Search concepts
|
Selected filters
|
- 22,450 - 22,500 out of 22,870 results
Search results
-
Paper
Photoresponsibility of slide-ring gels modified with azobenzene at α-cyclodextrin
Sakai, T., Nagano, S., Kidowaki, M., Ito, K. & Seki, T., 2005 Dec 1. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Photoresponsive slide-ring gels modified with azobenzene at α-cyclodextrin
Sakai, T., Nagano, S., Kidowaki, M., Ito, K. & Seki, T., 2005 Dec 1. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Physical properties of MOD derived Bi4Ti3O12/Bi2SiO5/Si structures
Yamaguchi, M., Nagatomo, T. & Masuda, Y., 2002, p. 231-234. 4 p.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
Pneumatic micro dispenser system with no dead volume for portable micro chemical device
Hasegawa, T., Omatsu, F., Tsuji, T. & Ikuta, K., 2006 Jan 1, p. 1112-1114. 3 p.Research output: Contribution to conference › Paper › peer-review
5 Citations (Scopus) -
Polyrotaxane-polymer-water aqueous two-phase system
Nagao, Y., Kataoka, T., Kidowaki, M., Changming, Z. & Ito, K., 2005, p. 1233. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip
Hasegawa, T., Omatsu, F. & Ikuta, K., 2008 Jan 1, p. 384-386. 3 p.Research output: Contribution to conference › Paper › peer-review
-
Position correction using elevation map for mobile robot on rough terrain
Uchida, S., Maeyama, S., Ohya, A. & Yuta, S., 1998 Dec 1, p. 582-587. 6 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Position estimation and motion control of omni-directional mobile robot with active caster wheels
Jin, C. H., Yuta, S. & Lee, J. H., 2008, p. 226-231. 6 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Positioning by tree detection sensor and dead reckoning for outdoor navigation of a mobile robot
Maeyama, S., Ohya, A. & Yuta, S., 1994 Dec 1, p. 653-660. 8 p.Research output: Contribution to conference › Paper › peer-review
25 Citations (Scopus) -
Position Rectification Control for Mecanum Wheeled Omni-directional Vehicles
Viboonchaicheep, P., Shimada, A. & Kosaka, Y., 2003 Dec 1, p. 854-859. 6 p.Research output: Contribution to conference › Paper › peer-review
58 Citations (Scopus) -
Power integrity behavior for various packaging environments
Terasaki, M., Kiyosige, S., Ichimura, W., Kobayashi, R., Kubo, G., Otsuka, H. & Sudo, T., 2013 Jan 1.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Practical path and motion planner for a tractor-trailer robot
Viale, M., Tsubochi, T. & Yuta, S., 1997 Dec 1, p. 989-996. 8 p.Research output: Contribution to conference › Paper › peer-review
11 Citations (Scopus) -
Preceding vehicle and road lanes recognition methods for RCAS using vision system
Ito, T. & Yamada, K., 1994, p. 85-90. 6 p.Research output: Contribution to conference › Paper › peer-review
10 Citations (Scopus) -
PRECISE MEASURING METHOD OF ELONGATION AND RESIDUAL STRAIN OF OPTICAL FIBER DUE TO CABLING PROCESSES.
Tanaka, S., Hoshikawa, M., Kurauchi, N., Katsuyama, Y. & Horiguchi, T., 1981, p. 6. 6. 1-6. 6. 4.Research output: Contribution to conference › Paper › peer-review
6 Citations (Scopus) -
Prediction of the meta-stability phase through analysis of driving behavior
Ito, T. & Kaneyasu, R., 2014.Research output: Contribution to conference › Paper › peer-review
-
Preparation and property of liquid crystalline slide-ring gels
Kidowaki, M., Nakajima, T., Araki, J., Kataoka, T., Ruslim, C., Zhao, C. & Ito, K., 2006 Dec 1, p. 3931-3932. 2 p.Research output: Contribution to conference › Paper › peer-review
-
Preparation and property of temperature responsive slide-ring gels
Kidowaki, M., Zhao, C., Kataoka, T., Nakajima, T., Nagao, Y. & Ito, K., 2005, p. 1778. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Preparation of corrosion resistant film on magnesium alloys with different aluminum contents by steam coating
Tsunakawa, M., Shimada, Y., Nakamura, K. & Ishizaki, T., 2017.Research output: Contribution to conference › Paper › peer-review
-
Preparation of liquid crystalline slide-ring gels
Kidowaki, M., Nakajima, T., Araki, J., Kataoka, T., Ruslim, C., Zhao, C. & Ito, K., 2006 Oct 19. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Preparation of slide-ring gels by photocrosslinking
Kidowaki, M., Ruslim, C., Zhao, C., Kataoka, T. & Ito, K., 2006 Oct 19. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Present and future directions for multichip module technologies
Sudo, T., 1994 Dec 1, p. 51-54. 4 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Prewar tenement houses as risk factors and cultural assets of the densely built-up areas in Osaka City
Nakamura, H., 2003 Sep 1.Research output: Contribution to conference › Paper
-
Processing speed improvement on SFM using panoramic images based on camera direction constraints
Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020.Research output: Contribution to conference › Paper › peer-review
-
Processing speed improvement on SFM using panoramic images based on camera direction constraints
Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020 Jan 1.Research output: Contribution to conference › Paper › peer-review
-
PROGRAMMING FOR A SYSTEM TO ASSIST IN THE CONTROL OF ROBOTS.
Chang, K. H., Funakubo, H., Dohi, T., Isomura, T. & Komeda, T., 1985 Dec 1, p. 767-774. 8 p.Research output: Contribution to conference › Paper › peer-review
-
Proposal of open-network-interface for industrial robots (ORiN) and its experimental evaluation
Mizukawa, M., Koyama, T., Inukai, T., Noda, A., Kanamaru, N., Noguchi, Y. & Otera, N., 2001 Jan 1, p. 689-694. 6 p.Research output: Contribution to conference › Paper › peer-review
10 Citations (Scopus) -
Propulsion control experiments in mass-control mode of an underwater travelling marine-express model vehicle ME02
Yoshida, K., Shi, L. & Takami, H., 1997, p. 631-636. 6 p.Research output: Contribution to conference › Paper › peer-review
4 Citations (Scopus) -
Prospects of gamma-ray observations and dark matter search with CALET
Yoshida, K., Kubota, A., Torii, S., Kasahara, K., Shimizu, Y., Tamura, T. & Chang, J., 2007 Jan 1, p. 817-820. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Proton and Helium spectra obtained by RUNJOB experiment
Hareyama, M., Derbina, V. A., Galkin, V. I., Hirakawa, Y., Horiuchi, Y., Ichimura, M., Inoue, N., Kamioka, E., Kobayashi, T., Kopenkin, V. V., Kuramata, S., Managadze, A. K., Matsutani, H., Misnikova, N. P., Mukhamedshin, R. A., Nagasawa, S., Nakano, R., Namiki, M., Nakazawa, M., Nanjo, H. & 23 others, , 2005, p. 17-20. 4 p.Research output: Contribution to conference › Paper › peer-review
6 Citations (Scopus) -
Pure dephasing induced by exciton-phonon interactions in GaAs quantum dots
Wang, H., Fan, X., Takagahara, T. & Cunningham, J. E., 1998 Jan 1, p. 162-163. 2 p.Research output: Contribution to conference › Paper › peer-review
-
QPSK carrier and bit-timing simultaneous recovery scheme for coherent demodulation
Nagura, T., Matsumoto, Y., Kubota, S. & Kato, S., 1995 Jan 1, p. 1636-1640. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Rapid and efficient extraction of inert platinum group metals from HNO3(aq) at elevated temperature
Zheng, Z., Arai, T. & Takao, K., 2020 Jan 1, p. 999-1001. 3 p.Research output: Contribution to conference › Paper › peer-review
-
Rapid mass production of gold nanoaprticle from gold salts
Yonezawa, T., Oda, M., Ishizaki, T., Saito, N. & Takai, O., 2006 Dec 1, p. 3843-3844. 2 p.Research output: Contribution to conference › Paper › peer-review
-
Readable contrast mining method for heterogeneous bipartite networks with class label
Nishiguchi, M., Shirai, Y., Morita, H. & Goto, Y., 2020.Research output: Contribution to conference › Paper › peer-review
-
Readable contrast mining method for heterogeneous bipartite networks with class label
Nishiguchi, M., Shirai, Y., Morita, H. & Goto, Y., 2020.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Real-time mapping of construction workers using multilayered LiDAr
Nakagawa, M., Kaseda, M. & Taguchi, M., 2020.Research output: Contribution to conference › Paper › peer-review
-
Real-time mapping of construction workers using multilayered LiDAr
Nakagawa, M., Kaseda, M. & Taguchi, M., 2020 Jan 1.Research output: Contribution to conference › Paper › peer-review
-
Real-time Network System by Responsive Processor and Its Application to Bilateral Robot Control
Uchimura, Y., Yakoh, T., Yamasaki, N. & Ohnishi, K., 2003 Dec 1, p. 1209-1214. 6 p.Research output: Contribution to conference › Paper › peer-review
4 Citations (Scopus) -
Recognition of 3D free-form objects using segment-based stereo vision
Sumi, Y., Kawai, Y., Yoshimi, T. & Tomita, F., 1998 Dec 1, p. 668-674. 7 p.Research output: Contribution to conference › Paper › peer-review
13 Citations (Scopus) -
Reconfigurable topology scheme for a wireless ad-hoc community network
Kawai, M., Gyoda, K. & Nozaki, M., 1999 Jan 1, p. 17-22. 6 p.Research output: Contribution to conference › Paper › peer-review
-
Reducing signal transmission loss by low surface roughness
Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 Jan 1.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Reliability of damascene copper interconnects
Ueno, K., Ishigarni, T., Kakuhara, Y. & Kawano, M., 2005, p. 408-418. 11 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Reliable and low power consumption personal terminal architecture for wireless multimedia communications
Kawazoe, K., Sugimura, Y., Kubota, S. & Kato, S., 1995 Dec 1, p. 1362-1366. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Reliable channel control method for wireless multimedia communications
Sugimura, Y., Kawazoe, K. & Kubota, S., 1995 Dec 1, p. 476-480. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Remote collaboration through time delay in multiple teleoperation
Ohba, K., Kawabata, S., Chong, N. Y., Komoriya, K., Matsumaru, T., Matsuhira, N., Takase, K. & Tanie, K., 1999, p. 1866-1871. 6 p.Research output: Contribution to conference › Paper › peer-review
27 Citations (Scopus) -
Remote viewing on the Web using multiple mobile robotic avatars
Maeyama, S., Yuta, S. & Harada, A., 2001 Dec 1, p. 637-642. 6 p.Research output: Contribution to conference › Paper › peer-review
11 Citations (Scopus) -
Representation of Ethnic Identity Thorough Spatial Conservation of the House and the Dwelling in Northern Thailand
Shimizu, I., Tansukanun, P. & Sooksawasdi, S., 2017 Jul 16, p. 1-24.Research output: Contribution to conference › Paper › peer-review
-
Research on improving work efficiency of unmanned construction
Moteki, M., Akihiko, N., Yuta, S., Mishima, H. & Fujino, K., 2016, p. 478-486. 9 p.Research output: Contribution to conference › Paper › peer-review
Open Access8 Citations (Scopus) -
Research on robot cooperation system using arm robot and mobile robot in Kukanchi
Kato, T., Mizuno, T., Hanji, T., Mizukawa, M., Ando, Y. & Yoshimi, T., 2010 Dec 1, p. 361-366. 6 p.Research output: Contribution to conference › Paper › peer-review
-
Resonance frequency of carriages for linear roller guides
Sakai, Y. & Tsutsumi, M., 2011 Dec 1.Research output: Contribution to conference › Paper › peer-review