Find Research outputs

Search results

• 1986

  Best choice problem with random population size and twice stops

  Ano, K., 1986 Aug 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review
• 1999

  High performance production of Bi₂Te₃ based thermoelectric materials on the route of the bulk mechanical alloying method

  Iwaisako, Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1999 Dec 1, In: International Conference on Thermoelectrics, ICT, Proceedings. p. 234-237 4 p.

  Research output: Contribution to journal › Conference article › peer-review
• 1986

  Computer diagnosis system for thermal analysis by BEM aided with simple CAD

  Aizawa, T., Kihara, J. & Umeda, T., 1986 Dec 1, In: Engineering with Computers. 1, 4, p. 175-191 17 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2004

  Dynamic deformation of regularly cell-structured materials

  Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 2004 Jan 1, Explosion, Shock Wave and Hypervelocity Phenomena in Materials. Itoh, S., Hokamoto, K. & Fujita, M. (eds.). Trans Tech Publications Ltd, p. 13-20 8 p. (Materials Science Forum; vol. 465-466).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 1983

  SUPERPOSITION METHOD FOR NONLINEAR CRACK PROBLEMS.

  Yagawa, G. & Aizawa, T., 1983 Dec 1, In: ASTM Special Technical Publication. p. 354-369 16 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)
• 2004

  Micro structure of N-implanted Ti thin films prepared by ion beam sputtering deposition

  Muraishi, S. & Aizawa, T., 2004 May 11, p. 155-162. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)
• 1800

  Progressive steps in the platform science and technology for advanced magnesium alloys..

  Kojima, Y., Aizawa, T., Kamado, S. & Higashi, K., 1800, In: Materials Science Forum. 419-422 (2003), p. 3-20

  Research output: Contribution to journal › Article › peer-review
• 2004

  Solid-state processing of nano-structured thermoelectric materials via bulk mechanical alloying.

  Aizawa, T., Song, R., Kondoh, K., Yamamoto, A. & Obara, H., 2004 Mar 8, In: Default journal.

  Research output: Contribution to journal › Article › peer-review
• 1800

  Experimental and theoretical evaluation on thermoelectricity for SPS-joined p-n module in Bi-Te system.

  Kim, S. S., Yamamoto, S., Aizawa, T. & Yamamoto, A., 1800, In: Materials Transactions.. 46 [7] (2005), p. 1506-1513

  Research output: Contribution to journal › Article › peer-review
• 2003

  N-implanted Ti thin film prepared by ion beam sputtering deposition.

  Muraishi, S. & Aizawa, T., 2003 Jun 1, In: J. Ceramic Transaction.. 148 (2004), p. 155-163

  Research output: Contribution to journal › Article › peer-review
• 1995

  Shock reactive processing for direct synthesis of refractory metal aluminides from elemental powders

  Aizawa, T., Kamenosono, S., Asakawa, Y. & Kihara, J., 1995 Mar 1, In: Journal of Faculty of Engineering, The University of Tokyo. XLII, p. 57-101

  Research output: Contribution to journal › Article › peer-review
• 1800

  Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route.

  Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Sceience Forum.

  Research output: Contribution to journal › Article › peer-review
• 2015

  Micro-texturing into DLC/diamond coated molds and dies via high density oxygen plasma etching

  Yunata, E. E. & Aizawa, T., 2015, In: Manufacturing Review. 2, 2015015.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 1996

  Elasto-plastic contact analysis in rolling by two dimensional boundary element method.

  Kamimura, Y., Aizawa, T. & Kihara, J., 1996 Aug 1, In: Boundary Element Methods. (1996), p. 277-285

  Research output: Contribution to journal › Article › peer-review

  7 Citations (Scopus)
• 1995

  Shock reactive mechanism for direct synthesis of titanium aluminides from element powder mixture.

  Aizawa, T., Kamenosono, S., Tanaka, K. & Kihara, J., 1995 Jul 1, In: Metallurgical and Materials Applications of Shock-Wave and High Strain-Rate Phenomena.. (1995), p. 645-652

  Research output: Contribution to journal › Article › peer-review
• 2003

  Friction and wear properties of CrAlN and CrVN films deposited by cathodic arc ion plating method..

  Uchida, M., Nihira, N., Mitsuo, A., Toyoda, K., Kubota, K. & Aizawa, T., 2003 Apr 1, In: Default journal. 177-178 (2004), p. 627-630

  Research output: Contribution to journal › Article › peer-review
• 1997

  Rational inverse analysis on determination of anisotropic elastic stiffness and crystallographic orientation of grains from surface wave velocity distribution:

  Xu, Y., Aizawa, T. & Kihara, J., 1997 Apr 1, In: International Conference on Advanced Technology in Experimental Mechanics. JSME-MMD.

  Research output: Contribution to journal › Article › peer-review
• 2004

  Solid state synthesis of nano-structured magnesium base thermoelectric materials.

  Renbo, S., Muraishi, S. & Aizawa, T., 2004 Oct 1, In: Proc. Powder Metallurgy World Congress-2004.. 4 (2004), p. 87-92

  Research output: Contribution to journal › Article › peer-review
• 2005

  Self-lubrication mechanism via the in-situ formed lubricious oxide tribofilm.

  Aizawa, T., Mitsuo, A., Yamamoto, S., Muraishi, S. & Sumitomo, T., 2005 Apr 1, In: Wear. 259 (2005), p. 708-718

  Research output: Contribution to journal › Article › peer-review

  91 Citations (Scopus)
• 1998

  Shock synthesis of MoSi2-SiCp/SiCw composites from mechanical alloying pretreated precursors.

  Aizawa, T. & Thadhani, N. N., 1998 Apr 1, In: Ceramic Transaction. (Innovative Processing and synthesis of Ceramics, Glasses and compositesⅡ). 94 (1999), p. 273-284

  Research output: Contribution to journal › Article › peer-review

  15 Citations (Scopus)
• 1800

  Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

  Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A290 (2000), p. 139-144

  Research output: Contribution to journal › Article › peer-review
• 2006

  Solid-state synthesis of hydrogen storage Mg₂Co alloys via bulk mechanical alloying

  Wang, Y., Aizawa, T. & Nishimura, C., 2006 Jan 1, In: Materials Transactions. 47, 4, p. 1052-1057 6 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)
• 1992

  Controlled-fracture forming for alumina wires and plates I. Cold-working and resintering characteristic

  Chen, X. M., Aizawa, T. & Kihara, J., 1992 Apr 15, In: Materials Science and Engineering A. 151, 1, p. 45-52 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 1994

  Visualization and insitu characterization of deformed powder compact in cold isostatic pressure.

  Watanabe, T., Aizawa, T. & Kihara, J., 1994 Dec 1, In: Advanced Materials (MRS). 14A (1994), p. 97-100

  Research output: Contribution to journal › Article › peer-review

  22 Citations (Scopus)
• 1800

  Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: J. American Ceramic Society.. 79 (1996), p. 2221-2223

  Research output: Contribution to journal › Article › peer-review
• 2011

  Characteristics of the running performance in Japanese professional soccer players

  ISHIZAKI, S. & YASUMATSU, M., 2011 Jul 9, In: Default journal.

  Research output: Contribution to journal › Article › peer-review
• 1800

  Barrier-free processing of materials for environmentally benign life-cycle design.

  Mabuchi, M., Halada, K. & Aizawa, T., 1800, In: Materials Transaction.. 43 [3] (2002), p. 285-291

  Research output: Contribution to journal › Article › peer-review

• In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

  Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [5] (2003), p. 981-985

  Research output: Contribution to journal › Article › peer-review
• 2011

  Advanced fracture mechanics design of diamond-like carbon against delamination behavior

  Aizawa, T., 2011 Sep 1, In: Recent Trndes in Fracture Mechanics. 10, p. 1-32

  Research output: Contribution to journal › Article › peer-review
• 2018

  An afterburner-powered methane/steam reformer for a solid oxide fuel cells application

  Mozdzierz, M., Chalusiak, M., Kimijima, S., Szmyd, J. S. & Brus, G., 2018 Aug 1, In: Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2331-2341 11 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Flower-like BiVO₄ microspheres and their visible light-driven photocatalytic activity

  Zulkifili, A. N., Fujiki, A. & Kimijima, S., 2018 Jan 31, In: Applied Sciences (Switzerland). 8, 2, 216.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)
• 2016

  Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media

  Kawanami, T., Togashi, K., Fumoto, K., Hirano, S., Zhang, P., Shirai, K. & Hirasawa, S., 2016 Dec 15, In: Energy. 117, p. 562-568 7 p.

  Research output: Contribution to journal › Article › peer-review
  46 Citations (Scopus)
• 2017

  Preparation of corrosion resistant film on Mg-6Al-1Zn-2Ca alloy by steam coating

  Tsunakawa, M., Shimada, Y., Miyashita, T., Lee, H., Nakamura, K., Serizawa, A. & Ishizaki, T., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 10, p. 511-517 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A Mobile Robot for Following, Watching and Detecting Falls for Elderly Care

  Tomoya, A., Nakayama, S., Hoshina, A. & Sugaya, M., 2017 Jan 1, In: Procedia Computer Science. 112, p. 1994-2003 10 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)
• 2004

  Identifiability of motion parameters under perspective stereo vision

  Kano, H., Fujioka, H. & Chen, X., 2004, In: Proceedings of the IEEE Conference on Decision and Control. 4, p. 3605-3610 6 p., ThB12.3.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Implementation and applications of open data network interface 'ORiN'

  Mizukawa, M., Sakakibara, S. & Otera, N., 2004 Dec 1, p. 1413-1416. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  17 Citations (Scopus)
• 2017

  An education curriculum of IoT prototype construction system

  Akiyama, K., Ishihara, M., Ohe, N. & Inoue, M., 2017 Dec 19, 2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. (2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017; vol. 2017-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Particle damping: Noise characteristics and large-scale simulation

  Saeki, M., Mizoguchi, T. & Bitoh, M., 2017 Jan 1, (Accepted/In press) In: JVC/Journal of Vibration and Control.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)
• 2018

  Single bovine serum albumin molecule can hold plural blue-emissive gold nanoclusters: A quantitative study with two-photon excitation

  Kindi, H. A., Mohamed, A., Kajimoto, S., Zhanpeisov, N., Horino, H., Shibata, Y., Rzeznicka, I. I. & Fukumura, H., 2018 Apr 15, In: Journal of Photochemistry and Photobiology A: Chemistry. 357, p. 168-174 7 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)
• 2017

  A new soft-switching strategy for Three-Port Converter to be applied in EV application

  Nguyen, D. D., Fujita, G. & Ta, M. C., 2017 Jul 25, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017. Institute of Electrical and Electronics Engineers Inc., p. 1126-1131 6 p. 7992199. (2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Nonvolatile power gating with MTJ based nonvolatile flip-flops for a microprocessor

  Kudo, M. & Usami, K., 2017 Oct 10, NVMSA 2017 - 6th IEEE Non-Volatile Memory Systems and Applications Symposium. Institute of Electrical and Electronics Engineers Inc., 8064472. (NVMSA 2017 - 6th IEEE Non-Volatile Memory Systems and Applications Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)
• 2016

  Development of a new velocity calibration method for laser velocimetry using multiple scattering points on a single slit aperture

  Shirai, K., Ishimura, S., Kawanami, T. & Hirasawa, S., 2016 Jun 1, In: Microsystem Technologies. 22, 6, p. 1351-1357 7 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2003

  Robust Stability and Disturbance Attenuation Analysis of a Class of Networked Control Systems

  Lin, H., Zhai, G. & Antsaklis, P. J., 2003, In: Proceedings of the IEEE Conference on Decision and Control. 2, p. 1182-1187 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  153 Citations (Scopus)
• 1997

  Neighborhood conditions and k-Factors

  Iida, T. & Nishimura, T., 1997, In: Tokyo Journal of Mathematics. 20, 2, p. 411-418 8 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2017

  A hands-on game by using a brain-computer interface, an immersive head mounted display, and a wearable gesture interface

  Horie, R. & Nawa, R., 2017 Dec 19, 2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. (2017 IEEE 6th Global Conference on Consumer Electronics, GCCE 2017; vol. 2017-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)
• 2018

  High fidelity simulation of low velocity impact behavior of CFRP laminate

  Ebina, M., Yoshimura, A., Sakaue, K. & Waas, A. M., 2018 Oct, In: Composites Part A: Applied Science and Manufacturing. 113, p. 166-179 14 p.

  Research output: Contribution to journal › Article › peer-review
  27 Citations (Scopus)

• Foaming of aluminum foam precursor during friction stir welding

  Hangai, Y., Takada, K., Endo, R., Fujii, H., Aoki, Y. & Utsunomiya, T., 2018 Sep, In: Journal of Materials Processing Technology. 259, p. 109-115 7 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Morphological analysis using geometric parameters for splenic aneurysms

  Kimura, M., Hoshina, K., Kobayashi, M., Yamamoto, S., Ohshima, M. & Watanabe, T., 2018 Feb 1, In: Asian Cardiovascular and Thoracic Annals. 26, 2, p. 133-138 6 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• On-chip intercalated-graphene inductors for next-generation radio frequency electronics

  Kang, J., Matsumoto, Y., Li, X., Jiang, J., Xie, X., Kawamoto, K., Kenmoku, M., Chu, J. H., Liu, W., Mao, J., Ueno, K. & Banerjee, K., 2018 Jan 1, In: Nature Electronics. 1, 1, p. 46-51 6 p.

  Research output: Contribution to journal › Article › peer-review
  45 Citations (Scopus)
• 1994

  Observation of current-discontinuity lines in type-II superconductors

  Schuster, T., Indenbom, M. V., Koblischka, M. R., Kuhn, H. & Kronmüller, H., 1994 Jan 1, In: Physical Review B. 49, 5, p. 3443-3452 10 p.

  Research output: Contribution to journal › Article › peer-review
  128 Citations (Scopus)