Search concepts
|
Selected filters
|
- 21,350 - 21,400 out of 22,870 results
Search results
-
Conference contribution
Spiral antennas radiating a circularly polarized conical beam
Hirose, K., Sato, H. & Nakano, H., 2005, 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. p. 602-605 4 p. 1552324. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); vol. 3 A).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
SPMSM design considerations for initial position and magnet polarity estimation using carrier signal injection
Akatsu, K., Harke, M. C. & Lorenz, R. D., 2007 Dec 1, Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS. p. 2393-2398 6 p. 4348110. (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
6 Citations (Scopus) -
SRSC: SDN-based routing scheme for CCN
Aubry, E., Silverston, T. & Chrisment, I., 2015 Jun 1, 1st IEEE Conference on Network Softwarization: Software-Defined Infrastructures for Networks, Clouds, IoT and Services, NETSOFT 2015. Institute of Electrical and Electronics Engineers Inc., 7116130. (1st IEEE Conference on Network Softwarization: Software-Defined Infrastructures for Networks, Clouds, IoT and Services, NETSOFT 2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
34 Citations (Scopus) -
SSEST: Summer School on Embedded System Technologies
Matsubara, Y., Sugaya, M., Taniguchi, I., Murakami, Y., Kanai, H. & Takada, H., 2007, The 13th International Conference on Parallel and Distributed Systems, ICPADS. 4447785. (Proceedings of the International Conference on Parallel and Distributed Systems - ICPADS; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
SSMA signal transmission over QPSK modulated signal
Morikura, M., Enomoto, K., Kubota, S. & Kato, S., 1990 Dec 1, GLOBECOM '90. Publ by IEEE, p. 751-755 5 p. (IEEE Global Telecommunications Conference and Exhibition; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Stability analysis and design for switched descriptor systems
Zhai, G., Kou, R., Imae, J. & Kobayashi, T., 2006, Proceedings of the 2006 IEEE International Symposium on Intelligent Control, ISIC. p. 482-487 6 p. 4064924. (IEEE International Symposium on Intelligent Control - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
16 Citations (Scopus) -
Stability analysis for switched systems with continuous-time and discrete-time subsystems
Zhai, G., Lin, H., Michel, A. N. & Yasuda, K., 2004, Proceedings of the 2004 American Control Conference (AAC). p. 4555-4560 6 p. (Proceedings of the American Control Conference; vol. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
44 Citations (Scopus) -
Stability Analysis of Self-Folding Sheets on Water Surface
Yamada, M., Shigemune, H. & Sawada, H., 2019 Dec 1, MHS 2019 - 30th 2019 International Symposium on Micro-NanoMechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., 9249253. (MHS 2019 - 30th 2019 International Symposium on Micro-NanoMechatronics and Human Science).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stability and H∞ performance preserving scheduling policy for networked control systems
Lin, H., Zhai, G., Fang, L. & Antsaklis, P. J., 2005, Proceedings of the 16th IFAC World Congress, IFAC 2005. IFAC Secretariat, p. 218-223 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 16).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
25 Citations (Scopus) -
Stability of digital control systems with time delays
Michel, A. N., Sun, Y. & Zhai, G., 2006, Proceedings of the 2006 IEEE International Symposium on Intelligent Control, ISIC. p. 498-503 6 p. 4064927. (IEEE International Symposium on Intelligent Control - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stability of switched linear discrete-time descriptor systems: A commutation condition
Zhai, G., Xu, X. & Ho, D. W. C., 2011 Sep 29, Proceedings of the 2011 American Control Conference, ACC 2011. p. 2613-2618 6 p. 5991075. (Proceedings of the American Control Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Stabilizability and practical stabilizability of continuous-time switched systems: A unified view
Xu, P., Zhai, G. & He, S., 2007, Proceedings of the 2007 American Control Conference, ACC. p. 663-668 6 p. 4282211. (Proceedings of the American Control Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
24 Citations (Scopus) -
Stabilization of switched linear uncertain stochastic systems
Chang, Y., Zhai, G., Fu, B. & Xiong, L., 2019 Jul, Proceedings of the 38th Chinese Control Conference, CCC 2019. Fu, M. & Sun, J. (eds.). IEEE Computer Society, p. 1784-1788 5 p. 8865321. (Chinese Control Conference, CCC; vol. 2019-July).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Stabilization of systems with time-varying delay based on complete quadratic Lyapunov-Krasovskii functional
Minagawa, D. & Uchimura, Y., 2014 Jan 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 110-115 6 p. 6823265. (International Workshop on Advanced Motion Control, AMC).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stabilizing controller design of system with time-varying delay based on the complete quadratic Lyapunov-Krasovskii functional
Uchimura, Y. & Minagawa, D., 2014 Feb 24, Proceedings, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 4806-4811 6 p. 7049228Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stable multi-membrane module prepared by counter diffusion CVD for high temperature hydrogen separation
Aida, H., Nomura, M., Nakao, S. I., Gopalakrishnan, S. & Sugawara, T., 2005 Jul 29, 2005 AIChE Spring National Meeting, Conference Proceedings. 1 p. (2005 AIChE Spring National Meeting, Conference Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Standing-up control of a fallen humanoid robot based on the ground-contacting state of the body
Araki, K., Miwa, T., Shigemune, H., Hashimoto, S. & Sawada, H., 2018 Dec 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 3292-3297 6 p. 8591360. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Star shaped molecularly imprinted polymer working as a drug carrier
Nakayama, T., Yamagishi, T., Sekine, S. I. & Yoshimi, Y., 2006 Dec 1, 2006 AIChE Annual Meeting. (AIChE Annual Meeting, Conference Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Statistical uncertainty on assessment of spatial liquefaction resistance
Namikawa, T., 2019, Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions- Proceedings of the 7th International Conference on Earthquake Geotechnical Engineering, 2019. Silvestri, F. & Moraci, N. (eds.). CRC Press/Balkema, p. 4095-4102 8 p. (Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions- Proceedings of the 7th International Conference on Earthquake Geotechnical Engineering, 2019).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stator iron loss measurement method in permanent magnet synchronous motor to remove the mechanical loss effect
Sakaue, T. & Akatsu, K., 2014 Jan 1, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014. Institute of Electrical and Electronics Engineers Inc., p. 3131-3135 5 p. 7014032. (2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
5 Citations (Scopus) -
Status of R&Ds for undulators with bulk High temperature superconductors
Tanaka, T., Tsuru, R., Seike, T., Hirano, H., Morita, M., Teshima, H., Nariki, S., Sakai, N., Hirabayashi, I., Murakami, M. & Kitamura, H., 2007 Mar 26, SYNCHROTRON RADIATION INSTRUMENTATION: Ninth International Conference on Synchrotron Radiation Instrumentation. p. 297-300 4 p. (AIP Conference Proceedings; vol. 879).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Status of X-Ray imaging and spectroscopy mission (XRISM)
XRISM Development team, 2020, Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray. den Herder, J-W. A., Nikzad, S. & Nakazawa, K. (eds.). SPIE, 1144422. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11444).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
15 Citations (Scopus) -
S-TBL assessment for new concrete materials
Kato, Y. & Henry, M., 2010, Concrete under Severe Conditions: Environment and Loading - Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC'10. p. 1439-1446 8 p. (Concrete under Severe Conditions: Environment and Loading - Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC'10; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stepper Motor Wire Breaks Diagnose and Redundant Control System for Factory Automation
Perera, K. L. A. N., Premachandra, C. & Senadeera, P. M., 2020 Mar 6, Proceedings of International Conference on Image Processing and Robotics, ICIPRoB 2020. Sudantha, B. H. (ed.). Institute of Electrical and Electronics Engineers Inc., 9367363. (Proceedings of International Conference on Image Processing and Robotics, ICIPRoB 2020).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stepwise sleep depth control for run-time leakage power saving
Takeda, S., Miwa, S., Usami, K. & Nakamura, H., 2012 May 22, GLSVLSI'12 - Proceedings of the Great Lakes Symposium on VLSI 2012. p. 233-238 6 p. (Proceedings of the ACM Great Lakes Symposium on VLSI, GLSVLSI).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Stereo measurement without markers for moving soil surfaces
Nakanishi, A., Nakagawa, M. & Okamoto, T., 2011 Dec 1, 32nd Asian Conference on Remote Sensing 2011, ACRS 2011. p. 382-385 4 p. (32nd Asian Conference on Remote Sensing 2011, ACRS 2011; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stereo vision based motion identification
Chen, X., 2007, Advanced Intelligent Computing Theories and Applications: With Aspects of Theoretical and Methodological Issues - Third International Conference on Intelligent Computing, ICIC 2007, Proceedings. Springer Verlag, p. 575-586 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4681 LNCS).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Stereo vision based motion parameter estimation
Chen, X., 2009, Emerging Intelligent Computing Technology and Applications: With Aspects of Artificial Intelligence - 5th International Conference on Intelligent Computing, ICIC 2009, Proceedings. p. 371-380 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5755 LNAI).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Stimulated Raman gain spectroscopy of solutions by nanosecond pulsed and cw probe IR laser
Tanabe, T., Suto, K., Kozawa, Y., Nishizawa, J. & Oyama, Y., 2004, Conference Digest of the 2004 Joint 29th International Conference on Infrared and Millimeter Waves and 12th International Conference on Terahertz Electronics. Thumm, M. & Wiesbeck, W. (eds.). p. 423-424 2 p. (Conference Digest of the 2004 Joint 29th International Conference on Infrared and Millimeter Waves and 12th International Conference on Terahertz Electronics).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Strategy acquisition of agents in multi-issue negotiation
Yoshikawa, S., Kamiryo, T., Yasumura, Y. & Uehara, K., 2006 Jan 1, Proceedings - 2006 IEEE/WIC/ACM International Conference on Web Intelligence (WI 2006 Main Conference Proceedings), WI'06. Institute of Electrical and Electronics Engineers Inc., p. 933-939 7 p. 4061498. (Proceedings - 2006 IEEE/WIC/ACM International Conference on Web Intelligence (WI 2006 Main Conference Proceedings), WI'06).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
5 Citations (Scopus) -
Strategy acquisition on multi-issue negotiation without estimating opponent's preference
Yoshikawa, S., Yasumura, Y. & Uehara, K., 2008, Agent and Multi-Agent Systems: Technologies and Applications - Second KES International Symposium, KES-AMSTA 2008, Proceedings. p. 371-380 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4953 LNAI).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Streamlined vessels for speedboats: Macro modifications of shark skin design applications
Ibrahim, M. D., Amran, S. N. A., Zulkharnain, A. & Sunami, Y., 2018 Jan 22, The Irago Conference 2017: A 360-Degree Outlook on Critical Scientific and Technological Challenges for a Sustainable Society. Sandhu, A. & Sharma, J. (eds.). American Institute of Physics Inc., 020023. (AIP Conference Proceedings; vol. 1929).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Strength estimation of CHS column to H-beam connections stiffened by exterior diaphragms
Okamoto, M., Tanaka, T. & Asada, H., 2018, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017. Heidarpour, A. & Zhao, X-L. (eds.). CRC Press/Balkema, p. 271-278 8 p. (Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Strip-loaded waveguide optical isolator employing nonreciprocal guided-radiation mode conversion
Yokoi, H. & Takaki, K., 2012, Integrated Optoelectronics 6. 33 ed. Electrochemical Society Inc., p. 61-66 6 p. (ECS Transactions; vol. 45, no. 33).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Strong coupled fluid-structure interaction simulation of cerebrovascular system using multi-scale model
Katagiri, K., Krdey, A., Yamamoto, S. & Oshima, M., 2012 Dec 1, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 835-836 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Structural analysis of keropok keping drying machine
Mohamad Suffian, M. S. Z., Leman, M. N., Mohamaddan, S. & Abang Mohamad Mohtar, A. M. A., 2017, Modeling, Design and Simulation of Systems - 17th Asia Simulation Conference, AsiaSim 2017, Proceedings. Mohamed Ali, M. S., Wahid, H., Mohd Subha, N. A., Sahlan, S., Md. Yunus, M. A. & Wahap, A. R. (eds.). Springer Verlag, p. 12-25 14 p. (Communications in Computer and Information Science; vol. 752).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Structural analysis of multifunctional ionic gels
Ahmed, K., Naga, N. & Furukawa, H., 2018, ECS Transactions. Khosla, A., Furukawa, H., Fukushima, K., Ito, K., Kakugo, A., Tokito, S., Chu, T-Y., Matsui, H., Dos Santos, F. D., Shiba, T., Ito, H., Nakai, A., Saito, T., Milano, G., Masubuchi, Y., Yoshida, T., White, M., Yanagida, M., Kaltenbrunner, M., Masuhara, A., Bhansali, S., Nagahara, L. & Sekhar, P. (eds.). 1 ed. Electrochemical Society Inc., p. 427-436 10 p. (ECS Transactions; vol. 88, no. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Structural characteristics of Mg-Ni alloy films prepared by ion beam sputtering
Mitsuo, A. & Aizawa, T., 2001 Dec 1, Processing and Fabrication of Advanced Materials X. Srivatsan, T. S., Varin, R. A., Srivatsan, T. S. & Varin, R. A. (eds.). p. 121-127 7 p. (Processing and Fabrication of Advanced Materials X).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Structural health monitoring based on laser excitation vibration test and wavelet transform
Cao, S., Kajiwara, I., Li, X. & Hosoya, N., 2018 Feb 27, 2017 11th International Conference on Sensing Technology, ICST 2017. IEEE Computer Society, p. 1-6 6 p. 8304432. (Proceedings of the International Conference on Sensing Technology, ICST; vol. 2017-December).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Structural health monitoring by high-frequency vibration measurement with non-contact laser excitation
Kajiwara, I., Miyamoto, D., Hosoya, N. & Nishidome, C., 2011 May 24, Health Monitoring of Structural and Biological Systems 2011. 79841K. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7984).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding
Aizawa, T., Fukuda, T. & Morita, H., 2015 Aug 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 08002. (MATEC Web of Conferences; vol. 21).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Structure of current collector and flow characteristics of sodium vapor for the alkali metal thermoelectric converter
Tanaka, K., Negishi, A. & Masuda, T., 1992, Conversion Technologies - Electrochemical Conversions. Publ by IEEE, p. 3.13-3.18 (Proceedings of the Intersociety Energy Conversion Engineering Conference; vol. 3).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Structures of cornets in a homoepitaxially grown 4H-SiC film studied by DUV micro-Raman spectroscopy
Tomita, T., Matsuo, S., Okada, T., Kimoto, T., Mitani, T. & Nakashima, S. I., 2006 Dec 1, Silicon Carbide and Related Materials 2005, - Proceedings of the International Conference on Silicon Carbide and Related Materials 2005. PART 1 ed. p. 339-342 4 p. (Materials Science Forum; vol. 527-529, no. PART 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Studies to decrease cogging force and pulsating thrust in the prototype linear permanent magnet vernier motor
Shimomura, S., Fujieda, M. & Hoshino, K., 2008 Dec 1, Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008. p. 3417-3422 6 p. 4771357. (Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
14 Citations (Scopus) -
Studying the effect of lecture content on students’ EEG data in classroom using SVD
Babiker, A., Faye, I., Malik, A. S. & Sato, H., 2019 Jan 24, 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 200-204 5 p. 8626664. (2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018 - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Study of a computer system for evaluation of bearing wall stresses in structural planning reasoning by neural network
Tsutsumi, K., Tani, A., Kawamura, H., Matsubayashi, T., Katoaka, H., Komono, K. & Fukusima, Y., 1993 Jan 1, Computing in Civil and Building Engineering. Publ by ASCE, p. 817-824 8 p. (Computing in Civil and Building Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study of anisotropic black branes in asymptotically anti-de Sitter
Maeda, K., 2015, On Recent Developments in Theoretical and Experimental General Relativity, Astrophysics and Relativistic Field Theories. Rosquist, K., Jantzen, R. T., Ruffini, R. & Ruffini, R. (eds.). 210699 ed. World Scientific, p. 1419-1421 3 p. (The 13th Marcel Grossmann Meeting: On Recent Developments in Theoretical and Experimental General Relativity, Astrophysics and Relativistic Field Theories - Proceedings of the MG13 Meeting on General Relativity, 2012; no. 210699).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study of carbonation mechanism of blast-furnace slag cement with different carbon dioxide concentrations
Iyoda, T., Toyomura, E., Goto, S. & Asaga, K., 2015 Jan 1, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. Furuta, H., Frangopol, D. M. & Akiyama, M. (eds.). CRC Press/Balkema, p. 1686-1693 8 p. (Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study of desktop type external shoulder prosthesis control with bilateral servo system
Higashihara, T., Ohnishi, K., Komeda, T., Saito, Y. & Ohshima, T., 2012 Dec 1, 2012 9th France-Japan and 7th Europe-Asia Congress on Mechatronics, MECATRONICS 2012 / 13th International Workshop on Research and Education in Mechatronics, REM 2012. p. 225-230 6 p. 6451013. (2012 9th France-Japan and 7th Europe-Asia Congress on Mechatronics, MECATRONICS 2012 / 13th International Workshop on Research and Education in Mechatronics, REM 2012).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study of elastic moduli of sintered low alloy steels by acoustic pulse method
Hirose, N., Oouchi, K., Fujiki, A. & Asami, J., 2007, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. Trans Tech Publications Ltd, p. 749-752 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution