Find Research Outputs

2018

Effect of Driver Posture on Driving Characteristics when Control is Passed from an Autonomous Driving System to a Human Driver

Suzuki, K., Gokan, M., Oikawa, S., Matsui, Y. & Hirose, T. 2018 Jan 1 In : SAE Technical Papers. 2018-April

Research output: Contribution to journalConference article

Braking
Seats
Trucks
Automation
Acoustics

Effect of sintering temperature of Ce3+-doped Lu3Al5O12 phosphors on light emission and properties of crystal structure for white-light-emitting diodes

Koizumi, H., Watabe, J., Sugiyama, S., Hirabayashi, H. & Homma, T. 2018 Jun 1 In : Optical Review. 25, 3, p. 340-348 9 p.

Research output: Contribution to journalArticle

phosphors
light emission
sintering
light emitting diodes
crystal structure

Effect of sintering temperature on fatigue crack propagation rate of sintered Ag nanoparticles

Kimura, R., Kariya, Y., Mizumura, N. & Sasaki, K. 2018 Jan 1 In : Materials Transactions. 59, 4, p. 612-619 8 p.

Research output: Contribution to journalArticle

crack propagation
Fatigue crack propagation
sintering
Sintering
Nanoparticles
District heating
Flow control
Washing
Rivers
Water

Electrocaloric Refrigeration using Multi-Layers of Electrocaloric Material Films and Thermal Switches

Hirasawa, S., Kawanami, T. & Shirai, K. 2018 Jul 21 In : Heat Transfer Engineering. 39, 12, p. 1091-1099 9 p.

Research output: Contribution to journalArticle

heat storage
Heat storage
cooling systems
Refrigeration
Cooling systems

Encountered-type visual haptic display using MR fluid

Ohnari, H., Abiko, S. & Tsujita, T. 2018 Haptic Interaction - Science, Engineering and Design. Springer Verlag, Vol. 432, p. 151-155 5 p. (Lecture Notes in Electrical Engineering; vol. 432)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Display devices
Fluids
Containers
Haptic interfaces
Computer graphics

Enhanced ant colony system for reducing packet loss in wireless sensor network

Nasir, H. J. A., Ku-Mahamud, K. R. & Kamioka, E. 2018 Jan 1 In : International Journal of Grid and Distributed Computing. 11, 1, p. 81-88 8 p.

Research output: Contribution to journalArticle

Packet loss
Wireless sensor networks
Sensor nodes
Ant colony optimization
Energy efficiency

Enhanced Critical Current Density in Bulk MgB2

Muralidhar, M., Higuchi, M., Kitamoto, K., Koblischka, M. R., Jirsa, M. & Murakami, M. 2018 Jun 1 In : IEEE Transactions on Applied Superconductivity. 28, 4, 8000405

Research output: Contribution to journalArticle

Magnesium compounds
magnesium compounds
Flux pinning
Coated materials
Atmospheric temperature

Estimation system of construction equipment from field image by combination learning of its parts

Fujitake, M. & Yoshimi, T. 2018 Feb 7 2017 Asian Control Conference, ASCC 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January, p. 1672-1676 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Construction equipment
Object recognition
Video cameras
Automation
Cameras

Evaluation of immersive feeling in VR system with HMD by FNIRS measurement

Miyamoto, K., Koinuma, Y., Kanoh, S. & Ohkura, M. 2018 Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2017 International Conference on Affective and Pleasurable Design, 2017. Springer Verlag, Vol. 585, p. 285-291 7 p. (Advances in Intelligent Systems and Computing; vol. 585)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Display devices
Industry

Evaluation of Invasiveness by Breakdown Phenomena of Electrically Induced Bubbles for a Needle-Free Injector

Ichikawa, K., Maeda, S. & Yamanishi, Y. 2018 Apr 1 In : Journal of Microelectromechanical Systems. 27, 2, p. 305-311 7 p.

Research output: Contribution to journalArticle

Plasma (human)
Electron tubes
Mechanical engineering
Electric breakdown
Cavitation

Evaluation of “feelings of excitement” caused by a VR interactive system with unknown experience using ECG

Ito, K., Usuda, S., Yasunaga, K. & Ohkura, M. 2018 Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2017 International Conference on Affective and Pleasurable Design, 2017. Springer Verlag, Vol. 585, p. 292-302 11 p. (Advances in Intelligent Systems and Computing; vol. 585)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocardiography
Virtual reality
Ice
Fires
Display devices

Exact mean packet delay for delayed report messages multipoint control protocol in EPON

Miyata, S., Baba, K. I. & Yamaoka, K. 2018 Mar 1 In : Journal of Optical Communications and Networking. 10, 3, p. 209-219 11 p.

Research output: Contribution to journalArticle

Passive optical networks
Ethernet
Network protocols

Fabrication of aluminum foam core sandwich using sandwich-type foamable precursor with two face sheets by friction stir welding route

Utsunomiya, T., Otsuki, K. & Hangai, Y. 2018 Jan 1 In : Materials Transactions. 59, 6, p. 999-1004 6 p.

Research output: Contribution to journalArticle

friction stir welding
Friction stir welding
foams
Foams
routes

Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion

Hangai, Y., Otazawa, S., Utsunomiya, T., Suzuki, R., Koyama, S., Matsubara, M. & Yoshikawa, N. 2018 Jun 1 In : Materials Today Communications. 15, p. 36-42 7 p.

Research output: Contribution to journalArticle

Friction welding
Extrusion
Foams
Friction
Aluminum

Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing

Aizawa, T., Tamagaki, H. & Wasa, K. 2018 Jun 1 In : Journal of Micro and Nano-Manufacturing. 6, 2, 021007

Research output: Contribution to journalArticle

Nitrobenzene
Printing
Diamonds
Nozzles
Computer aided design
1 Citations

Fabrications and applications of low cost ceramic membrane from kaolin: A comprehensive review

Hubadillah, S. K., Othman, M. H. D., Matsuura, T., Ismail, A. F., Rahman, M. A., Harun, Z., Jaafar, J. & Nomura, M. 2018 Apr 1 In : Ceramics International. 44, 5, p. 4538-4560 23 p.

Research output: Contribution to journalReview article

Sintered alumina
Ceramic membranes
Kaolin
Mechanical stability
Chemical stability

Flower-like BiVO4 microspheres and their visible light-driven photocatalytic activity

Zulkifili, A. N., Fujiki, A. & Kimijima, S. 2018 Jan 31 In : Applied Sciences (Switzerland). 8, 2, 216

Research output: Contribution to journalArticle

Photocatalysis
Photocatalysts
Microspheres
Irradiation
Ostwald ripening

Foaming of aluminum foam precursor during friction stir welding

Hangai, Y., Takada, K., Endo, R., Fujii, H., Aoki, Y. & Utsunomiya, T. 2018 Sep 1 In : Journal of Materials Processing Technology. 259, p. 109-115 7 p.

Research output: Contribution to journalArticle

Terahertz wave detectors
Friction stir welding
Foams
Aluminum
Xerogels

Formation of corrosion-resistance films on Al-Zn-Mg alloy by steam coating using acidic Zn(NO3)2 aqueous solutions

Yokomizo, T., Shimada, Y., Tsunakawa, M., Serizawa, A. & Ishizaki, T. 2018 Jan 1 In : Keikinzoku/Journal of Japan Institute of Light Metals. 68, 4, p. 194-200 7 p.

Research output: Contribution to journalArticle

Strontium titanates
Corrosion resistance
Steam
Coatings
Corrosion

Green tea extract and black tea extract differentially influence cecal levels of short-chain fatty acids in rats

Unno, T. & Osakabe, N. 2018 Jan 1 (Accepted/In press) In : Food Science and Nutrition.

Research output: Contribution to journalArticle

black tea
short chain fatty acids
green tea
intestinal microorganisms
rats
Reheat cycle
Zirconium metallography
Thrust reversal
Delta wing aircraft
Heparin

How sonority appears in speech analyses

Nakajima, Y., Ueda, K., Remijn, G. B., Yamashita, Y. & Kishida, T. 2018 Jan 1 In : Acoustical Science and Technology. 39, 3, p. 179-181 3 p.

Research output: Contribution to journalReview article

Improvement of oxygen storage properties of hexagonal YMnO3+δ by microstructural modifications

Klimkowicz, A., Świerczek, K., Kobayashi, S., Takasaki, A., Allahyani, W. & Dabrowski, B. 2018 Feb 1 In : Journal of Solid State Chemistry. 258, p. 471-476 6 p.

Research output: Contribution to journalArticle

milling (machining)
Yttrium compounds
yttrium compounds
Mechanical alloying
thermogravimetry

Integrals for Finite Tensor Categories

Shimizu, K. 2018 Mar 13 (Accepted/In press) In : Algebras and Representation Theory. p. 1-35 35 p.

Research output: Contribution to journalArticle

Algebra
Tensors

Investigations of (Gd, Dy)BCO bulk superconductors fabricated via top-seeded infiltration growth process

Kumar Naik, S. P., Muralidhar, M., Nakanishi, Y. & Murakami, M. 2018 Jun 1 In : IEEE Transactions on Applied Superconductivity. 28, 4, 6801104

Research output: Contribution to journalArticle

Gadolinium compounds
Barium compounds
barium compounds
Conductive plastics
Copper compounds

Level-shifter free approach for multi-Vdd SOTB employing adaptive Vt modulation for pMOSFET

Usami, K., Kogure, S., Yoshida, Y., Magasaki, R. & Amano, H. 2018 Mar 7 2017 IEEE SOI-3D-Subthreshold Microelectronics Unified Conference, S3S 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-March, p. 1-3 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modulation
Electric potential
Silicon
Threshold voltage
Microprocessor chips

Low-cycle fatigue testing and thermal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Kariya, Y., Yajima, N., Obinata, K., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H. 2018 Mar 1 In : Microelectronics Reliability. 82, p. 20-27 8 p.

Research output: Contribution to journalArticle

thermal fatigue
Thermal fatigue
Fatigue testing
fatigue life
fatigue tests

Measurement of entanglement entropy in the two-dimensional Potts model using wavelet analysis

Tomita, Y. 2018 May 21 In : Physical Review E. 97, 5, 052128

Research output: Contribution to journalArticle

Potts model
Wavelet analysis
two dimensional models
wavelet analysis
Wavelet transforms

Medical application of decellularized tissue-polymer complex

Nakamura, N., Kimura, T. & Kishida, A. 2018 Mar 1 In : Kobunshi Ronbunshu. 75, 2, p. 128-136 9 p.

Research output: Contribution to journalArticle

Reheat cycle
Medical applications
polymer
Tissue
Photoionization

Modification and thermal properties of syndiotactic-1,2-polybutadiene

Naga, N., Ishinoda, S., Ishiguro, H., Ishikawa, G. & Noguchi, K. 2018 May 26 (Accepted/In press) In : Polymer Bulletin. p. 1-17 17 p.

Research output: Contribution to journalArticle

polybutadiene
Electric actuators
Polybutadienes
Program debugging
Thermodynamic properties

Moisture barrier properties of single-layer graphene deposited on Cu films for Cu metallization

Gomasang, P., Abe, T., Kawahara, K., Wasai, Y., Nabatova-Gabain, N., Cuong, N. T., Ago, H., Okada, S. & Ueno, K. 2018 Apr 1 In : Japanese Journal of Applied Physics. 57, 4, 04FC08

Research output: Contribution to journalArticle

Metallizing
moisture
Graphene
graphene
Moisture

Molecular fountain: A robustness enhancement framework for diffusive molecular communication

Egashira, H., Suzuki, J., Koike-Akino, T., Nakano, T., Fukuda, H. & Orlik, P. 2018 Jan 10 2017 IEEE Global Communications Conference, GLOBECOM 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January, p. 1-7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fountains
Molecules
Communication
DNA
Packet loss

Morphological analysis using geometric parameters for splenic aneurysms

Kimura, M., Hoshina, K., Kobayashi, M., Yamamoto, S., Ohshima, M. & Watanabe, T. 2018 Feb 1 In : Asian Cardiovascular and Thoracic Annals. 26, 2, p. 133-138 6 p.

Research output: Contribution to journalArticle

Morphological changes and device migration after stent graft insertion ― Clinical application of an image-based modeling system and analysis with geometric parameters

Nemoto, Y., Hoshina, K., Kobayashi, M., Kimura, M., Yamamoto, S., Watanabe, T. & Ohshima, M. 2018 Jan 1 In : Circulation Journal. 82, 1, p. 176-182 7 p.

Research output: Contribution to journalArticle

Multicycle Indentation for Evaluation of Polymer Material Viscoelastic Characteristics

Kato, K., Kishibe, S., Sakaue, K. & Yoshimoto, T. 2018 Feb 15 (Accepted/In press) In : Experimental Mechanics. p. 1-8 8 p.

Research output: Contribution to journalArticle

Creep testing
Materials testing
Tensile testing
Viscoelasticity
Indentation

Multi-phase inverter-fed MATRIX motor for high efficiency driving

Hijikata, H., Sakai, Y., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A. 2018 Jan 1 In : ieej transactions on industry applications. 138, 3, p. 257-264 8 p.

Research output: Contribution to journalArticle

Electric inverters
Bridge circuits
Electric drives
Synchronous motors
Permanent magnets
1 Citations

Muscle size-strength relationship including ultrasonographic echo intensity and voluntary activation level of a muscle group

Akagi, R., Suzuki, M., Kawaguchi, E., Miyamoto, N., Yamada, Y. & Ema, R. 2018 Mar 1 In : Archives of Gerontology and Geriatrics. 75, p. 185-190 6 p.

Research output: Contribution to journalArticle

activation
regression
regression analysis

Nanoscale insights into enhanced Raman spectroscopy

Rzeznicka, I. I. & Horino, H. 2018 Apr 18 Raman spectroscopy. p. 67-89

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access

N−C Axially Chiral Anilines: Electronic Effect on Barrier to Rotation and A Remote Proton Brake

Iwasaki, Y., Morisawa, R., Yokojima, S., Hasegawa, H., Roussel, C., Vanthuyne, N., Caytan, E. & Kitagawa, O. 2018 Mar 20 In : Chemistry - A European Journal. 24, 17, p. 4453-4458 6 p.

Research output: Contribution to journalArticle

Accessories

Nitrogen supersaturation process in the AISI420 martensitic stainless steels by low temperature plasma nitriding

Farghali, A. & Aizawa, T. 2018 Jan 1 In : ISIJ International. 58, 3, p. 401-407 7 p.

Research output: Contribution to journalReview article

Pebble bed reactors
Martensitic stainless steel
Thermistors
Nitriding
Supersaturation

Noise discrimination method for partial discharge current focused on damped oscillation waveform

Torii, H., Hayase, Y., Yamashiro, K. & Matsumoto, S. 2018 Jan 1 In : IEEJ Transactions on Fundamentals and Materials. 138, 2, p. 64-70 7 p.

Research output: Contribution to journalArticle

Partial discharges
Acoustic noise
Wavelet transforms
Insulation
Fourier transforms

Noise Discrimination Method for Partial Discharge Current Focused on Damped Oscillation Waveform

Torii, H., Hayase, Y., Yamashiro, K. & Matsumoto, S. 2018 Jun 1 In : Electronics and Communications in Japan. 101, 6, p. 3-10 8 p.

Research output: Contribution to journalArticle

Partial discharges
discrimination
waveforms
oscillations
Electric instrument transformers

Non-contact and non-destructive Lamb wave generation using laser-induced plasma shock wave

Hosoya, N., Yoshinaga, A., Kanda, A. & Kajiwara, I. 2018 May 1 In : International Journal of Mechanical Sciences. 140, p. 486-492 7 p.

Research output: Contribution to journalArticle

Plasma shock waves
Xerogels
Lamb waves
wave generation
Surface waves

Numerical analysis of single and multiple particles of Belchatow lignite dried in superheated steam

Zakrzewski, M., Sciazko, A., Komatsu, Y., Akiyama, T., Hashimoto, A., Kaneko, S., Kimijima, S., Szmyd, J. S. & Kobayashi, Y. 2018 Mar 8 (Accepted/In press) In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. p. 1-16 16 p.

Research output: Contribution to journalArticle

Strontium titanates
Moisture determination
lignite
drying apparatus
Calorific value

On-site verification of real-time checking system for improved range by high-pressure injecting ground improvement

Hashida, H., Inazumi, S., Chuman, T. & Okamoto, I. 2018 Jan 1 In : International Journal of GEOMATE. 14, 41, p. 167-172 6 p.

Research output: Contribution to journalArticle

ground improvement
Water quality
Visualization
Soils
Time measurement

Opinion mining on book review using CNN-L2-SVM algorithm

Rozi, M. F., Mukhlash, I., Soetrisno & Kimura, M. 2018 Mar 22 In : Journal of Physics: Conference Series. 974, 1, 012004

Research output: Contribution to journalConference article

Support vector machines
Neural networks
learning
natural language processing
products
1 Citations

Participation in a virtual reality concert via brainwave and heartbeat

Horie, R., Wada, M. & Watanabe, E. 2018 Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2017 International Conference on Affective and Pleasurable Design, 2017. Springer Verlag, Vol. 585, p. 276-284 9 p. (Advances in Intelligent Systems and Computing; vol. 585)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Watches
Electroencephalography
Servers
Display devices

Penetration behavior of chemical grouting considering ground uncertainty

Shishido, K. I., Hashida, H., Inazumi, S. & Soralump, S. 2018 Jan 1 In : International Journal of GEOMATE. 14, 45, p. 22-27 6 p.

Research output: Contribution to journalArticle

ground improvement
Grouting
grouting
penetration
uncertainty

Perceived distance as a reflection of an organizational culture of learning from failure

Nakamura, J. & Nagayoshi, S. 2018 Feb 9 2017 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2017. IEEE Computer Society, Vol. 2017-December, p. 171-175 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Personnel
Industry
Organizational culture
Employees
Self-reflection