training device

  Hitotsumatsu, Y. & Fujita, G., 2012 Dec 1, Proceedings - 2012 47th International Universities Power Engineering Conference, UPEC 2012. 6398680. (Proceedings of the Universities Power Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2003

  Host-Guest Complexation Effect on a C60-Porphyrin Light-to-Photocurrent Conversion System

  Ikeda, A., Hatano, T., Konishi, T., Kikuchi, J. & Shinkai, S., 2003 Apr 1, In: Electrochemical Society Proceedings, (Fullerenes and Nanotubes: The Building Blocks of Next Generation Nanodevices). 2003, p. 164-174

  Research output: Contribution to journal › Article › peer-review
• 2010

  High speed machining: a review from a viewpoint of chip formation

  Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M., 2010 Oct 9, In: Proceedings of the Fourth International Conference on High Speed Machining.

  Research output: Contribution to journal › Article › peer-review
• 2008

  Development of movable machine tool with multi spindles and axes (Evaluation of machining accuracy in simultaneous multi spindle machining)

  Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y., 2008 Apr, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 74, 4, p. 991-996 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2009

  Real-time optimisation for parallel-parking control of four-wheeled vehicles

  Imae, J., Yoshimura, K., Zhai, G. & Kobayashi, T., 2009, In: International Journal of Modelling, Identification and Control. 6, 3, p. 255-262 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2012

  Nonlinear control of DFIG under symmetrical voltage dips with demagnetizing current solution

  Nguyen, T. D. V. & Fujita, G., 2012, 2012 IEEE International Conference on Power System Technology, POWERCON 2012. 6401383. (2012 IEEE International Conference on Power System Technology, POWERCON 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)
• 2006

  Book Review on "Switched and Impulsive Systems: Analysis, Design, and Applications" (by Zhengguo Li, Yengchai Soh, and Changyun Wen)

  Zhai, G., 2006 Dec 1, In: IEEE Transactions on Automatic Control. 51, p. 2010-2011

  Research output: Contribution to journal › Article › peer-review
• 1996

  Ultra high speed milling and cutting tools

  Anzai, M., Takahashi, I. & Matsuoka, T., 1996 Dec 1, In: International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2010

  Quantizer design for interconnected feedback control systems

  Zhai, G., Chen, N. & Gui, W., 2010 Jan, In: Journal of Control Theory and Applications. 8, 1, p. 93-98 6 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 1994

  D.C susceptibility studies on silver doped BPSCCO (2223) superconductors

  Muralidhar, M., Satyavathi, S., Kishore, K. N., Pena, O. & Babu, V. H., 1994 Dec, In: Physica C: Superconductivity and its applications. 235-240, PART 5, p. 3199-3200 2 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2007

  Influence of Power Quality on Operation of Protection System

  N.X.Tung, N. X. T., G.Fujita, G. F. & Fujita, G., 2007 Dec 1, In: ISSE2007. p. 63-66

  Research output: Contribution to journal › Article › peer-review
• 2006

  Experimental study on improvement of transient stability with braking resistor

  Iida, S., Imamura, S., Shirai, G. & Fujita, G., 2006 Sep 18, In: IEEJ Transactions on Power and Energy. 126, 9, p. 894-900 7 p.

  Research output: Contribution to journal › Article › peer-review
• 1996

  Decentralized H_∞ controller design for large-scale systems: a matrix inequality approach using a homotopy method

  Ikeda, M., Zhai, G. & Fujisaki, Y., 1996, Proceedings of the IEEE Conference on Decision and Control. Anon (ed.). (Proceedings of the IEEE Conference on Decision and Control; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  17 Citations (Scopus)
• 1999

  Electron transfer and energy transfer of photoexcited C60 in presence of retinols

  Sasaki, Y., Konishi, T., Yamazaki, M., Fujitsuka, M. & Ito, O., 1999 Apr 1, In: Physical Chemistry Chemical Physics. 1, p. 4555-4561

  Research output: Contribution to journal › Article › peer-review
• 2001

  Fabrication of Ball End Mill for High Speed Milling and Its Characterization

  Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 May 1, In: Default journal. p. 205-208

  Research output: Contribution to journal › Article › peer-review
• 2013

  Distribution network power loss by using Artificial Bee Colony

  Muhtazaruddin, M. N. B. & Fujita, G., 2013 Dec 1, 2013 48th International Universities' Power Engineering Conference, UPEC 2013. 6714964. (Proceedings of the Universities Power Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)
• 1995

  Rapid prototyping for direct manufacturing of metallic parts

  Nakagawa, T. & Anzai, M., 1995, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 64, 7, p. 505-510 6 p.

  Research output: Contribution to journal › Article › peer-review
• 2009

  Evaluate Detection Methods for Anti-Islanding of Dispersed Generation

  Nguyen, D. T., Fujita, G., Yokoyama, R. & Koyanagi, K., 2009 Dec 1, In: 2009 International Symposium on Sustainable Energy (ISSE2009).

  Research output: Contribution to journal › Article › peer-review
• 2021

  Dynamical Analysis and Sampled-Data Stabilization of Memristor-Based Chua's Circuits

  Gunasekaran, N., Srinivasan, S., Zhai, G. & Yu, Q., 2021, In: IEEE Access. 9, p. 25648-25658 11 p., 9335967.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)
• 2020

  Study on Departure Time Choice of Tourism Purpose Trips with the Perception of Predicted Near-future Traffic Condition-An Experiment Using a Mobile Application

  Le, Y., Aoyagi, S., Shimizu, T. & Takahashi, K., 2020 Sep, 2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020. Institute of Electrical and Electronics Engineers Inc., p. 141-145 5 p. 9231518. (2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2022

  Study of crystal structure and magnetic properties of Eu _2-x+0.01Ce_x-0.01Cu_0.99Fe_0.01O_{4+ α-δ}

  Anggia, H. D., Rochman, L. P., Pratama, R., Maulana, T., Winarsih, S., Maryati, Y., Syakuur, M. A., Widyaswari, U., Sari, D. P., Saragi, T. & Risdiana, 2022 Jan 28, In: Journal of Physics: Conference Series. 2165, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
• 2007

  Real time object tracking on video image sequence using particle swarm optimization

  Kobayashi, T., Nakagawa, K., Imae, J. & Guisheng, Z., 2007, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 1773-1778 6 p. 4406632. (ICCAS 2007 - International Conference on Control, Automation and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  19 Citations (Scopus)
• 2008

  Operation of micro grid with renewal sources

  Chiba, Y., Yokoyama, R., Fujita, G., Koyanagi, K., Funabashi, T. & Nomura, M., 2008, ECOS 2008 - Proceedings of the 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Silesian University of Technology, p. 1215-1221 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2012

  Decentralized H-infinity Control of Interconnected Systems via Quantized Dynamic Output Feedback

  ZHAI, G., CHEN, N. & GUI, W., 2012 Aug 8, In: Proceedings of 2012 IEEE International Conference on Mechatronics and Automation. p. 2065-2070

  Research output: Contribution to journal › Article › peer-review
• 1999

  Linear Matrix Inquality Based TCSC Contoroller Considering Load Characterstic

  Ishimaru, M., Shirai, G., Fujita, G. & Yokoyama, R., 1999 Aug 1, In: The International Conference on Electrical Engoneering’99(ICEE’99). p. 105-108

  Research output: Contribution to journal › Article › peer-review

• A Mobile Robot Navigation by Means of Range Data from Ultra Wide Angle Laser Sensor and Simple Linguistic Behavior Instructions Control

  Tsubouchi, T., Ando, Y., Yuta, S. & Andou, Y., 1999 Mar 1, In: Springer LNCIS, Experimental Robotics VI. Vol.250, p. 89-97

  Research output: Contribution to journal › Article › peer-review
• 2007

  "ApriAttenda(TM)", a Person Following Robot with Vision Based Target Detection

  T.Yoshimi, T. Y. & Yoshimi, T., 2007 Jan 22, In: Workshop on Human Robot Interaction and Ambient Intelligence.

  Research output: Contribution to journal › Article › peer-review
• 1996

  Ultra High Speed Milling and Tools

  ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 Apr 1, In: International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

  Research output: Contribution to journal › Article › peer-review
• 2019

  Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

  Nakai, H., Sawa, T. & Anzai, M., 2019, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (ed.). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; vol. 825 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2005

  Kelvin force microscopic investigation into DNA hybridization and mismatch

  Ishizaki, T., Saito, N. & Takai, O., 2005, In: Default journal. p. 260

  Research output: Contribution to journal › Article › peer-review
• 2007

  Local generation of carboxyl groups on an organic monolayer through chemical conversion using scanning probe anodization

  Lee, S. H., Ishizaki, T., Saito, N. & Takai, O., 2007 Sep, In: Materials Science and Engineering C. 27, 5-8 SPEC. ISS., p. 1241-1246 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)
• 1999

  Lamination of metal sheets

  Himmer, T., Nakagawa, T. & Anzai, M., 1999 Jun, In: Computers in Industry. 39, 1, p. 27-33 7 p.

  Research output: Contribution to journal › Article › peer-review
  37 Citations (Scopus)

• Tool Wear Characteristics of Small Diameter Ball End Mill on Ultra High Speed Milling at l00000min"' Rotation Speed

  Takahashi, I., Anzai, M. & Nakagawa, T., 1999, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 6, p. 867-871 5 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2012

  Catchment-scale reconstruction of glacier mass balance using observations and global climate data: Case study of the Hailuogou catchment, south-eastern Tibetan Plateau

  Zhang, Y., Hirabayashi, Y. & Liu, S., 2012 Jun 11, In: Journal of Hydrology. 444-445, p. 146-160 15 p.

  Research output: Contribution to journal › Article › peer-review
  40 Citations (Scopus)
• 2017

  Analysis of urban environment settings in the city of Cotonou in the Republic of Benin

  Ekpodessi, S. & Nakamura, H., 2017 Mar, Proceedings of the 11th South East Asian Technical University Consortium Symposium (SEATUC 2017). 8 p. OS03-01

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  A study on anomaly prediction method of machine tools - Feature extraction for anomaly prediction

  Fujita, R. & Yoshimi, T., 2018 Feb 7, 2017 Asian Control Conference, ASCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 1505-1508 4 p. (2017 Asian Control Conference, ASCC 2017; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2000

  L2 Gain Analysis of Time-Controlled Switched Systems

  Zhai, G., Hu, B., Yasuda, K. & Michel, A. N., 2000 May 25, In: Default journal. p. 91-94

  Research output: Contribution to journal › Article › peer-review
• 2022

  Effect of Surface Modification for Carbon Cathode Materials on Charge–Discharge Performance of Li-Air Batteries

  Fukushima, K., Lee, S. Y., Tanaka, K., Sasaki, K. & Ishizaki, T., 2022 May 1, In: Materials. 15, 9, 3270.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)
• 2006

  Design of Robust Decentralized H∞ Control for Interconnected Descriptor Systems with Norm-Bounded Parametric Uncertainties

  Chen, N., Gui, W. & Zhai, G., 2006 Oct 4, In: Proceedings of the 2006 IEEE International Symposium on Intelligent Control (ISIC06). p. 3070-3075

  Research output: Contribution to journal › Article › peer-review
• 2013

  Design of quantised dynamic output feedback for decentralised H∞ control systems

  Zhai, G., Chen, N. & Gui, W., 2013, In: IET Control Theory and Applications. 7, 10, p. 1408-1414 7 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2006

  Field tests of a microgrid control system

  Funabashi, T., Fujita, G., Koyanagi, K. & Yokoyama, R., 2006 Dec 1, 41st International Universities Power Engineering Conference, UPEC 2006, Conference Procedings. p. 232-236 5 p. 4218679. (41st International Universities Power Engineering Conference, UPEC 2006, Conference Procedings; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Citations (Scopus)
• 2021

  Effect of nio nanoparticle addition on the structural, microstructural, magnetic, electrical, and magneto-transport properties of la_0.67 ca_0.33 mno₃ nanocomposites

  Lau, L. N., Lim, K. P., Chok, S. Y., Ishak, A. N., Hon, X. T., Wong, Y. J., Awang Kechik, M. M., Chen, S. K., Ibrahim, N. BY., Miryala, M., Murakami, M. & Shaari, A. H., 2021 Jul, In: Coatings. 11, 7, 835.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)
• 2007

  Stabilizability and practical stabilizability of continuous-time switched systems: A unified view

  Xu, P., Zhai, G. & He, S., 2007, Proceedings of the 2007 American Control Conference, ACC. p. 663-668 6 p. 4282211. (Proceedings of the American Control Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  24 Citations (Scopus)
• 2009

  A matrix inequality based design method for consensus problems in multi-agent systems

  Zhai, G., Okuno, S., Imae, J. & Kobayashi, T., 2009 Dec 1, In: International Journal of Applied Mathematics and Computer Science. 19, 4, p. 639-646 8 p.

  Research output: Contribution to journal › Article › peer-review
  20 Citations (Scopus)
• 2002

  Common quadratic Lyapunov-like functions with associated switching regions for two unstable second-order LTI systems

  Hu, B., Zhai, G. & Michel, A. N., 2002 Sep 20, In: International Journal of Control. 75, 14, p. 1127-1135 9 p.

  Research output: Contribution to journal › Article › peer-review
  43 Citations (Scopus)
• 2006

  Design of robust decentralized H_∞ control for interconnected descriptor systems with norm-bounded parametric uncertainties

  Chen, N., Gui, W. & Zhai, G., 2006, Proceedings of the 2006 IEEE International Symposium on Intelligent Control, ISIC. p. 3070-3075 6 p. 4064997. (IEEE International Symposium on Intelligent Control - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2011

  High performance batch production of LREBa₂Cu₃O _y using novel thin film Nd-123 seed

  Muralidhar, M., Suzuki, K., Fukumoto, Y., Ishihara, A. & Tomita, M., 2011 Nov, In: Physica C: Superconductivity and its applications. 471, 21-22, p. 834-839 6 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)