Search concepts
|
Selected filters
|
- 20,750 - 20,800 out of 24,085 results
Search results
-
Study on heat of hydration for cementitious materials focus on ground granulated blast-Furnace slag
Iyoda, T., Kaneyasu, S. & Dan, Y., 2006, Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. p. 725-730 6 p. (Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on heat transfer characteristics of loop heat pipe for solar collector
Sato, S., Hirasawa, S., Kawanami, T. & Shirai, K., 2012 Dec 1, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. p. 1573-1581 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A, B, C, D).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study on high frequency inverter with 100kHz current feedback control by using FPGA
Amano, S. & Akatsu, K., 2014 Jan 1, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014. Institute of Electrical and Electronics Engineers Inc., p. 3392-3397 6 p. 7014078. (2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Study on highly efficient machining by small-diameter radius end mill (2nd report)-effect of pick feed on machining characteristic in the reciprocating cutting
Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2020, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 86, 1, p. 99-105 7 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Study on highly efficient machining by small-diameter radius end mill -cutting efficiency of face cutting and side cutting in high speed milling
Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2019, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 365-373 9 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel
Kimura, T., Sawa, T. & Kamijyo, T., 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel
Kimura, T., Sawa, T. & Kamijyo, T., 2017, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel
Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study on improvement of accuracy in end mill machining
Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 Dec 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on input motion and dynamic response for undamaged RC school building during the 2004 Niigata-ken Chuetsu Earthquake
Hijikata, K., Sugiyama, T., Tokumitsu, R., Yamazoe, M., Koyamada, K., Okano, H. & Miyamoto, Y., 2008 Sep, In: Journal of Structural and Construction Engineering. 73, 631, p. 1519-1527 9 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Study on Intraction between Surface end Subsurface Flows using Conjunctive Flow Model
MORITA, M., MORI, M., A, A. & Yen, B. C., 2000 May 8, In: Groundwater Updates (Springer). p. 22-28Research output: Contribution to journal › Article › peer-review
-
Study on investigate of environmental technology about housing in China: Take notice of solar heat utilization technology and insulation technology
Zhao, Y., Kim, Y., Seike, T. & Akimoto, T., 2012, In: AIJ Journal of Technology and Design. 18, 39, p. 645-649 5 p.Research output: Contribution to journal › Review article › peer-review
-
Study on Kawaii Colors of Virtual Objects in The Reign of Catz & Dogz 2009
Ohkura, M., Goto, S., Murai, S. & Aoto, T., 2009 Apr 5, In: A one day workshop at ACM CHI, Boston.Research output: Contribution to journal › Article › peer-review
-
Study on long-term occupancy records of public rental housing
Minami, K., Ohi, K. & Takenoshita, Y., 2022 Apr, In: Japan Architectural Review. 5, 2, p. 179-191 13 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via
Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 85 1 p. 7947481. (Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on Magnetic Flux Dissipation and Field-Trapping Performance of HTS Bulk-Shaped Magnesium Diboride in Pulse-Field Magnetizing Processes
Oka, T., Takeda, A., Oki, H., Ogawa, J., Fukui, S., Scheiter, J., Häßler, W., Yokoyama, K., Yamanaka, K., Dadiel, L., Miryala, M., Sakai, N., Murakami, M. & Noudem, J., 2019 Aug, In: IEEE Transactions on Applied Superconductivity. 29, 5, 8678817.Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Study on magnetic separation system using high Tc superconducting bulk magnets for water purification technique
Oka, T., Kanayama, H., Tanaka, K., Fukui, S., Ogawa, J., Sato, T., Yamaguchi, M., Ooizumi, M., Yokoyama, K. & Noto, K., 2009, In: Journal of Physics: Conference Series. 156, 012031.Research output: Contribution to journal › Article › peer-review
Open Access8 Citations (Scopus) -
Study On Making City Model With Image And Laser Range Data
NAKAGAWA, M., SHIBASAKI, R. & KAGAWA, Y., 2001 Nov 1, In: Default journal.Research output: Contribution to journal › Article › peer-review
-
Study on making Klima-atlas with citizen participation: - Walking tour with citizens to experience and measure the urban thermal environment
Masuda, Y., Okadome, S., Kagiya, K., Takaguchi, H., Takahashi, N. & Ojima, T., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 215-219 5 p.Research output: Contribution to journal › Article › peer-review
-
Study on Metallic Particle Motion and Partial Discharge Characteristics in a GIS Tank Filled with CO2 and SF6
Onomoto, M., Nishimura, T., Teshima, T., Ohtsuka, S., Matsumoto, S., Hikita, M., Tsuru, S. I. & Tanimura, A., 2005, In: The transactions of the Institute of Electrical Engineers of Japan.A. 125, 1, p. 71-76 6 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Study on Metallic Particle Motion and Particle Discharge Characteristics in a GIS Tank Filled with CO2 and SF6
Onomoto, M., Nishimura, T., Teshima, T., Ohtsuka, S., Matsumoto, S., Tanimura, S. TA. & Hikita, M., 2005 Jan 1, In: IEEJ Trans. FM. 125-A, p. 71-76Research output: Contribution to journal › Article › peer-review
-
Study on mobility enhancement in MOVPE-grown AlGaN/AlN/GaN HEMT structures using a thin AlN interfacial layer
Miyoshi, M., Egawa, T. & Ishikawa, H., 2006 Sep, In: Solid-State Electronics. 50, 9-10, p. 1515-1521 7 p.Research output: Contribution to journal › Article › peer-review
22 Citations (Scopus) -
Study on mobility mechanism using earth pressure to traverse loose soil with steep slope for Lunar exploration robot
Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, MOVIC 2014 - 12th International Conference on Motion and Vibration Control. Japan Society of Mechanical EngineersResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on Modeling of Interaction between Surface and Subsurface Flows in Urban Watershed
MORITA, M., 2004 Aug 1, In: Conference Proceedings UDM04. p. 551-559Research output: Contribution to journal › Article › peer-review
-
Study on model predictive control to minimize temperature change at multi positions in vertical plate with varying heat generation
Hirasawa, S., Kawanami, T. & Shirai, K., 2014.Research output: Contribution to conference › Paper › peer-review
-
Study on molecular behavior in oxidation of insulating oil using terahertz spectroscopy
Nishimura, N., Ogura, R., Matsumoto, S., Mizuno, M. & Fukunaga, K., 2011 Dec 5, In: IEEJ Transactions on Fundamentals and Materials. 131, 11, p. 943-948 6 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Study on multi-sensor unit for monitoring of living space environment and classification of daily activities
Hirasawa, K. & Saitoh, A., 2009 Dec 1, 2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration. p. 101-106 6 p. 5384549. (2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Study on optimal design of high temperature superconducting coil based on AC loss minimization
Fukui, S., Ohsugi, K., Nishijyo, T., Ogawa, J., Oka, T., Yamaguchi, M., Sato, T., Furuse, M., Takao, T. & Tsukamoto, O., 2008 Jun, In: IEEE Transactions on Applied Superconductivity. 18, 2, p. 1366-1369 4 p., 4510854.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
Study on optimization design of superconducting magnet for magnetic force assisted drug delivery system
Fukui, S., Abe, R., Ogawa, J., Oka, T., Yamaguchi, M., Sato, T. & Imaizumi, H., 2007 Oct 1, In: Physica C: Superconductivity and its applications. 463-465, SUPPL., p. 1315-1318 4 p.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
Study on output characteristics of a scroll blood pump
Kabei, N., Tashiro, R. & Tsuchiva, K., 1997 May 6, In: Japanese Journal of Artificial Organs. 26, 2, p. 315-320 6 p.Research output: Contribution to journal › Article › peer-review
-
Study on performance improvements of a high-temperature superconducting coil with a lattice-shape cross section
Ishiguri, S., Oka, T., Fukui, S., Ogawa, J. & Sato, T., 2008 Jul 15, In: Physica C: Superconductivity and its applications. 468, 14, p. 1028-1031 4 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Study on periodic thermal-switching behavior of flat heat pipe
Hirasawa, S., Nakamu, T., Kawanami, T. & Shirai, K., 2015, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8B-2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Study on planetary rover using earth pressure to traverse loose soil with steep slope
Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, 18th International Conference of the ISTVS. International Society for Terrain Vehicle SystemsResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on possible double peaks in cutoff frequency characteristics of AlGaAs/GaAs HBTs by energy transport simulation
Okada, T. & Horio, K., 1998, In: VLSI Design. 8, 1-4, p. 437-442 6 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Study on quality evaluation test for adhesion of adhesives used for post - Installed adhesive anchor
Sato, K., Akiyama, T. & Hamasaki, H., 2019, In: Journal of Structural and Construction Engineering. 84, 759, p. 587-595 9 p.Research output: Contribution to journal › Article › peer-review
-
Study on Radiation Transfer in Human Skin
Yamada, J., Kawamura, A., Miura, Y., Takata, S. & Ogawa, K., 2004 Jul 1, In: Thermal Science and Engineering. 12, p. 125-126Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Study on radiation transfer in human skin for cosmetics
Yamada, J., Kawamura, A., Miura, Y., Takata, S. & Ogawa, K., 2005 Jun 15, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 93, 1-3 SPEC. ISS., p. 219-230 12 p.Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus) -
Study on reduction in radiated emissions from PCB using test LSI
Haga, S., Nakano, K., Sudo, T. & Hashimoto, O., 2003 Feb 20, In: Microwave and Optical Technology Letters. 36, 4, p. 238-242 5 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Study on refurbishment utilizing the subsidy system of existing building for energy conservation
Aozasa, K., Akimoto, T., Seike, T., Washizaki, M. & Ohta, H., 2012, In: AIJ Journal of Technology and Design. 18, 39, p. 627-632 6 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Study on relationship between technostress and antisocial behavior on computers
Kasuga, N., Itoh, K., Oishi, S. & Nagashima, T., 2004 Jun, In: IEICE Transactions on Information and Systems. E87-D, 6, p. 1461-1465 5 p.Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Study on Relationship between Traveling State and Chassis Strain at Traveling Loose Soil for Rovers
Inaba, K. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Study on Rotational Barrier of N-C Axially Chiral Compounds: Remarkable Increase in the ROtational Barrier by Aromatization
Suzumura, N., Kageyama, M., Dobashi, Y. & Kitagawa, O., 2012 May 17, In: Default journal.Research output: Contribution to journal › Article › peer-review
-
Study on scenarios towards low carbon society in residential sector
Iwata, T., Kuwasawa, Y., Murakami, S. & Ikaga, T., 2011 Sep, In: Journal of Environmental Engineering. 76, 667, p. 839-846 8 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Study on separation of Eu(II) from trivalent rare earths via electro-reduction and ion exchange
Jelinek, L., Wei, Y., Arai, T. & Kumagai, M., 2008 Feb 28, In: Journal of Alloys and Compounds. 451, 1-2, p. 341-343 3 p.Research output: Contribution to journal › Article › peer-review
16 Citations (Scopus) -
Study on shape creation of building's roof by evaluating aesthetic sensibility
Tsutsumi, K. & Sasaki, K., 2008 May 1, In: Mathematics and Computers in Simulation. 77, 5-6, p. 487-498 12 p.Research output: Contribution to journal › Article › peer-review
17 Citations (Scopus) -
Study on sleep environment by difference of air-conditioning in summer: Influence of total heat exchange type whole-house air-conditioning ventilation system
Iwaki, A., Akimoto, T. & Furuhashi, T., 2020, In: Journal of Environmental Engineering. 85, 777, p. 871-880 10 p.Research output: Contribution to journal › Article › peer-review
-
STUDY ON SPHERICAL FOIL BEARING.
Mizukawa, M., Hosaka, H. & Hara, S., 1985 Sep, In: Bulletin of the JSME. 28, 243, p. 2105-2111 7 p.Research output: Contribution to journal › Article › peer-review
-
STUDY ON SPHERICAL FOIL BEARING.
Mizukawa, M. & Ono, K., 1985, In: Bulletin of the JSME. 28, 243, p. 2097-2104 8 p.Research output: Contribution to journal › Article › peer-review
Open Access12 Citations (Scopus) -
STUDY ON SPHERICAL FOIL BEARING - 1. ANALYSIS FOR PERFECTLY FLEXIBLE FOIL.
Ono, K. & Mizukawa, M., 1980, In: Bulletin of the JSME. 23, 178, p. 574-581 8 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
STUDY ON SPHERICAL FOIL BEARING - 2. ANALYSIS INCLUDING FOIL BENDING STIFFNESS AND ITS EXPERIMENTAL VERIFICATION.
Ono, K. & Mizukawa, M., 1981, In: Bulletin of the JSME. 24, 198, p. 2162-2168 7 p.Research output: Contribution to journal › Article › peer-review
Open Access3 Citations (Scopus)