Find Research outputs

Search results

• A Study on a New Rotary Frequency Converter for Wind Farm Power System

  Komatsu, T., Fujimitsu, M., Koyanagi, K., Funabashi, T., Fujita, G., Furukawa, R. & Yokoyama, R., 2001 Jul 1, In: The International Conference on Electrical Engineering 2001 (ICEE2001).

  Research output: Contribution to journal › Article › peer-review

• A study on Adsorption onto TODGA Resin after Electrolytic Reduction in ERIX Process for Reprocessing Spent FBR-MOX Fuel

  H.Hoshi, H. H., T.Arai, T. A., Y.Z.Wei, Y. Z. W., M.Kumagai, M. K., T.Asakura, T. A., Y.Morita, Y. M. & Arai, T., 2005 Feb 1, In: Proceedings of NUCEF 2005.

  Research output: Contribution to journal › Article › peer-review

• A Study on Adaptive Algorithm for Multi-Channel Echo Canceller

  Chen, G., Muto, K., Asai, K., Sugimoto, Y., Yuki, K., Shimada, K. & Sone, T., 2002 Jul 1, In: Proc of ICSV. 678, p. 1-8

  Research output: Contribution to journal › Article › peer-review

• A study on actual livability of annex-added housing

  Minami, K., Takenoshita, Y. & Furuya, Y., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 233-236 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on actual conditions of closed elementary and junior high school facilities in the 23 wards in Tokyo and the planning process for reusing and utilizing these facilities

  Ueda, Y., Akazawa, S. & Minami, K., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 273-277 5 p.

  Research output: Contribution to journal › Article › peer-review

• A Study of Wearable Loop Antenna for One Segment Broadcasting Reception

  Suzuki, T., Iwasaki, H., Yamamoto, S., Hankui, E., Taura, T., Harada, T. & Akio, A., 2009 Oct 22, In: ISAP 2009. p. 409-412

  Research output: Contribution to journal › Article › peer-review

• A Study of Wall-Climbing Robot for Cleaning Silo Using Vacuum Principle

  Nguyen, V. T., Nguyen, N. K., Nguyen, C. C. & Bui, N. T., 2021 Jul, In: International Journal of Mechanical Engineering and Robotics Research. 10, 7, p. 368-373 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study of university students' attitudes toward CD-ROM English materials

  Yamazaki, A. K. & Shimizu, M., 1997 Sep 13, In: Proceedings of The Fifth Joint Conference on Educational Technology, Tokyo, Sept. 1997. p. 409-410

  Research output: Contribution to journal › Article › peer-review

• A study of towel folding by a robot arm - Spreading and vertex detection using image processing

  Oshima, T., Yoshimi, T., Mizukawa, M. & Ando, Y., 2014 Dec 16, International Conference on Control, Automation and Systems. IEEE Computer Society, p. 627-631 5 p. 6987856. (International Conference on Control, Automation and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A Study of Throughput Prediction using Convolutional Neural Network over Factory Environment

  Hou, Y., Yano, K., Suga, N., Webber, J., Nii, E., Higashimori, T., Denno, S. & Suzuki, Y., 2022, 24th International Conference on Advanced Communication Technology: Artificial Intelligence Technologies toward Cybersecurity!!, ICACT 2022 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 429-434 6 p. (International Conference on Advanced Communication Technology, ICACT; vol. 2022-February).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A Study of Throughput Prediction using Convolutional Neural Network over Factory Environment

  Hou, Y., Yano, K., Suga, N., Webber, J., Nii, E., Higashimori, T., Denno, S. & Suzuki, Y., 2021 Feb 7, 23rd International Conference on Advanced Communication Technology: On-Line Security in Pandemic Era!, ICACT 2021 - Proceeding. Institute of Electrical and Electronics Engineers Inc., p. 429-434 6 p. 9370905. (International Conference on Advanced Communication Technology, ICACT; vol. 2021-February).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study of the working efficiency of a remote control type hydraulic excavator

  Hashimoto, T., Fujino, K. & Yuta, S., 2017, 19th International and 14th European-African Regional Conference of the ISTVS. Kiss, P. & Mathe, L. (eds.). International Society for Terrain Vehicle Systems, (19th International and 14th European-African Regional Conference of the ISTVS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study of the use of the space from the viewpoint of gender relationship: Study of Spatial Characteristics in Lowland Society of Northern Thailand, Part 2.

  Shimizu, I., 2015, In: Summaries of technical papers of annual meeting of Architectural Planning and Design. Architectural Institute of Japan.. p. 1199-1200

  Research output: Contribution to journal › Article

• A Study of the Urban Tissue Design for Reorganizing Urban Environments -A Case Study of the Shimbashi Areas of Tokyo

  MINAMI, K., 2007 Nov 7, In: Proceedings of Building Stock Activation 2007. p. 321-326

  Research output: Contribution to journal › Article › peer-review

• A Study of the Switched Reluctance Motor using Grain-Oriented Electrical Steel Sheets

  Tsuchiya, Y. & Akatsu, K., 2020 Oct 11, ECCE 2020 - IEEE Energy Conversion Congress and Exposition. Institute of Electrical and Electronics Engineers Inc., p. 3623-3628 6 p. 9235666. (ECCE 2020 - IEEE Energy Conversion Congress and Exposition).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• A Study of the Relationship between TOEIC Scores and Functional Job Performance: Self-assessment of Foreign Language Proficiency

  Ito, T., Kawaguchi, K. & Ohta, R., 2005 Sep 1, In: TOEIC Research Report. p. 1-40

  Research output: Contribution to journal › Article › peer-review

• A study of the position of the reference microphone of active noise control of feedforward type for MRI noise

  Muto, K., Nakayama, S., Osada, R., Yagi, K. & Chen, G., 2014 Jan 1, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Davy, J., Burgess, M., Don, C., Dowsett, L., McMinn, T. & Broner, N. (eds.). Australian Acoustical Society, (INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study of the fabrication of cylindrical implants using hydroxyapatites

  Chae, S. W. & Ryu, S. C., 2012, In: Journal of Ceramic Processing Research. 13, 2, p. 117-122 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study of the effect of KClO₃ addition on the AC susceptibility and micro structure of high-temperature (T_c^onset at 105 K) YBCO ceramic superconductors

  Veneva, A., Iordanov, I., Toshev, L., Stoyanova-Ivanova, A. & Gogova, D., 1998 Nov 20, In: Physica C: Superconductivity and its applications. 308, 3-4, p. 175-184 10 p.

  Research output: Contribution to journal › Article › peer-review
  29 Citations (Scopus)

• A study of the chain-folded lamellae structure and its array in the isotactic polypropylene spherulites by HAADF-STEM and HV-TEM tomography techniques

  Matsumoto, H., Song, M., Sano, H., Shimojo, M. & Furuya, K., 2008 Sep 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• A study of the Ce(III)/Ce(IV) redox couple for redox flow battery application

  Fang, B., Iwasa, S., Wei, Y., Arai, T. & Kumagai, M., 2002 Sep 12, In: Electrochimica Acta. 47, 24, p. 3971-3976 6 p.

  Research output: Contribution to journal › Article › peer-review
  135 Citations (Scopus)

• A Study of Steganography Based on Error Correction Code and Secret Sharing Scheme

  Onuma, K. & Miyata, S., 2020 Nov 25, 2020 3rd International Conference on Signal Processing and Information Security, ICSPIS 2020. Institute of Electrical and Electronics Engineers Inc., 9340154. (2020 3rd International Conference on Signal Processing and Information Security, ICSPIS 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study of specification language metrics

  Keiyu, A. & Yamazaki, A., 1991 Jun 2, In: Master Thesis, Department of Computer Science, University of Maryland, Baltimore County, Maryland.

  Research output: Contribution to journal › Article › peer-review

• A study of sound intensity measurement of MRI driving sound

  Muto, K., Hideo, S., Kazuo, Y., Kentaro, E., Kunihiko, T. & Chen, G., 2009 Dec 1, 38th International Congress and Exposition on Noise Control Engineering 2009, INTER-NOISE 2009. p. 4910-4916 7 p. (38th International Congress and Exposition on Noise Control Engineering 2009, INTER-NOISE 2009; vol. 7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study of self-loosening and fatigue failure of bolted joint under transverse vibration - Influences of property class of bolt and plastic region tightening -

  Hashimura, S., 2007, In: Key Engineering Materials. 353-358, PART 3, p. 2037-2040 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• A study of self-dithering for ΔΣ fractional-N PLL

  Kato, Y., Ioka, E. & Matsuya, Y., 2015 Jan, In: Electronics and Communications in Japan. 98, 1, p. 9-14 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study of self-dithering for ΔΣ fractional-N PLL

  Kato, Y., Ioka, E. & Matsuya, Y., 2013, In: IEEJ Transactions on Electronics, Information and Systems. 133, 2, p. 234-238 5 p.

  Research output: Contribution to journal › Article › peer-review

• A Study of Radio Zone Length of Dual-Polarized Omni-Directional Antennas Mounted on Rooftop for Personal Handy-Phone System

  Ando, A., Kondo, K. & Kubota, S., 2008 Jan 1, In: IEEE Transaction on Vehicle Technologies (VT). 57, p. 2-10

  Research output: Contribution to journal › Article › peer-review

  28 Citations (Scopus)

• A study of radio zone length of dual-polarized omnidirectional antennas mounted on rooftop for personal handy-phone system

  Ando, A., Kondo, A. & Kubota, S., 2008 Jan, In: IEEE Transactions on Vehicular Technology. 57, 1, p. 2-10 9 p.

  Research output: Contribution to journal › Article › peer-review
  28 Citations (Scopus)

• A Study of Radiation Characteristics in an Optically Controlled Array Antenna

  Konishi, Y., Chujo, W., Iwasaki, H. & Yasukawa, K., 1989 Aug 1, In: International Symposium Antenna and Propagation. 4B4-5, p. 965-968

  Research output: Contribution to journal › Article › peer-review

• A study of password authentication method against observing attacks

  Fujita, K. & Hirakawa, Y., 2008.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)

• A Study of Overheads in Network Mobility (NEMO) Basic Support Protocol

  Kafle, V. P., Kamioka, E. & Yamada, S., 2004 Sep 24, In: Proceedings of IEICE General Conference. BS-9-9, p. SE17-SE18

  Research output: Contribution to journal › Article › peer-review

• A study of motivation and learning in Malaysian manufacturing industry

  Mat, S., Case, K., Mohamaddan, S. & Goh, Y. M., 2017 Jan 1, In: Production and Manufacturing Research. 5, 1, p. 284-305 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• A study of meaning comprehensibility of pictograms for lathe procedural instructions

  Yamazaki, A. K., Yabutani, J., Ebisawa, Y. & Hori, S., 2007, Knowledge-Based Intelligent Information and Engineering Systems: KES 2007 - WIRN 2007 - 11th International Conference, KES 2007, XVII Italian Workshop on Neural Networks, Proceedings. PART 3 ed. Springer Verlag, p. 1058-1064 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4694 LNAI, no. PART 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study of making a database for the deteriorated concrete bridges using by the inspection software

  UOMOTO, T., Kato, Y. & IYODA, T., 2003 Jan 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• A study of making a database for the deteriorated concrete bridges

  IYODA, T., KATO, Y. & UOMOTO, T., 2003 Jan 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• A study of loosening and fatigue of bolted joints under transverse vibration

  Hashimura, S. & Socie, D. F., 2005 Jan 1, In: SAE Technical Papers.

  Research output: Contribution to journal › Conference article › peer-review
  9 Citations (Scopus)

• A study of loosening and fatigue failure of bolted joints under transverse vibration

  Hashimura, S. & Socie, D. F., 2006, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 4, p. 1297-1304 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)

• A study of locomotion mechanism based on gravitational environment

  Takahashi, K., Shimoda, S., Iizuka, K., Kubota, T. & Nakatani, I., 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). p. 4001-4006 6 p. (2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• A study of Japanese tea caddy lid opening by robot arm

  Hirayama, M., Yoshimi, T., Mizukawa, M. & Ando, Y., 2012 Jan 1, 2012 Proceedings of SICE Annual Conference, SICE 2012. Society of Instrument and Control Engineers (SICE), p. 2250-2255 6 p. 6318389. (Proceedings of the SICE Annual Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study of intelligent drawer with RFID tag information reading system for Intelligent Space

  Fujita, T., Numata, Y., Yoshimi, T., Mizukawa, M. & Ando, Y., 2012 Oct 23, 2012 IEEE International Conference on Mechatronics and Automation, ICMA 2012. p. 533-538 6 p. 6283164. (2012 IEEE International Conference on Mechatronics and Automation, ICMA 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study of high torque Surface-Mounted Permanent Magnet Synchronous Motor by maximum utilization of the magnet flux

  Miyamasu, M. & Akatsu, K., 2012 Dec 1, ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. 6401986. (ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study of high-speed joining method using spiral nails

  Morodomi, H., Nishihara, Y., Matsubara, S., Hashimura, S. & Hori, H., 2020 Nov, In: Journal of Manufacturing Processes. 59, p. 500-508 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• A study of high electrical power and high efficiency antenna in 13.56 MHz Wireless Power Transfer

  Watanabe, M. & Akatsu, K., 2020 Oct 11, ECCE 2020 - IEEE Energy Conversion Congress and Exposition. Institute of Electrical and Electronics Engineers Inc., p. 1027-1031 5 p. 9235829. (ECCE 2020 - IEEE Energy Conversion Congress and Exposition).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study of high-efficiency switched reluctance motor with single phase input operation

  Yoneoka, Y. & Akatsu, K., 2010 Dec 1, 2010 International Conference on Electrical Machines and Systems, ICEMS2010. p. 1681-1686 6 p. 5664370. (2010 International Conference on Electrical Machines and Systems, ICEMS2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study of grain orientation of Alkali doped polycrystalline YBCO ceramics using an EBSD technique

  Koblischka-Veneva, A., Mücklich, F. & Koblischka, M. R., 2002, In: Crystal Engineering. 5, 3-4 SPEC., p. 411-418 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• A study of foot structure for humanoid robot on rough terrain

  Nguyen, V. T. & Hasegawa, H., 2018, 17th International Conference on Modeling and Applied Simulation, MAS 2018. Longo, F., Bruzzone, A. G., De Felice, F., Massei, M., Longo, F., Solis, A., Frydman, C. & Massei, M. (eds.). Dime University of Genoa, p. 61-67 7 p. (17th International Conference on Modeling and Applied Simulation, MAS 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study of field condition feedback to a remote controlled underwater heavy machine operator

  Nozaki, Y., Yoshimi, T. & Fuchiyama, S., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• A study of eye contact for tabletop robot

  Nozaki, Y., Yoshimi, T. & Takeuchi, K., 2017 Dec 13, ICCAS 2017 - 2017 17th International Conference on Control, Automation and Systems - Proceedings. IEEE Computer Society, Vol. 2017-October. p. 1673-1675 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study of extended PSO algorithm for video image processing and its application to a mobile robot

  Kobayashi, T., Keita, N., Joe, I. & Guisheng, Z., 2009 Jul, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 75, 755, p. 2005-2012 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access