Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
1800

Nontraditional mechanical alloying by the controlled plastic deformation, flow and fracture processes.

Aizawa, T., Kihara, J. & Benson, D. J., 1800, In : Materials Transactions, JIM.. 36 (1995), p. 138-149

Research output: Contribution to journalArticle

Normal and anormal microstructure of plasma nitrided Fe-Cr alloys.

Granito, N., Kuwahara, H. & Aizawa, T., 1800, In : J. Materials Science.. 37 (2002), p. 835-844

Research output: Contribution to journalArticle

Parallel Constraint Logic Programming Language GDCC and Its Parallel Constraint Solvers

Terasaki, S., Hawley, D. J., Sawada, H., Satoh, K., Menju, S., Kawagishi, T., Iwayama, N. & Aiba, A., 1800, In : ICOT Technical Report.

Research output: Contribution to journalArticle

Phase Separation into Nano-crystalline Nitrides in Ternary Ti-Si-N System via N Implantation.

Muraishi, S. & Aizawa, T., 1800, In : Materials Science Forum,. 475-479 (2004), p. 3651-3654

Research output: Contribution to journalArticle

Plasma nitriding as an environmentally benign surface structuring process.

Aizawa, T. & Kuwahara, H., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1303-1310

Research output: Contribution to journalArticle

Plasma nitriding design for aluminum and aluminum alloys

Visuttipitukul, P. & Aizawa, T., 1800, In : Surface Engineering. 22, p. 187-195

Research output: Contribution to journalArticle

Plasma nitriding of cold-pressed and BMA-forged Al compacts.

P.Visuttipitukul, P. V., Aizawa, T., Kondoh, K. & Kuwahara, H., 1800, In : Jpn. J. Powder and Powder Metallurgy.. 49 [11] (2002), p. 1028-1035

Research output: Contribution to journalArticle

Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution.

Kuwahara, H., Y.Al-Abdullat, Y. A-A., Mazaki, N., Tsutsumi, S. & Aizawa, T., 1800, In : Materials Transactions.. 42 [7] (2001), p. 1317-1321

Research output: Contribution to journalArticle

Proceedings of FGCS'92 Workshop on Constraint Logic Programming

Aiba, A., 1800, In : ICOT Technical Memo.

Research output: Contribution to journalArticle

Processing and characterization of alumina wire by controlled fracture forming process: (I) Forming behavior and evolution of green microstructure.

Du, W. B., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A316 (2001), p. 238-247

Research output: Contribution to journalArticle

Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties.

Du, W. B., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A316 (2001), p. 248-257

Research output: Contribution to journalArticle

Progressive steps in the platform science and technology for advanced magnesium alloys..

Kojima, Y., Aizawa, T., Kamado, S. & Higashi, K., 1800, In : Materials Science Forum. 419-422 (2003), p. 3-20

Research output: Contribution to journalArticle

"Proposal of Virtual Transportation as an Idealized Alternative in Consumption Society."

Horiuchi, Y., 1800, In : Systems: Journal of Transdisciplinary Science. 5(2000), p. 61-73

Research output: Contribution to journalArticle

Protein Structure Prediction Based on Multi-Level Description

Onizuka, K., Tsuda, H., Ishikawa, M. & Aiba, A., 1800, In : ICOT Technical Report.

Research output: Contribution to journalArticle

Pseudo surface wave on the (1012) plane of sapphire.

Xu, Y. & Aizawa, T., 1800, In : J. Applied Physics.. 86 [11] (1999), p. 6507-6511

Research output: Contribution to journalArticle

Quantitative nondestructive characterization of visco-elastic materials at high pressure.

Aizawa, T., Ohno, J. & Kihara, J., 1800, In : Composites for the Pressure Vessel Industry.. ASME PVP-302 (1995), p. 121-140

Research output: Contribution to journalArticle

Quantitative Nondestructive Evaluation of Surface Roughness Using Ultrasonic Reflectivity and Surface Wave Velocity.

Aizawa, T. & Ihara, I., 1800, In : Ceramic Transaction.. 89 (1998), p. 159-170

Research output: Contribution to journalArticle

Quantitative nondestructive evaluation on the ceramic coating by the acoustic spectro microscopy.

Aizawa, T., Ito, M. & Kihara, J., 1800, In : Japanese J. Tribology.. 40-3 (1995), p. 171-179

Research output: Contribution to journalArticle

Reaction-induced phase separation from supersaturated solid solution to nitride in thin films.

Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In : Surface Coating Technology.. 188-189 (2004), p. 431-434

Research output: Contribution to journalArticle

Reaction synthesis of refractory disilicides by mechanical alloying and shock reactive synthesis techniques.

Yen, B. K., Aizawa, T., Kihara, J. & Sakakibara, N., 1800, In : Materials Science and Engineering. A239-240 (1997), p. 515-521

Research output: Contribution to journalArticle

Resintering behavior of alumina compact on the route of controlled fracture forming.

W.B.Du, W. B. D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Default journal. 46 [2] (1999), p. 125-130

Research output: Contribution to journalArticle

Shock compaction of Al-based nanocrystal materials using on ion-beam device.

Tsuchida, M., Aizawa, T. & K.Horioka, K. H., 1800, In : J. Materials Processing Technology.. 85 (1998), p. 148-152

Research output: Contribution to journalArticle

Shock reactive synthesis of (Mo, Ti) sillicides from pretreated powders.

Aizawa, T., Sakakibara, N., Yen, B. K. & Syono, Y., 1800, In : Ceramic Transaction (Innovative Processing and Synthesis of Ceramics). 87 (1997), p. 135-142

Research output: Contribution to journalArticle

Shock reactive synthesis of refractory metal aluminides from a mechanically alloyed precursor.

Aizawa, T., Asakawa, Y. & Kihara, J., 1800, In : Ann. Chim.. 20 (1995), p. 181-196

Research output: Contribution to journalArticle

Shock reactive synthesis of TiAl.

Aizawa, T., Kamenosono, S., Kihara, J., Kato, T., Tanaka, K. & Nakayama, Y., 1800, In : J. Intermetallics.. 3 (1995), p. 369-379

Research output: Contribution to journalArticle

Smoothed Particle Modeling for Ceramic Injection Molding.

Iwai, T., Aizawa, T. & Kihara, J., 1800, In : Ceramic Transaction (Computational Modeling of Materials and Processing). 79 (1998), p. 167-172

Research output: Contribution to journalArticle

Solid state recycle processing for magnesium alloy wastes via direct hot forging.

Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In : Materials Transactions.. 43 [3] (2002), p. 322-325

Research output: Contribution to journalArticle

Solid state recycling of recyclable aluminum wastes with in-process microstructure control.

Aizawa, T., Luangvaranunt, T. & Kondoh, K., 1800, In : Materials Transaction.. 43 [3] (2002), p. 315-321

Research output: Contribution to journalArticle

Solid-state synthesis of hydrogen storage Mg2Co alloys via bulk mechanical alloying

Wang, Y., Aizawa, T. & Nishimura, C., 1800, In : Materials Transactions. 47, p. 1052-1057

Research output: Contribution to journalArticle

Solid-state synthesis of magnesium alloys.

Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 299-310

Research output: Contribution to journalArticle

Solid-state synthesis of magnesium thermoelectric alloys via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : MRS Symposium Proceedings. 980 (2007), p. 205-210

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si1-xYx (Y = Ge and Si) thermoelectric materials via bulk mechanical alloying.

R.Song, R. S., Aizawa, T., Yamamoto, A. & Obara, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 347-350

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si from Mg-Si mixture powder.

Kondoh, K., Oginuma, H., Yuasa, E. & Aizawa, T., 1800, In : Materials Transactions.. 42 (2001), p. 1293-1300

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process

Kondoh, K., Yuasa, E. & Aizawa, T., 1800, In : Materials Science Forum.. 419-422 (2003), p. 419-422

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2Si via bulk mechanical alloying.

Aizawa, T. & Ichige, K-I., 1800, In : Materials Science Forum.. 351 (2000), p. 333-338

Research output: Contribution to journalArticle

Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying.

Aizawa, T. & Song, R., 1800, In : Mater. Sci. Forum..

Research output: Contribution to journalArticle

Solid-state synthesis of Mg-Si-Ge ternary thermoelectric materials..

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions. 46 [7] (2005), p. 1490-1496

Research output: Contribution to journalArticle

Solid state synthesis of non-equilibrium phase in Mg-Co and Mg-Fe systems via bulk mechanical alloying..

Aizawa, T., Hasehira, K-I. & Nishimura, C., 1800, In : Materials Transactions.. 44 [4] (2003), p. 601-610

Research output: Contribution to journalArticle

Steel Powder Compaction and Forming Analysis.

Tamura, S., Aizawa, T., Mitsuno, T. & Kihara, J., 1800, In : The International Journal of Powder Metallurgy.. 34 [1] (1998), p. 1-11

Research output: Contribution to journalArticle

Structure of surface wave on coarse-grained nickel by acoustic spectro-microscopy.

Yu, Y., Aizawa, T. & Kihara, J., 1800, In : Material Transactions, JIM.. 37 (1996), p. 1690-1698

Research output: Contribution to journalArticle

Superplastic forging analysis by the multi-level modeling.

Aizawa, T., 1800, In : Materials Science Form.. 306 (1999), p. 621-630

Research output: Contribution to journalArticle

Superplastic injection forming of magnesium alloys.

Aizawa, T. & Mabuchi, M., 1800, In : Materials Science Forum.. 357 (2001), p. 35-40

Research output: Contribution to journalArticle

Surface controlled materials evaluation for Al-implanted Ni alloys.

Aizawa, T., Mitsuo, A. & Kihara, J., 1800, In : Nondestructive Characterization of Materials.. VI (1994), p. 13-20

Research output: Contribution to journalArticle

Surface nano-structuring of Zr thin film via Ni-implantation.

Muraishi, S. & Aizawa, T., 1800, In : J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 65-68

Research output: Contribution to journalArticle

Surface reaction of magnesium in Hank's solutions.

Aizawa, T., 1800, In : Materials Science Forum.. 351 (2000), p. 349-358

Research output: Contribution to journalArticle

Surface wave velocity determination by using reflection coefficient method on the liquid - anisotropic - solid interface.

Xu, Y. & Aizawa, T., 1800, In : J. Acoustic Society, America.. 107 [3] (2000), p. 1777-1780

Research output: Contribution to journalArticle

Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A220 (1996), p. 8-14

Research output: Contribution to journalArticle

Synthesis of Mg2Ni alloy by bulk mechanical alloying.

Aizawa, T., Kuji, T. & Nakano, H., 1800, In : J. Alloys and Compounds.. 291 (1999), p. 248-253

Research output: Contribution to journalArticle

T. Aizawa, R. Song and A. Yamamoto: Solid state synthesis of ternary thermoelectric magnesium alloy, Mg2Si1-xSnx.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In : Materials Transactions.. 47 [4] (2006), p. 1058-1065

Research output: Contribution to journalArticle